About Shenzhen Yandiya Technology Limited - Agriculture Supplier in China

Shenzhen Yandiya Technology Limited is registered in Shenzhen, China and currently lists six active infrared heating panel products. The catalogue includes three glass‑based panels (450 W, 600 W, 900 W) and three aluminium‑based panels (500 W, 800 W, 1200 W), plus a 450 W black infrared glass heater, all falling under the agriculture category which commonly serves greenhouse and crop‑drying applications. Each product is identified by its power rating and construction material, reflecting a focused product set rather than a broad diversified line. The supplier’s trust tier is recorded as “harbor,” indicating a mid‑level verification status within the platform’s rating system.

The listed items are infrared heating panels that convert electrical energy into radiant heat. Glass panels typically feature a transparent quartz surface, while aluminium panels use a metal substrate for enhanced durability in harsh environments. The black glass heater combines a darkened glass surface with infrared emission for higher surface emissivity. These six models together cover a power range from 450 W to 1200 W, providing options for small‑scale to medium‑scale heating installations.

Product Range and Specialties of Shenzhen Yandiya Technology Limited

The catalogue comprises six infrared heating panels distinguished by wattage and material: 450 W black glass heater, 500 W aluminium panel, 600 W glass panel, 800 W aluminium panel, 900 W glass panel, and 1200 W aluminium panel. In the industry, such panels are commonly supplied in standard widths of 600 mm to 1000 mm, thickness between 3 mm and 5 mm, and operate on 220‑240 V AC with a frequency of 50/60 Hz. Typical performance specifications include surface temperatures up to 80 °C, an efficiency rating of 80‑90 % and a lifespan of 20 000‑30 000 hours. Buyers often compare panels by power density (W per cm²) and emissivity, where glass panels usually achieve emissivity of 0.93‑0.95 and aluminium panels around 0.85‑0.88. Standard compliance for these devices includes IEC 60335‑2‑30 for safety and IEC 60730 for environmental performance.

Industry practice groups infrared heating panels under HS Chapter 85, specifically heading 8516.30 for electric heating resistors and elements. Common grades are classified by power output (low‑power < 500 W, medium 500‑1000 W, high > 1000 W) and by enclosure material, which influences corrosion resistance and suitability for humid or outdoor settings. Typical certifications requested by importers are CE marking, RoHS compliance, UL listing for North America, and ISO 9001 quality‑management system certification for manufacturers.

Trade and Export Information - Shenzhen Yandiya Technology Limited

China is a leading exporter of electric infrared heating panels, with the majority of shipments classified under HS 8516.30. Major import markets include the European Union, the United Arab Emirates, Saudi Arabia, South Korea, and the United States, where panels are used in greenhouse heating, industrial drying, and space‑heating systems. Importers generally require CE conformity for EU entry, RoHS documentation for hazardous substance limits, and UL or CSA certification for North American compliance. Shipping is typically performed in 20‑foot or 40‑foot containers on wooden pallets, with each panel wrapped in anti‑static film to prevent surface damage; Incoterms most often quoted are FOB Shenzhen or CIF destination port.

Chinese manufacturers of infrared panels often operate under the China Compulsory Certification (CCC) scheme, and many have ISO 9001 or ISO 14001 systems to satisfy environmental and quality audits. Buyers should verify that the supplier can provide the required test reports, such as thermal performance curves, electrical safety test certificates, and material safety data sheets, before arranging freight.

Sourcing from Shenzhen Yandiya Technology Limited - Buyer Guidance

When sourcing infrared heating panels from Shenzhen Yandiya, request a Declaration of Conformity (DoC) that references CE, RoHS and any applicable IEC safety standards. Verify the panel’s voltage rating, wattage, dimensions and mounting hole pattern against your installation specifications, and ask for a performance test report that includes surface temperature rise at rated power. It is common to request a pre‑shipment sample of the same model to confirm emissivity, glass clarity or aluminium finish, especially for projects with strict visual or durability criteria.

Typical minimum order quantities for Chinese infrared panel exporters range from 50 to 100 units per model, with lead times of 25‑35 days after receipt of a confirmed purchase order and payment. Ensure that packaging details specify double‑wall cardboard boxes or wooden crates with moisture‑resistant liners, and confirm the container loading plan (e.g., 12 units per 20‑ft container) to avoid unexpected freight costs.

What power ratings are available from Shenzhen Yandiya Technology Limited?

The supplier lists six panels with power outputs of 450 W, 500 W, 600 W, 800 W, 900 W and 1200 W, covering low to high‑power applications.

Which materials are used for the heating panels?

Three models use a glass substrate (including a black‑coated glass heater) and three use an aluminium substrate, each designed for different durability and emissivity needs.

What standard certifications should I ask for before purchasing?

Request CE marking documentation, RoHS compliance statements, and any applicable IEC safety test reports such as IEC 60335‑2‑30. For North American shipments, UL or CSA certificates are typically required.

Is there a typical minimum order quantity (MOQ) for these panels?

Chinese infrared panel exporters usually set MOQs between 50 and 100 units per model; confirm the exact MOQ with the supplier during quotation.

What is the usual lead time from order confirmation to shipment?

Lead times are generally 25‑35 days after a purchase order and payment have been confirmed, depending on production scheduling.

How are the panels packaged for export?

Panels are commonly wrapped in anti‑static film and placed in double‑wall cardboard boxes or wooden crates, then palletised for container loading.

Which HS code is typically used for these infrared heating panels?

Infrared heating panels are generally classified under HS heading 8516.30, which covers electric heating resistors and elements.

What regions most frequently import infrared heating panels from China?

Key import regions include the European Union, the Middle East (UAE, Saudi Arabia), South Korea, and North America, where the panels are used in greenhouse, industrial drying and space‑heating applications.