About Shenzhen Kinca Medevice Co.LTD. - Medical Catheters Supplier in China

Shenzhen Kinca Medevice Co.LTD. is located in Shenzhen, China and currently lists nine active products. The catalogue focuses on catheter and tubing solutions used in interventional and diagnostic procedures. Products include Iv Catheter Tube, Introducer Sheath Set, High Pressure Braided Tube, Epidural Catheter, Urodynamic Catheter, Thin Wall Tubing, Angiographic Tubing, Twin Tubing, and Micro‑bore Catheter. Each item falls under the broader medical equipment and machinery category. The supplier is classified in the harbor trust tier.

The listed items cover a range of dimensions and functional specifications such as high‑pressure resistance, low‑profile wall thickness, and compatibility with imaging fluids. Materials commonly used for these types of devices include medical‑grade polyurethane, silicone, and PTFE, though specific material composition is not disclosed in the catalogue. The product set addresses applications in vascular access, urology, anesthesia, and radiology. All nine items are grouped under the top categories Agriculture, Medical Equipment & Machinery, and Medical Catheters as indicated in the supplier profile.

Product Range and Specialties of Shenzhen Kinca Medevice Co.LTD.

Shenzhen Kinca Medevice’s catalogue comprises nine catheter‑related products. The Iv Catheter Tube and Micro‑bore Catheter are typically sized from 2‑Fr to 8‑Fr and may be specified in lengths from 30 cm to 150 cm. Introducer Sheath Sets and High Pressure Braided Tubes are engineered for sheath insertion and high‑pressure contrast delivery, often requiring burst pressures above 200 bar. Epidural and Urodynamic Catheters are designed for spinal and urinary tract access, respectively, with lumen diameters calibrated to standard clinical ranges. Thin Wall, Angiographic, and Twin Tubings provide low‑profile channels for imaging and dual‑channel procedures, frequently supplied in sterile packaging.

In the medical tubing market, manufacturers usually grade products by material compliance (e.g., silicone grade A, polyurethane grade B) and by performance metrics such as tensile strength (≥30 MPa for braided tubes) and kink resistance. Standard dimensions are expressed in French size (Fr) and millimetres, while surface finish is often measured by roughness Ra < 0.2 µm for intravascular use. Buyers often request certificates of conformity to ISO 13485 and a Declaration of Conformity referencing the relevant EU Medical Device Regulation (MDR) or US FDA 510(k) clearance.

Trade and Export Information - Shenzhen Kinca Medevice Co.LTD.

Chinese manufacturers of catheter and tubing components frequently ship to North America, the European Union, and emerging markets in the Middle East and Southeast Asia. Exports are usually handled in 20‑ft or 40‑ft containers, with each product packed in sterilized barrier pouches or bulk trays, depending on volume. The HS chapter 90 classification for medical devices governs customs duties, and many importing countries require a certificate of origin and compliance with the destination’s regulatory framework.

Typical buyers request documentation such as ISO 13485 quality system certificates, CE marking test reports, and FDA 510(k) summaries before releasing shipments. Inspection bodies like SGS or Bureau Veritas may conduct pre‑shipment audits, especially for high‑risk categories such as epidural catheters. Incoterms commonly used include FOB Shenzhen or CIF destination port, with temperature‑controlled logistics for products sensitive to humidity.

Sourcing from Shenzhen Kinca Medevice Co.LTD. - Buyer Guidance

Prospective buyers should verify the material specification (e.g., medical‑grade silicone, PTFE) and confirm that the supplied tubing meets the required burst pressure and dimensional tolerances. Requesting a sample batch with full test reports - covering biocompatibility (ISO 10993), tensile strength, and sterility validation - helps assess conformity before larger orders. Ensure that the supplier can provide a valid ISO 13485 certificate and, where applicable, CE Declaration of Conformity or FDA 510(k) documentation.

Clarify the minimum order quantity, which for specialized catheters often starts at one full container load (approximately 500 - 800 units depending on packaging) but may be negotiated for smaller trial shipments. Lead times for custom‑size tubing typically range from 30 to 60 days after design approval. Confirm packaging details, such as sterile barrier pouch material and labeling requirements, to align with the importing country’s regulatory standards.

What types of catheters does Shenzhen Kinca Medevice offer?

The supplier lists nine items: IV catheter tube, introducer sheath set, high‑pressure braided tube, epidural catheter, urodynamic catheter, thin‑wall tubing, angiographic tubing, twin tubing, and micro‑bore catheter.

Which materials are commonly used for these products?

Medical‑grade silicone, polyurethane, and PTFE are the typical materials for catheter and tubing products, providing the biocompatibility and flexibility required for clinical use.

What certifications should a buyer request from this supplier?

Buyers should ask for ISO 13485 quality‑system certification, a CE Declaration of Conformity for EU markets, FDA 510(k) clearance or summary for US imports, and material biocompatibility reports such as ISO 10993.

How are the products typically packaged for export?

Products are usually sealed in sterile barrier pouches or bulk trays, placed in sealed cartons, and loaded into 20‑ft or 40‑ft containers, with temperature‑controlled conditions applied when required.

What HS code families apply to catheter and tubing items?

Catheter and medical tubing items are generally classified under HS Chapter 90, which covers surgical, medical and laboratory instruments.

What is the typical lead time for an order?

Standard lead times for non‑customized catheter tubing are around 30 days, while custom dimensions or special material grades may require 45 - 60 days after design approval.

What is the minimum order quantity for these products?

Minimum orders are often set at one full container load, roughly 500 - 800 units depending on product size and packaging, though smaller trial quantities can be negotiated.

Which regions commonly import these medical devices from China?

Major import destinations include the United States, European Union member states, the Middle East, and Southeast Asian countries such as Japan, Singapore and Malaysia.