About Shree Bajrang Sales (P) Ltd. - Silicon Supplier in India

India‑based Shree Bajrang Sales (P) Ltd. lists ten distinct metal and mineral products in its catalogue. The portfolio covers ferro‑silicon variants, high carbon ferro‑chrome, fluorspar powder, ferro‑molybdenum, ferro‑phosphorus, aluminum notch bars, calcium silicide cored wire, nickel plates, and aluminum shots. The listed items fall under HS‑code families 7202 (ferro alloys), 7505 (nickel products), 7603‑7604 (aluminum products) and 2529 (fluorspar). The supplier’s top categories include Silicon, Other Ores & Minerals, Chrome Ore, Fluorspar, Aluminum Bars, Metal Wire, Nickel Plates and Aluminum Hardwares.

Among the ten entries, six have explicit HS codes: High Carbon Ferro Chrome (7202.41), Fluorspar Powder (2529.21), Ferro Molybdenum (7202.99), Ferro Phosphorus (7202.99), Calcium Silicide Cored Wire (7202.99), Nickel Plate (7505.11), Aluminum Notch Bar (7604.29) and Aluminum Shots (7603.10). The material specifications note minimum composition limits such as Cr ≥ 60 % and C 4‑8 % for ferro‑chrome, CaF₂ purity for fluorspar, Mo ≥ 60 % for ferro‑molybdenum, P 22‑28 % for ferro‑phosphorus, Al ≥ 96 % for aluminum products, and Ni ≥ 99.85 % for nickel plate. The catalogue does not provide HS codes for Ferro Silicon Calcium, Ferro Silicon, and the generic Calcium Silicide Cored Wire grouping, but they are classified within the same ferro‑alloy HS chapter.

Product Range and Specialties of Shree Bajrang Sales (P) Ltd.

The catalogue includes standard grades such as ferro‑silicon with silicon content typically 75‑85 % used as a deoxidizer in steelmaking, high carbon ferro‑chrome meeting ASTM B466 (Cr ≥ 60 %, C 4‑8 %), fluorspar powder generally ≥99 % CaF₂ for fluorochemical applications, ferro‑molybdenum with Mo ≥ 60 % conforming to ASTM B777, and ferro‑phosphorus containing 22‑28 % phosphorus also covered by ASTM B466. Aluminum notch bars are supplied as an Al‑Cu‑Si‑Mn alloy comparable to EN‑573‑3 grade 6060, while calcium silicide cored wire features a CaSi core (≈55 % CaSi) encased in a steel sheath for inoculation in cast iron. Nickel plates are electrolytic grade with Ni ≥ 99.85 % and are often used for plating according to ASTM B466, and aluminum shots (Al ≥ 96 %) are spherical particles employed in shot‑peening processes.

Packaging in the ferro‑alloy sector typically uses 25 kg woven polypropylene bags or 1 ton bulk bags, loaded into 20‑ft or 40‑ft containers. Fluorspar powder is shipped in moisture‑resistant bags, aluminum bars and notch bars are bundled and crated, and nickel plates are placed in wooden crates with protective film. Common quality certifications requested by buyers include ISO 9001 quality management, SGS or Bureau Veritas inspection certificates, and test reports that reference ASTM or EN standards.

Trade and Export Information - Shree Bajrang Sales (P) Ltd.

India is a major exporter of ferro alloys, industrial minerals and aluminum products, with primary destinations in China, Japan, South Korea, the European Union and the United States. HS‑code 7202 covers ferro‑silicon, ferro‑chrome, ferro‑molybdenum, ferro‑phosphorus and calcium silicide cored wire; 7505 applies to nickel plate; 7603‑7604 to aluminum shots and notch bars; and 2529 to fluorspar powder. Export shipments are usually quoted on FOB or CIF terms, packed in standard polypropylene bags, wooden crates or steel pallets, and loaded in 20‑ft or 40‑ft containers for sea freight.

Regulatory considerations include customs duties on ferro alloys, possible anti‑dumping duties, and export licences for mineral products such as fluorspar. Importers often require third‑party inspection reports (SGS, Bureau Veritas) and certificates of analysis that meet ASTM, ISO or EN specifications. Indian exporters commonly provide these documents alongside commercial invoices and packing lists to facilitate clearance in the buyer’s country.

Sourcing from Shree Bajrang Sales (P) Ltd. - Buyer Guidance

Buyers should request a current Certificate of Analysis that details elemental composition - for example Cr ≥ 60 % for ferro‑chrome, Mo ≥ 60 % for ferro‑molybdenum, P 22‑28 % for ferro‑phosphorus, and CaF₂ ≥ 99 % for fluorspar powder. The chemical analysis should be referenced to the applicable ASTM standard (e.g., ASTM B466 for ferro‑chrome, ASTM B777 for ferro‑molybdenum) and include moisture or impurity limits where relevant.

Packaging verification is essential; typical ferro‑alloy shipments use 25 kg polypropylene bags, fluorspar powder uses moisture‑proof bags, and nickel plates are crated with protective film. Minimum order quantities generally start at 1 metric ton for ferro alloys and 5 metric tons for aluminum shots, with lead times of 30‑45 days common for Indian producers, subject to customs clearance and freight scheduling.

What product codes are used for Shree Bajrang Sales' ferro alloys?

The catalogue lists High Carbon Ferro Chrome under HS 7202.41, Ferro Molybdenum and Ferro Phosphorus under HS 7202.99, and Calcium Silicide Cored Wire also under HS 7202.99. Other ferro‑alloys such as Ferro Silicon and Ferro Silicon Calcium fall within the same HS chapter 7202.

Which certifications are typically required for ferro‑chrome and ferro‑molybdenum imports?

Importers normally request ISO 9001 quality management certification and a third‑party inspection certificate (SGS or Bureau Veritas). The chemical composition should be verified against ASTM B466 for ferro‑chrome and ASTM B777 for ferro‑molybdenum.

What are the standard purity specifications for the Fluorspar Powder offered?

Industry standards expect calcium fluoride purity of at least 99 % with moisture content below 0.5 %. Buyers often ask for an ISO‑9001 certificate and a laboratory analysis report confirming these limits.

How is the Nickel Plate packaged for shipment?

Nickel plates (99.85 % Ni, HS 7505.11) are usually packed in wooden crates or steel pallets, each crate containing multiple plates wrapped in protective film. This packaging complies with standard export practice for metallic plates and fits into 20‑ft or 40‑ft containers.

What is the typical minimum order quantity for Aluminum Notch Bars?

Buyers generally place orders of at least 1 metric ton, which corresponds to the standard bulk shipment size for aluminum alloy bars. Smaller quantities can be accommodated only if the buyer arranges special packaging.

Which test reports should be requested for Calcium Silicide Cored Wire?

Request a Certificate of Analysis showing the calcium silicide core composition (typically CaSi ≥ 55 %) and the steel sheath grade. An SGS inspection report and compliance with ASTM B466 for the core material are also advisable.

What Incoterms are commonly used for shipments from India?

Exporters from India frequently operate on FOB (Free on Board) or CIF (Cost, Insurance, Freight) terms, allowing the buyer to control freight and insurance or to receive a door‑to‑door price. The chosen term should be confirmed in the commercial invoice.