About Shree Ji Steel Private Limited - Bar Products Supplier in India

Based in Kolkata, West Bengal, India, Shree Ji Steel Private Limited currently lists ten active product entries in its catalogue. The catalogue covers a variety of mild‑steel bar and profile items, including TMT bars, angles, channels, beams, round and square bars, flat bars, pipes, wire, and both plain and chequered plates. Each product is identified with an HS code, for example TMT bars, MS angle and MS beam share HS code 6291903675, while MS channel is listed under 7216.10. The material designation for all entries is mild steel, with some entries noting MS steel or mild steel explicitly. The supplier’s top‑level categories such as Grab Bars, Handrails & Fittings, Aluminum Bars, Brass Bars, Stainless Steel Ice Bucket, Bar Products and Bar Accessories reflect the broader application fields for these steel profiles.

Product Range and Specialties of Shree Ji Steel Private Limited

The catalogue’s TMT bars are typically produced to Indian Standard IS 1786, with yield strengths of 415 MPa (Fe 415) and 500 MPa (Fe 500) and are supplied in lengths of 12 m or 6 m depending on order size. MS angles and channels conform to IS 2062, offering thicknesses from 3 mm to 25 mm and standard leg lengths of 50 mm, 75 mm, 100 mm and 150 mm. MS beams follow IS 2062 specifications for I‑sections, with depth ranges from 150 mm to 300 mm and flange widths proportionate to depth. Round bars and square bars are commonly offered in diameters from 6 mm to 40 mm and side dimensions from 8 mm to 50 mm, respectively, with tensile strength around 250 MPa. Flat bars, plates and chequered plates are supplied in widths up to 1500 mm, thicknesses from 4 mm to 20 mm, and the chequered surface is used for anti‑slip applications. MS pipes listed under HS 7306.30 are usually seamless or welded, with nominal diameters from 20 mm to 200 mm and wall thicknesses complying with IS 1239.

Trade and Export Information - Shree Ji Steel Private Limited

India ranks among the top exporters of mild‑steel products, shipping large volumes to the Middle East, South‑East Asia, East Africa and selected European markets. The HS code families 72 and 73 used for the listed items are subject to standard customs duties and may require a Certificate of Origin and a Mill Test Report for verification. Importers typically request compliance with ISO 9001 quality management and, where structural use is intended, CE marking or equivalent national approvals. Packaging for bars, angles and plates is usually in steel bundles wrapped with steel wire, placed on wooden pallets, and loaded in 20‑ft or 40‑ft containers; pipes are often crated to prevent deformation. Common Incoterms for Indian steel exporters include FOB Kolkata Port and CIF destination ports, with freight rates calculated per container weight, which can reach up to 20 tonnes for bundled bar shipments.

Sourcing from Shree Ji Steel Private Limited - Buyer Guidance

Buyers should request a Mill Test Report that confirms chemical composition, tensile strength, yield point and dimensional tolerances for each steel grade. For TMT bars, verification against IS 1786 and the specific Fe 415 or Fe 500 grade is essential, while angles, channels and beams should be cross‑checked against IS 2062 specifications. Samples of surface finish, especially for chequered plates or anti‑slip bar accessories, help assess coating or treatment quality before bulk purchase. Confirm the HS code declared on the commercial invoice matches the product description to avoid customs delays, and verify whether the supplier can provide a Certificate of Origin for preferential duty treatment. Typical lead times for mild‑steel profiles from Indian mills range from 4 weeks for standard sizes to 8 weeks for custom dimensions, with minimum order quantities often expressed in metric tonnes rather than individual pieces.

What product categories are included in Shree Ji Steel's catalogue?

The catalogue contains ten mild‑steel items such as TMT bars, MS angles, MS channels, MS beams, round and square bars, flat bars, pipes, wire, and plain and chequered plates, each classified under the relevant HS codes from chapters 72 and 73.

Which HS codes are associated with the listed products?

The HS codes used are 6291903675 for TMT bars, angles and beams; 7216.10 for channels; 7214.99 for round bars; 7207.19 for square and flat bars; 7306.30 for pipes; 7217.10 for wire; and 7208.51 for plates and chequered plates.

What standards apply to the TMT bars offered by the supplier?

Indian TMT bars are normally manufactured to IS 1786, with yield strengths of 415 MPa (Fe 415) or 500 MPa (Fe 500) and are tested for elongation, bendability and chemical composition.

What documentation should a buyer request before placing an order?

Buyers should ask for a Mill Test Report, a Certificate of Origin, and any applicable quality‑management certificates such as ISO 9001; for structural applications, a CE conformity declaration may also be required.

How are the steel products typically packaged for export?

Bars and profiles are bundled, wrapped with steel wire, placed on wooden pallets, and loaded into 20‑ft or 40‑ft containers; plates are stacked on pallets with protective cardboard, and pipes are crated to prevent deformation.

Which regions most commonly import Indian mild‑steel products?

Major import destinations include the Middle East (UAE, Saudi Arabia), South‑East Asian countries (Bangladesh, Vietnam), East African markets (Kenya, Tanzania) and selected European countries that require structural steel.

What are typical lead times and minimum order quantities for these products?

Standard sizes are usually ready for shipment within four weeks, while custom dimensions may require up to eight weeks; minimum orders are generally expressed in metric tonnes, often starting from one to two tonnes per product type.