About Shenzhen Doertime M&E Equipment Co., Ltd. - Agriculture Supplier in China

Shenzhen Doertime M&E Equipment Co., Ltd. is based in Shenzhen, Guangdong Province, China and currently lists five active products. The catalogue includes pneumatic oil dispensers, a pneumatic oil pump, a hand‑operated grease pump, an air‑operated grease pump and a manual grease pump. All items fall under the broader agriculture equipment segment, where fluid handling and lubrication are essential for farm machinery maintenance. The company is classified as an imported supplier with a harbor trust tier, indicating it participates in cross‑border trade through major Chinese ports. The product set reflects a focus on portable and station‑type dispensing solutions used by agricultural service providers and equipment manufacturers.

The listed products correspond to HS‑code headings commonly applied to fluid dispensing and pump equipment, such as Chapter 84 (Machinery) and specifically headings 8424 and 8424.30 for oil‑ and fuel‑dispensing machines. These devices are typically constructed from forged steel or aluminum alloys and are designed for pressures up to 1 MPa. In the agricultural sector they support routine maintenance of tractors, harvesters and irrigation equipment, reducing downtime caused by inadequate lubrication.

Product Range and Specialties of Shenzhen Doertime M&E Equipment Co., Ltd.

The catalogue covers two functional groups: oil dispensing systems (pneumatic oil dispenser and pneumatic oil pump) and grease pumping solutions (hand‑operated, air‑operated and manual grease pumps). Oil dispensers on the market usually deliver flow rates between 0.5 L/min and 5 L/min, feature adjustable pressure regulators, and comply with ISO 4418 for pneumatic safety. Grease pumps commonly provide output from 0.1 L/min to 2 L/min, use NLGI‑grade grease (typically 2‑3), and are built to ISO 6789 standards for hand‑driven tools. Materials are typically hot‑rolled steel for pressure housings and polymer seals for chemical resistance. Buyers often look for CE marking, ISO 9001 quality management certification, and performance test reports that verify flow accuracy and maximum pressure tolerance.

Industry practice for these categories includes offering interchangeable nozzle kits, pressure gauges calibrated to 0.1 MPa, and optional stainless‑steel internal components for high‑corrosion environments. Export‑ready units are usually packed in wooden crates with internal dividers to prevent movement, and sized to fit standard 20‑ft or 40‑ft containers for efficient freight handling.

Trade and Export Information - Shenzhen Doertime M&E Equipment Co., Ltd.

China ranks among the top global exporters of pneumatic and hydraulic equipment, with the majority of shipments destined for Southeast Asian agricultural markets, the European Union, and North America. HS‑code 8424.30 (oil and fuel dispensing machines) and 8424.90 (other machinery for fluid handling) are routinely inspected under the China Inspection and Quarantine (CIQ) system, and buyers often request the corresponding Export Inspection Certificate. Common buyer requirements include CE conformity, ISO 9001 or ISO 14001 compliance, and a Declaration of Conformity that references EU directives for machinery safety (Machinery Directive 2006/42/EC).

Typical logistics involve FOB Shenzhen port or CIF terms to the buyer’s destination port, with cargo loaded in wooden crates or bulk‑packed steel drums for larger pump units. Container loading efficiencies reach 12‑14 units per 20‑ft container depending on packaging dimensions. Export documentation generally comprises the commercial invoice, packing list, bill of lading, and any required phytosanitary or customs certificates for agricultural machinery.

Sourcing from Shenzhen Doertime M&E Equipment Co., Ltd. - Buyer Guidance

When sourcing from Shenzhen Doertime, buyers should request a CE Declaration of Conformity and the latest ISO 9001 audit report to confirm the supplier’s quality management system. Performance data such as flow‑rate curves, maximum pressure tests, and NLGI grease compatibility charts are standard documents that help verify product suitability for specific agricultural machinery. Samples of the pneumatic oil dispenser or grease pump can be ordered to assess build quality, seal integrity and ergonomics before committing to larger orders.

Typical minimum order quantities for these types of equipment range from a single unit (for sample testing) to batches of 10‑20 units for production runs, with lead times of 4‑6 weeks after order confirmation. Verify packaging details - wooden crates with individual cushioning - and request a pre‑shipment inspection report if the shipment exceeds $50 000 or is destined for markets with strict import controls.

What product categories does Shenzhen Doertime M&E Equipment Co., Ltd. list?

The company lists five active products: pneumatic oil dispensers, a pneumatic oil pump, a hand‑operated grease pump, an air‑operated grease pump and a manual grease pump, all classified under agricultural equipment.

Which HS codes are applicable to the listed products?

The oil dispensers and pumps fall under HS heading 8424, specifically 8424.30 for oil‑ and fuel‑dispensing machines, while the grease pumps are generally covered by HS 8424.90 for other fluid‑handling machinery.

What certifications are commonly required for these types of pumps and dispensers?

Buyers typically require CE marking, ISO 9001 quality‑management certification, and sometimes ISO 14001 for environmental management. Test reports confirming flow rate, pressure limits and material compliance are also standard.

What are the typical packaging and shipping methods for these items?

Units are usually packed in wooden crates with internal dividers to protect moving parts, and loaded into standard 20‑ft or 40‑ft containers. FOB Shenzhen or CIF to the buyer’s port are the most common Incoterms.

What documentation should a buyer request before placing an order?

Request the CE Declaration of Conformity, the latest ISO 9001 audit report, detailed product data sheets (flow‑rate, pressure, NLGI grade), and a pre‑shipment inspection certificate.

What are the usual lead times and minimum order quantities?

Lead times are typically 4‑6 weeks after order confirmation. Minimum order quantities range from one unit for sampling to 10‑20 units for bulk orders, depending on the model.

Which regions import these kinds of agricultural fluid‑handling equipment?

Major importers include Southeast Asian countries, the European Union, and North America, where the equipment is used for tractor, harvester and irrigation system maintenance.

Are there any specific regulatory checks for these products when exporting from China?

Exports are subject to CIQ inspection, and buyers often require an Export Inspection Certificate that confirms compliance with the relevant HS codes and safety standards.