About Shenzhen Beien Communication Technology Co. Ltd. - Earphones/Headphone Supplier in China

China, primarily operating out of Shenzhen, lists 27 active products in its catalogue. The items fall under the top categories of Earphones/Headphone and Telephone & Accessories and are recorded with HS code families 8518.30 for most business call‑center headsets and 8518.30.10 for a specific telephone headset model. The catalogue includes wired USB and RJ headsets, Bluetooth wireless units, and noise‑cancelling variants designed for office and call‑center environments. Each product entry specifies its material composition, such as ABS plastic housings, steel‑reinforced headbands, PU leather or silicone ear cushions, and copper wiring or electronic component assemblies.

The material details show a consistent use of ABS plastic for the shell, reinforced with steel or metal alloy frames, and a variety of cushioning materials including PU leather, memory foam, and silicone. Several models incorporate additional features such as USB connectivity (FC22, FC21, CS12), Bluetooth capability (Bt201), and noise‑cancelling technology (CS12 PA). The catalogue also references specific componentry like copper voice coils, neodymium magnet drivers, and electronic circuit board assemblies, reflecting typical construction of professional communication headsets.

Product Range and Specialties of Shenzhen Beien Communication Technology Co. Ltd.

The product range consists of business‑oriented call‑center headsets (FC22, FC21, CS11, CS12, A16, A26), telephone‑style headsets, and wireless Bluetooth models (Bt201). All items are classified under HS code 8518.30 except the CS12 telephone headset which uses 8518.30.10. Materials reported include ABS plastic housings, steel‑reinforced or metal alloy headbands, PU‑leather, silicone or memory‑foam ear cushions, copper wiring, and electronic component assemblies. Typical industry specifications for such headsets follow IEC 60268‑7, with frequency response around 100 Hz - 5 kHz, impedance near 32 Ω, SPL up to 110 dB, and microphone sensitivity of - 45 dBV/Pa. Buyers also encounter variants with USB 2.0, RJ‑45, or Bluetooth 5.0 interfaces, and noise‑reduction ratings (NRR) of 20 - 25 dB for the noise‑cancelling models.

In the broader market, call‑center headsets are offered in grades ranging from entry‑level (IC US 1) to professional (IC US 3) with features such as inline controls, detachable cables, and multi‑device pairing. Common packaging is individual anti‑static polybags within cartons of 50 units, allowing a 20‑ft container to hold roughly 2,000 units.

Trade and Export Information - Shenzhen Beien Communication Technology Co. Ltd.

China remains a leading exporter of electronic communication equipment, and Shenzhen’s manufacturing ecosystem provides high‑volume production of audio headsets under HS chapter 85. The HS code 8518.30 covers headsets and earphones, while 8518.30.10 addresses telephone headsets, both subject to customs duties that vary by destination. Primary import markets for Chinese call‑center headsets include the United States, the European Union, Southeast Asia, and the Middle East, where buyers typically require CE marking for EU shipments, FCC Part 15 compliance for the U.S., and RoHS conformity for lead‑free electronics. Export logistics commonly use FOB Shenzhen or CIF major ports, with sea freight in 20‑ft or 40‑ft containers; container loading rates are about 1,800 - 2,200 headset units per 20‑ft box depending on packaging. Buyers often request test reports confirming compliance with electromagnetic compatibility (EMC), safety standards (IEC 60950‑1), and acoustic performance (IEC 60268‑7). Documentation such as a commercial invoice, packing list, and certificate of origin are standard for customs clearance. The supplier’s target markets are not listed in the facts, so sourcing parties should verify the buyer’s regional requirements before shipment.

Sourcing from Shenzhen Beien Communication Technology Co. Ltd. - Buyer Guidance

When sourcing from Shenzhen Beien, buyers should request the full technical data sheet for each headset model, confirming frequency response, impedance, SPL, microphone sensitivity, and connector type (USB, RJ‑45, Bluetooth). Test reports for EMC, safety (IEC 60950‑1), and RoHS compliance should be obtained to satisfy most import regulations. Verify that the supplier can provide CE or FCC certification copies if the shipment is destined for the EU or the United States. Before placing an order, confirm the minimum order quantity, which for comparable Chinese headset manufacturers typically starts at 500 units per model, and negotiate lead times that usually range from 30 to 45 days after order confirmation. Ask for a pre‑production sample to evaluate build quality, material finish (ABS housing, steel headband, ear cushion type), and audio performance. Clarify packaging details - individual anti‑static bags, carton size, and container loading plan - to ensure smooth logistics and customs handling.

What headset models does Shenzhen Beien list for call‑center use?

The catalogue includes 27 models such as FC22, FC21, CS11, CS12, A16, A26, BT201, BT202 and the wireless Bt201 series, each classified under HS code 8518.30 with variations in USB, RJ, or Bluetooth connectivity.

Which HS codes apply to the listed products?

Most wired and Bluetooth business headsets use HS code 8518.30, while the CS12 telephone headset is recorded under HS code 8518.30.10, covering audio equipment for telecommunication.

What materials are commonly used in these headsets?

The products feature ABS plastic housings, steel‑reinforced or metal‑alloy headbands, PU‑leather, silicone or memory‑foam ear cushions, and copper wiring or neodymium magnet drivers for the audio transducers.

Which certifications should a buyer request?

Buyers should obtain CE marking for EU shipments, FCC Part 15 compliance for the United States, and RoHS conformity for lead‑free electronics; these are standard for electronic communication devices.

What are typical technical specifications for these headsets?

Standard specifications include a frequency response of 100 Hz - 5 kHz, impedance around 32 Ω, sound pressure level up to 110 dB, microphone sensitivity of - 45 dBV/Pa, and USB 2.0 or 3.0 interfaces where applicable.

What is the usual minimum order quantity and lead time?

Suppliers of similar Chinese headset lines typically require an MOQ of 500 units per model, with a production lead time of 30 - 45 days after purchase‑order confirmation.

How are the products packaged for export?

Units are usually packed in individual anti‑static polybags, placed in cartons of 50 units, and loaded into 20‑ft or 40‑ft containers; FOB Shenzhen or CIF destination ports are the common trade terms.