About Shenzhen Fuchengtimes Co., Ltd - GSM Mobile Phone Supplier in China

Shenzhen Fuchengtimes Co., Ltd is a China-based supplier operating from Shenzhen, the city at the centre of Guangdong Province's electronics and mobile-device manufacturing cluster. The supplier lists 8 active products in its catalogue, all concentrated in the mobile phone category, spanning GSM feature phones, 3G smartphones, clamshell handsets, and senior-oriented devices. Listed model lines include the B20s, B24, B11, and B12 GSM phones, the F63 and F28 3G smartphones, the F40 GSM clamshell phone, and the B49 senior phone, giving the range a clear focus on entry-level and mid-tier handsets rather than flagship smartphones.

The product mix reflects a deliberate split between 2G GSM devices (still in demand in several emerging markets) and 3G-capable smartphones, with form factors covering bar, clamshell, and large-button senior designs. Shenzhen's Huaqiangbei and surrounding Bao'an District supply chains give local assemblers access to MediaTek and Spreadtrum chipset platforms, LCD/TFT display modules, lithium-ion battery cells, and plastic housings within a short radius, which is the typical sourcing environment for suppliers in this segment. The catalogue position is consistent with a B2B exporter serving wholesale buyers, importers, and distributors in markets where 2G/3G handsets remain commercially relevant.

Product Range and Specialties of Shenzhen Fuchengtimes Co., Ltd

The catalogue covers three distinct device families. The GSM bar-phone family (B20s, B24, B11, B12) typically ships with 2.4-inch to 2.8-inch QVGA displays, single rear cameras in the 0.3 MP to 2 MP range, MediaTek MT6261D or similar single-core platforms, removable BL-4U or BL-5C type lithium-ion batteries (typically 800 mAh to 1500 mAh), and support for 2G GSM bands 900/1800 MHz (or 850/900/1800/1900 MHz for quad-band variants). Buyers in this segment usually evaluate devices by talk-time hours (commonly 5 to 10 hours), standby time (often 200 to 400 hours), and torch/Bluetooth/FM radio feature inclusion.

The 3G smartphone line (F63, F28) is built on WCDMA/UMTS platforms such as MediaTek MT6572, MT6580, or MT6582, with 4.0-inch to 5.0-inch WVGA or FWVGA touchscreens, dual-SIM slots, 512 MB to 1 GB of RAM, 4 GB to 8 GB of internal storage, and Android 4.4 KitKat or Android 5.1 Lollipop as the typical operating system layer. The F40 clamshell phone adds a flip-form factor with an external secondary display, while the B49 senior phone targets older users with large keypad buttons, an SOS button, high-volume speaker output (often 100 dB or higher), and simplified menu navigation. Across all 8 listings, the common quality parameters buyers review include SAR values, battery cycle life, keypad actuation force, and drop-test results from 1 m onto hard surfaces.

Trade and Export Information - Shenzhen Fuchengtimes Co., Ltd

Mobile handsets exported from China fall under HS code 8517 (telephone sets, including smartphones and other mobile phones), with feature phones often classified under 8517.14 and smartphones under 8517.13 in many customs schedules. China is the world's largest exporter of mobile handsets by volume, with Shenzhen and the wider Pearl River Delta accounting for a substantial share of global production capacity, particularly for 2G/3G feature phones and entry-level Android smartphones. Typical importing regions for this product mix include Southeast Asia (Indonesia, the Philippines, Vietnam, Myanmar), South Asia (India, Bangladesh, Pakistan, Sri Lanka), Africa (Nigeria, Kenya, Ghana, Tanzania, Egypt), the Middle East (Iraq, Iran, Saudi Arabia), and parts of Latin America, where 2G networks are still active or 3G remains the dominant mobile broadband standard.

Common documentation and certification requirements in this trade lane include CE marking for the European Economic Area, FCC Part 22/24/27 compliance for the United States, RoHS and REACH declarations for restricted substances, WEEE registration for electronics recycling in the EU, a Certificate of Conformity (CoC) or pre-shipment inspection report for several African and Middle East destinations, and type-approval from national regulators such as NCC for Nigeria, KEBS for Kenya, or BIS for India. Battery cells inside the devices typically require UN 38.3 transport certification for air freight and MSDS documentation. Standard export packaging is 20-piece or 50-piece inner cartons inside master cartons of 200 to 500 units, with each handset protected by an individual bubble bag and foam insert; a 20 ft container can usually accommodate 25,000 to 40,000 finished handsets depending on carton configuration. Common Incoterms used by Shenzhen-based phone exporters are FOB Shenzhen, FOB Yantian, and CIF to the destination port, with sea freight being the dominant mode for full-container loads.

Sourcing from Shenzhen Fuchengtimes Co., Ltd - Buyer Guidance

Buyers sourcing from Shenzhen Fuchengtimes Co., Ltd should request the CE, FCC, and RoHS certificates relevant to their destination market, plus a signed specification sheet for each model listing chipset, RAM/ROM, battery capacity in mAh, supported GSM/WCDMA bands, SAR value, and the operating system version. A pre-production sample of at least 2 to 5 units per model is standard practice in this category, along with a golden sample retained by the buyer for incoming quality comparison against bulk shipments. Test reports from accredited labs covering drop, vibration, temperature/humidity, and battery cycle testing are typically requested, and buyers should confirm whether the supplier holds ISO 9001 quality management certification or can share recent third-party inspection reports (e.g., SGS, BV, or TUV).

Before placing a volume order, it is advisable to verify the supplier's business licence, export licence, and bank reference, and to confirm the HS code (8517.13 or 8517.14) and country of origin declaration that will appear on the commercial invoice and packing list. Minimum order quantities in this segment typically start at 500 to 1,000 units per model for OEM-branded orders and 100 to 300 units for ready-stock catalogue items, with production lead times of 15 to 30 days for stock models and 30 to 45 days for customised firmware, language packs, or branded housing. Buyers should also clarify warranty terms (commonly 12 months), replacement-defect ratios, and whether the supplier provides IMEI registration support for markets where IMEI blocking is enforced.

What product categories does Shenzhen Fuchengtimes Co., Ltd supply?

The supplier lists 8 active products, all within Mobile Phones and Accessories, with a focus on GSM/CDMA mobile phones. The catalogue includes GSM bar phones (B20s, B24, B11, B12), 3G smartphones (F63, F28), a GSM clamshell phone (F40), and a GSM senior phone (B49).

Which HS code applies to the mobile phones in this catalogue?

Mobile handsets exported from China are typically classified under HS code 8517 (telephone sets), with smartphones generally under 8517.13 and feature/GSM phones under 8517.14 in many customs schedules. Buyers should confirm the exact 6-digit or 10-digit national classification with their local customs broker before shipment.

What certifications should buyers request before ordering?

Buyers should request CE (EU), FCC (US), and RoHS documentation as standard, plus country-specific type-approval such as NCC, BIS, or KEBS depending on the destination. A Certificate of Conformity, MSDS for the lithium-ion battery, and UN 38.3 test summary are also commonly required for cross-border shipment.

What is the typical MOQ and lead time for orders?

For ready-stock catalogue models, MOQs commonly start at 100 to 500 units per SKU, while OEM-branded orders typically require 1,000 units or more. Production lead times range from 15 to 30 days for in-stock models and 30 to 45 days for customised firmware, language packs, or branded housings.

Which markets typically import 2G and 3G handsets from Shenzhen?

Common destination regions include Southeast Asia (Indonesia, Philippines, Vietnam), South Asia (India, Bangladesh, Pakistan), Africa (Nigeria, Kenya, Ghana, Tanzania), the Middle East (Iraq, Iran), and parts of Latin America. These markets still operate active 2G GSM networks on 900/1800 MHz bands or rely on 3G/WCDMA as the dominant mobile broadband standard.

What packaging and container loading norms apply to phone exports?

Standard export packing uses individual bubble bags and foam inserts inside inner cartons of 10 to 50 units, with master cartons of 200 to 500 handsets. A 20 ft container typically holds 25,000 to 40,000 finished handsets depending on carton configuration, and FOB Shenzhen or FOB Yantian are the most common Incoterms.

What quality parameters should buyers verify on samples?

Buyers typically evaluate talk time (5 to 10 hours), standby time (200 to 400 hours), battery capacity in mAh, supported GSM/WCDMA frequency bands, SAR value, keypad actuation, and drop-test performance from 1 metre. For smartphones, RAM, ROM, Android version, and display resolution (WVGA or FWVGA) are also standard inspection points.

How should buyers confirm the supplier's legitimacy before a first order?

It is standard practice to request the supplier's business licence, export licence, ISO 9001 certificate if held, recent third-party inspection reports (SGS, BV, or TUV), and bank reference details. A small trial order combined with a pre-shipment inspection is the most common risk-mitigation approach in this product category.