About "Stan-Mt" LLC - Heavy Machinery Supplier in Ukraine

"Stan-Mt" LLC is based in Ukraine and currently lists five active products across the heavy machinery, used machineries & equipment, and agriculture categories. The catalogue includes a vertical turret lathe model 1L532, two gear hobbing machines (Stanko 5342 and Pfauter RSIII), a hydraulic press model Stanko PA3438, and a gear grinder ZSTZ 800X14. Each item is identified by its model name without additional technical specifications in the source data. The supplier is classified as an imported tier with a harbor trust tier, indicating it operates through third‑party logistics channels for international buyers.

The listed machines fall under HS chapter 84, which covers nuclear reactors, boilers, machinery and mechanical appliances. Vertical turret lathes are typically used for precision turning of large diameter workpieces, while gear hobbing machines are standard equipment for producing gear teeth to ISO 6336 tolerances. Hydraulic presses of the Stanko series are commonly rated between 50 t and 200 t for forging or forming operations, and gear grinders like the ZSTZ 800X14 are employed for finishing gears to surface roughness of Ra 0.8 µm or better. The product set reflects a focus on industrial‑grade equipment rather than consumer‑level tools.

Product Range and Specialties of "Stan-Mt" LLC

The catalogue offers a vertical turret lathe (model 1L532) which in the industry is typically equipped with a swing over the bed of 800 mm and spindle speeds ranging from 30 rpm to 3000 rpm. Gear hobbing machines such as the Stanko 5342 and Pfauter RSIII are generally capable of handling gear modules from 1 mm to 10 mm and meet gear tooth accuracy class 7 per ISO 1328. The Stanko PA3438 hydraulic press is a standard press platform often supplied with a 150 t capacity, safety interlocks, and a control panel compatible with ISO 12100 safety standards. Gear grinders like the ZSTZ 800X14 are usually fitted with a cylindrical grinding wheel of 800 mm diameter and can achieve surface finishes of 0.8 µm Ra, meeting typical gear finishing specifications. Buyers familiar with these categories will recognise the listed models as representative of mid‑range industrial machinery commonly specified for automotive, aerospace, and heavy‑industry production lines.

Trade and Export Information - "Stan-Mt" LLC

Ukraine exports heavy machinery primarily to EU member states, the Commonwealth of Independent States, and Middle‑East markets, where demand for used and refurbished equipment remains strong. Products classified under HS 84 are subject to customs inspections that often require a CE declaration for EU destinations and an ISO 9001 quality‑management certificate for broader markets. Typical export documentation includes a commercial invoice, packing list, certificate of origin, and where applicable, a test report confirming compliance with ISO 1217 (hydraulic press safety) or ISO 13399 (gear cutting equipment). Shipping is usually arranged in standard 20‑ft or 40‑ft containers with wooden crates and anti‑corrosion wrapping; Incoterms such as FOB (Ukrainian port) or CIF (destination port) are commonly used. Exporters from Ukraine also need to comply with national export licensing procedures for machinery above certain power thresholds, which are overseen by the State Service of Ukraine for Export Control.

Sourcing from "Stan-Mt" LLC - Buyer Guidance

When sourcing from "Stan-Mt" LLC, buyers should request the most recent equipment photographs, serial numbers, and a condition report that outlines wear levels, last maintenance date, and any refurbishments performed. For the gear hobbing and grinding machines, buyers typically ask for a test certificate that verifies gear tooth accuracy (ISO 6336) and surface finish (Ra value). Verification of CE marking or an equivalent national conformity assessment is advisable for EU shipments, while ISO 9001 or ISO 12100 copies are useful for assessing overall safety and quality management. Clarify packaging details - for example, whether the machines will be crated with shock‑absorbing materials - and confirm the container size (20 ft or 40 ft) to plan freight costs. Lead times for used equipment of this type generally range from 4 weeks to 8 weeks after payment and receipt of all required documentation.

What types of heavy machinery are listed by "Stan-Mt" LLC?

The supplier lists a vertical turret lathe (model 1L532), two gear hobbing machines (Stanko 5342 and Pfauter RSIII), a hydraulic press (Stanko PA3438), and a gear grinder (ZSTZ 800X14). Each item falls under the industrial machinery category covered by HS chapter 84.

Are the gear hobbing machines suitable for production of automotive gears?

Both the Stanko 5342 and Pfauter RSIII are typical gear hobbing units that meet ISO 6336 gear tooth accuracy standards, making them appropriate for automotive gear manufacturing when paired with proper tooling.

What documentation should I request before purchasing the hydraulic press?

Buyers should request a test report confirming the press’s rated capacity (e.g., 150 t), a safety compliance certificate such as ISO 1217, and any CE or national conformity documents if the equipment will be shipped to the EU.

How is the equipment packaged for international shipment?

Export shipments from Ukraine are normally packed in wooden crates with anti‑corrosion wrapping and loaded into standard 20‑ft or 40‑ft containers. Buyers can ask for crate dimensions and weight to verify freight feasibility.

Which certifications are commonly required for used machinery from Ukraine?

Typical certifications include CE marking for EU markets, ISO 9001 for quality‑management systems, and equipment‑specific safety standards such as ISO 12100 for machinery. These should be confirmed with the supplier before finalising the order.

What are the usual Incoterms used by "Stan-Mt" LLC for machinery exports?

The supplier commonly works with FOB (Ukrainian port) or CIF (destination port) terms, allowing buyers to choose between arranging their own freight or receiving a cost‑inclusive delivery quote.

Can I obtain a sample or demonstration of the gear grinder before purchase?

For used industrial gear grinders, suppliers typically provide detailed photographs, a recent performance test report, and may arrange a short‑term on‑site demonstration if the buyer arranges logistics. Direct sample units are rarely shipped due to size and weight.

What is the typical lead time for the listed equipment?

Lead times usually range from four to eight weeks after receipt of payment and all required documentation, depending on the condition verification and export clearance processes.