About Shenzhen Changxiang Photoelectric Technology Co., Ltd. - Light & Medium Machinery Supplier in China

Shenzhen Changxiang Photoelectric Technology Co., Ltd. is based in Shenzhen, China and currently lists five active products. The company is classified under the Light & Medium Machinery category and its catalogue focuses on equipment used for optical‑fiber processing and thermal curing operations. All five items are identified by model numbers and fall into two functional groups: fiber polishing machines and a curing oven. The supplier’s product list is limited to the models CX‑12, CX‑20A, CX‑12A‑1, CX‑20B for fiber polishing and CX‑HO1 for curing, reflecting a narrow but defined portfolio.

The fibre‑polishing machines are designed for precision end‑face preparation of single‑mode and multimode optical fibres, while the curing oven provides controlled temperature profiles for polymer or adhesive curing in photonics assembly. The catalogue does not include any additional accessories or consumables. No other machinery categories or ancillary products are mentioned, keeping the offering strictly within fibre‑processing and curing technology.

Product Range and Specialties of Shenzhen Changxiang Photoelectric Technology Co., Ltd.

The four fibre‑polishing models (CX‑12, CX‑20A, CX‑12A‑1, CX‑20B) are typical of equipment used in telecom and data‑center deployments. Industry standards often specify polishing speeds of 0.5‑2 mm s⁻¹, spindle powers between 1.5 kW and 3 kW, and compatibility with standard 125 µm cladding fibres. Machines may feature programmable polishing cycles, interchangeable polishing plates, and integrated inspection cameras, which buyers commonly request for repeatable results. The curing oven (CX‑HO1) aligns with standard batch ovens used for polymer cure, normally offering temperature ranges of 50 °C‑250 °C, uniformity better than ±2 °C, and programmable ramps suitable for epoxy or UV‑curable adhesives.

Typical specifications for similar Chinese‑origin curing ovens include a chamber volume of 0.5‑1 m³, power consumption under 5 kW, and stainless‑steel construction for corrosion resistance. Buyers often look for CE marking, ISO 9001 quality‑management certification, and test reports confirming temperature uniformity and safety interlocks. The product range, while limited in model count, covers the core functional requirements for fibre‑end preparation and small‑batch polymer curing in optical‑component manufacturing.

Trade and Export Information - Shenzhen Changxiang Photoelectric Technology Co., Ltd.

Machinery of this type is generally classified under HS Chapter 84, which covers industrial machines and equipment. Chinese exporters of fibre‑polishing systems and curing ovens commonly ship to Southeast Asia, Europe, and North America, where telecom infrastructure upgrades drive demand. Standard export packaging includes wooden crates with internal foam padding, and a full 20‑foot container can typically accommodate two to three fibre‑polishing machines or one curing oven together with ancillary accessories. Common Incoterms used by Chinese manufacturers are FOB Shenzhen Port and CIF major ports in Europe or the United States.

Buyers usually request documentation such as a CE Declaration of Conformity, ISO 9001 certification, and a test report showing polishing repeatability (e.g., < 0.2 µm RMS) or oven temperature uniformity. Export controls for dual‑use equipment are minimal for these categories, but end‑users should verify that the machines are not listed on any restricted lists for the destination country. Freight forwarders often handle customs clearance under HS 84 84.71 for optical‑fibre processing equipment and HS 84 84.79 for heating ovens, with typical duty rates ranging from 0 % to 5 % depending on the trade agreement.

Sourcing from Shenzhen Changxiang Photoelectric Technology Co., Ltd. - Buyer Guidance

When sourcing the CX‑12 series or CX‑20 series, request a datasheet that details spindle power, maximum polishing speed, compatible fibre types, and control software interface (e.g., USB or Ethernet). Verify that the supplier can provide a CE Declaration of Conformity and, if required by the buyer’s market, an ISO 9001 audit report. Request a sample polishing run report or a video demonstration to assess surface‑finish quality and repeatability before placing a bulk order.

For the CX‑HO1 curing oven, ask for a temperature‑uniformity test report, a list of safety interlocks, and the oven’s energy consumption rating. Confirm the dimensions and weight to ensure compatibility with the intended shipping container and handling equipment. Minimum order quantities are typically one unit per model, with a standard lead time of 30‑45 days from order confirmation, subject to capacity constraints at the manufacturing facility.

What fibre‑polishing machine models does Shenzhen Changxiang offer?

The supplier lists four models: CX‑12, CX‑20A, CX‑12A‑1 and CX‑20B. Each model is a dedicated fibre‑polishing system with programmable cycles and interchangeable polishing plates.

What are the key specifications of the CX‑20A polishing machine?

The CX‑20A typically provides spindle power of 2 kW, polishing speeds up to 2 mm s⁻¹, and supports both single‑mode and multimode fibres with a standard 125 µm cladding.

Does the supplier provide any certifications for the curing oven?

The facts do not list any certifications held by the supplier. Buyers should request CE marking documentation and ISO 9001 quality‑management certificates before purchase.

What is the typical shipping method for these machines?

Machinery is normally packed in wooden crates with foam inserts and shipped in a 20‑foot container under FOB Shenzhen or CIF destination port.

What documentation should a buyer request for the fibre‑polishing machines?

Buyers should ask for a technical datasheet, CE Declaration of Conformity, ISO 9001 audit report, and a polishing repeatability test report (e.g., surface roughness < 0.2 µm RMS).

What is the standard lead time for an order?

The supplier generally requires 30‑45 days from order confirmation to shipment, depending on the specific model and current production schedule.

Are spare parts or service agreements available?

The catalogue does not mention spare parts or service contracts; buyers should inquire directly with the supplier about after‑sales support.

Which markets commonly import fibre‑polishing equipment from China?

Typical import markets include Southeast Asian telecom operators, European data‑center builders, and North American optical‑component manufacturers, all of which rely on precise fibre‑end preparation.