About Shanghai Shuoxiang Plastic Co., Ltd - Plastic Items Supplier in China

Shanghai, China, home to Shanghai Shuoxiang Plastic Co., Ltd, currently lists five active products in its catalogue. The company’s portfolio covers items classified under Plastic Items, Light & Medium Machinery, and Blocks, Tiles & Slabs. Its product list includes water soluble film, hot melt adhesive film, embroidery trick film, a glue film peeling machine, and a blue toilet block that is recorded under HS code 3925.90 as a PVA composite. The catalogue reflects a focus on thin polymer films and a single PVA‑based sanitation product. Each entry aligns with the respective HS chapter for plastics and composite articles.

The water soluble film and hot melt adhesive film are both thin polymer sheets used in packaging and bonding applications, while the embroidery trick film serves as a release layer in textile embellishment. The glue film peeling machine is listed under the Light & Medium Machinery category and is intended for automated separation of adhesive films. The blue toilet block, identified with HS 3925.90, is a composite block designed for sanitation purposes. No additional HS codes are provided for the other four items. The supplier’s catalogue does not disclose production capacity or certifications.

Product Range and Specialties of Shanghai Shuoxiang Plastic Co., Ltd

The catalogue’s plastic film offerings comprise water soluble film, hot melt adhesive film and embroidery trick film. In the broader plastics market, water‑soluble films are typically supplied in thicknesses from 10 µm to 100 µm, with dissolution rates measured in g min⁻¹ and often comply with ISO 9001 quality management and REACH chemical safety. Hot melt adhesive films usually have melt points between 150 °C and 200 °C, tensile strength of 20 - 30 MPa, and are evaluated against ASTM D882 for tensile properties. Embroidery trick films are commonly polyester or nylon bases coated with a release agent, with surface roughness specifications around 1 - 2 µm.

The glue film peeling machine falls under Light & Medium Machinery and is typically rated for processing widths of 0.5 m to 2 m, motor power between 0.5 kW and 2 kW, and may include safety standards such as CE marking for machinery. The blue toilet block is a PVA composite, a material class that often meets ISO 9001 and may be subject to sanitary standards such as ISO 11737 for microbiological safety when intended for hygiene use. Standard packaging for such blocks includes bulk cartons of 20 kg each, and the product is commonly shipped in 20‑ft containers with HS chapter 39 coverage.

Trade and Export Information - Shanghai Shuoxiang Plastic Co., Ltd

Chinese exporters of polymer films and composite sanitation blocks frequently serve markets in Southeast Asia, the Middle East, and Europe, where demand for water‑soluble packaging and hygiene products remains strong. The HS code 3925.90 for the blue toilet block places it within Chapter 39, which is subject to customs documentation of material composition, and often requires compliance with REACH registration for polyvinyl acetate derivatives. Buyers of water‑soluble films usually request certificates of analysis confirming dissolution time and absence of heavy metals, while hot melt adhesive films are commonly inspected for melt viscosity and fire‑retardant classification under IEC 60950.

Standard export logistics from China involve loading polymer films on pallets with moisture‑proof wrapping, and shipping in 40‑ft containers to minimize handling. Incoterms such as FOB Shanghai or CIF destination are typical, with freight forwarders handling customs clearance. Exporters often provide a Certificate of Origin, a Material Safety Data Sheet (MSDS), and, where applicable, a CE Declaration of Conformity for machinery; buyers should verify that any required third‑party laboratory test reports accompany the shipment.

Sourcing from Shanghai Shuoxiang Plastic Co., Ltd - Buyer Guidance

When sourcing water‑soluble or hot melt adhesive films from Shanghai Shuoxiang Plastic, buyers should request sample sheets that specify thickness, dissolution rate (g min⁻¹) and melt viscosity (Pa·s). Test reports should reference ASTM D882 for tensile strength and ISO 9001 audit records for production consistency. For the embroidery trick film, a sample of the release surface and a report on surface roughness (µm) help confirm suitability for textile applications.

For the glue film peeling machine, buyers need the equipment’s technical datasheet, including processing width, motor power, CE safety certification, and a wiring diagram. The blue toilet block should be accompanied by a material composition certificate, an MSDS, and, if intended for public hygiene, a microbiological safety test report per ISO 11737. Verifying that the supplier can provide these documents before order placement reduces risk of non‑conformity at customs.

What product categories does Shanghai Shuoxiang Plastic list in its catalogue?

The catalogue includes water soluble film, hot melt adhesive film, embroidery trick film, a glue film peeling machine, and a blue toilet block classified under HS 3925.90 as a PVA composite. These items span the Plastic Items, Light & Medium Machinery, and Blocks, Tiles & Slabs categories.

Which HS code applies to any of the listed products?

The blue toilet block is recorded under HS code 3925.90, which falls within Chapter 39 for plastic articles. No other HS codes are provided for the remaining four products.

What typical specifications should a buyer check for water soluble film?

Buyers usually verify film thickness (10 - 100 µm), dissolution rate (g min⁻¹), and compliance with REACH and ISO 9001 quality standards. Additional checks may include moisture content and tensile strength according to ASTM D882.

What documentation is commonly required for the glue film peeling machine?

Standard documentation includes a technical datasheet with processing width and motor power, a CE conformity declaration, and an ISO 9001 audit summary. A wiring diagram and safety manual are also typical requests.

Which certifications are typically expected for the blue toilet block?

Buyers often request a Material Safety Data Sheet, a REACH registration for the PVA component, and a microbiological safety test report per ISO 11737. A Certificate of Origin may also be required for customs clearance.

What packaging and container size are typical for shipping the listed products?

Polymer films are usually packed on moisture‑proof pallets and loaded into 20‑ft or 40‑ft containers. The blue toilet block is commonly shipped in bulk cartons of 20 kg each, also placed in standard containers.

What Incoterms are frequently used for Chinese exporters of these plastic items?

FOB Shanghai and CIF to the buyer’s destination port are common terms for polymer film and composite block shipments. The choice depends on the buyer’s preference for freight responsibility and insurance.

How can a buyer verify product quality before placing a large order?

Requesting pre‑shipment sample units with accompanying test reports (e.g., dissolution time for water‑soluble film or tensile strength for adhesive film) allows verification against specifications. Additionally, confirming that the supplier can provide up‑to‑date ISO 9001 audit certificates and any required REACH or CE documents helps ensure compliance.