About Shenzhen Goyuda Hardware Products Co., Ltd. - ATM - Automated Teller Machines Supplier in China

China, Shenzhen hosts five active product listings from Shenzhen Goyuda Hardware Products Co., Ltd. The catalogue includes chassis cabinets, frequency conversion components, an ATM machine built with a cold‑rolled steel housing and ABS plastic panels, an advertising lighting box with an aluminum alloy frame, LED light source and acrylic diffusion panel, and a range of medical equipment. Each entry is recorded under its relevant HS‑code family where provided, such as HS 8472.90 for the ATM unit and HS 9405.61 for the lighting box. The supplier is classified as an imported tier with a harbor trust level, indicating established cross‑border trade activity. The product mix spans hardware for financial services, advertising installations, and medical device housings, reflecting a diversified manufacturing capability.

The ATM machine listed under HS 8472.90 is a cold‑rolled steel housing fitted with ABS interior panels, a common construction that balances structural strength with lightweight handling. The advertising lighting box (HS 9405.61) utilizes an aluminum alloy frame, LED illumination and an acrylic diffusion panel, a typical configuration for outdoor signage. Chassis cabinets and frequency conversion components are described without HS codes but fall within standard hardware categories for industrial equipment. Medical equipment is also included, though material specifics are not detailed. All five products are positioned for export from China to markets that require hardware compliance with international safety and performance standards.

Product Range and Specialties of Shenzhen Goyuda Hardware Products Co., Ltd.

Shenzhen Goyuda’s catalogue lists chassis cabinets, frequency conversion components, an ATM machine, an advertising lighting box and medical equipment. In the hardware sector, chassis cabinets are often fabricated from cold‑rolled steel gauges ranging from 0.8 mm to 1.2 mm and may carry IP‑rated enclosures (IP54 or higher) for dust protection. Frequency conversion components typically conform to IEC 61800‑3 performance classes, with voltage ratings up to 480 V and efficiency levels above 90 %. The ATM unit follows the common construction of a steel shell with ABS interior panels, usually designed to meet IEC 60950‑1 safety standards and to accommodate PIN‑pad and card‑reader modules. Advertising lighting boxes frequently employ aluminum alloy frames (6063 or 6061 grade), LED modules with luminous flux between 2,000 lm and 5,000 lm, and acrylic diffusion panels of 3‑5 mm thickness, often rated to IP65 for outdoor use. Medical equipment housings generally require compliance with IEC 60601‑1 and may be manufactured from biocompatible plastics or stainless steel, depending on the device class.

Trade and Export Information - Shenzhen Goyuda Hardware Products Co., Ltd.

Exports of hardware such as ATMs and advertising lighting boxes from China are routinely shipped to North America, Europe and Southeast Asia, where financial institutions and advertising agencies source bulk quantities. The HS code 8472.90 covers other automatic data processing machines, a category that customs authorities often inspect for compliance with electronic safety and electromagnetic compatibility (EMC) standards, notably CE marking for the EU and FCC Part 15 for the United States. HS 9405.61 for lighting boxes falls under “metal furniture” and is subject to verification of material composition, lead‑free solder and RoHS compliance. Typical export packaging includes wooden crates or reinforced cardboard with internal cushioning, sized for 20‑ft or 40‑ft containers, and Incoterms such as CIF or FOB are commonly used. Buyers usually request test reports for mechanical strength, fire‑retardancy and electrical safety, while Chinese exporters often provide pre‑shipment inspection certificates issued by recognized agencies.

Sourcing from Shenzhen Goyuda Hardware Products Co., Ltd. - Buyer Guidance

When sourcing the ATM machine, request a detailed data sheet that lists steel gauge, ABS panel thickness, power consumption, and compliance certificates such as CE, FCC and ISO 9001. Verify that the unit meets IEC 60950‑1 safety requirements and that the LED lighting box documentation includes luminous flux, power factor, IP rating and RoHS compliance. For chassis cabinets and frequency conversion components, ask for material test reports confirming steel grade and dielectric strength, as well as any relevant IEC or UL certifications. Medical equipment should be accompanied by a declaration of conformity to IEC 60601‑1 and, if applicable, evidence of ISO 13485 quality‑management system certification. Requesting pre‑shipment inspection reports and packaging specifications helps confirm that the goods will arrive undamaged and meet regulatory entry requirements in the destination market.

What HS codes are associated with the products listed by Shenzhen Goyuda?

The ATM machine is classified under HS 8472.90, and the advertising lighting box falls under HS 9405.61. The other items (chassis cabinets, frequency conversion components and medical equipment) are listed without specific HS codes in the catalogue.

Which material standards apply to the ATM housing?

The ATM housing uses cold‑rolled steel for the outer shell and ABS plastic for interior panels. Buyers should verify steel thickness (typically 0.8 mm - 1.2 mm) and ABS grade (e.g., ABS‑PC blend) and request material test reports.

What certifications should a buyer request for the advertising lighting box?

Typical certifications include CE marking, RoHS compliance, and an IP rating (commonly IP65). Request a test report confirming luminous flux, power factor and compliance with relevant safety standards.

Are there common packaging methods for these hardware items?

Exporters usually pack chassis cabinets and lighting boxes in wooden crates or reinforced cardboard with internal cushioning. Containers are loaded in 20‑ft or 40‑ft units, and Incoterms such as CIF or FOB are standard.

What typical quality tests are applied to frequency conversion components?

Frequency converters are commonly tested for voltage rating (up to 480 V), efficiency (≥90 %), harmonic distortion and IEC 61800‑3 compliance. Test certificates should be provided before shipment.

Which regulatory documents are needed for the medical equipment listed?

Medical equipment generally requires a Declaration of Conformity to IEC 60601‑1, and if the device is a higher‑risk class, evidence of ISO 13485 certification. Buyers should also request a product safety test report.

What are the typical lead times for orders from Shenzhen Goyuda?

Lead times depend on the specific product but generally range from 30 days for standard chassis cabinets to 45‑60 days for custom‑spec ATM units or lighting boxes, subject to material availability and certification preparation.

How can a buyer verify the supplier’s trust tier?

The supplier is listed as an "imported" tier with a "harbor" trust level in the trade platform, indicating that the supplier has completed basic verification and has a history of cross‑border transactions. Buyers may request additional due‑diligence documents such as business licenses or third‑party audit reports.