About Shanghai King Special Alloy Co., Ltd. - Agriculture Supplier in China

Shanghai, China is the location of Shanghai King Special Alloy Co., Ltd., which currently lists five active products in its catalogue. The supplier’s catalogue is grouped under the broad Agriculture category, although the specific items are nickel‑based alloys used in industrial applications. The product list includes Monel, Incoloy, Inconel X750, Incoloy 925 and a generic Inconel entry. Each of these items falls within the nickel‑copper or nickel‑chromium alloy families that are commonly classified under HS chapter 7207 for alloy products. The supplier is identified as an imported tier with a harbor trust rating, indicating that it operates through established Chinese export channels.

The five catalogue entries represent a focused selection of high‑performance alloys rather than a broad commodity range. Monel and the Incoloy series are copper‑nickel and nickel‑iron alloys respectively, while Inconel products are nickel‑chromium super‑alloys. These alloys are typically supplied in forms such as bars, plates, sheets or forged components, and are identified by standard alloy designations rather than proprietary grades. The supplier’s inclusion of these specific alloys suggests capability to source or manufacture to international alloy specifications.

Product Range and Specialties of Shanghai King Special Alloy Co., Ltd.

Shanghai King Special Alloy Co., Ltd.’s catalogue lists Monel, Incoloy, Incoloy 925, Inconel X750 and a general Inconel product. In the alloy market Monel is most often supplied as Monel 400, a copper‑nickel alloy with typical tensile strength around 550 MPa and corrosion resistance in seawater. Incoloy grades such as 825 and 825‑H are common for chemical processing, offering nickel‑iron‑chromium composition with typical hardness of 180 - 210 HB. Inconel X750 and other Inconel alloys (e.g., 625, 718) are nickel‑chromium‑molybdenum super‑alloys, frequently meeting ASTM B443 or ASTM B637 specifications and delivering tensile strengths above 700 MPa at elevated temperatures. Buyers usually request material test reports that reference ASTM, ISO 9001‑based quality systems and specify dimensions in millimetres or kilograms per standard shipping unit. The supplier’s product count of five indicates a targeted portfolio rather than a full line of alloy variations.

Trade and Export Information - Shanghai King Special Alloy Co., Ltd.

China is a major exporter of nickel‑based alloys, with Shanghai serving as a primary shipping hub for containerised metal products. Typical importers of Monel, Incoloy and Inconel include aerospace manufacturers in North America, chemical plant builders in Europe, and power‑generation firms in the Middle East. HS code 7207.30 covers nickel‑copper alloys such as Monel, while 7207.90 is used for other nickel‑based alloys like Incoloy and Inconel. Buyers frequently require ISO 9001 certification, mill test reports (MTR) complying with ASTM B466, B443 or EN 10217, and compliance with REACH for hazardous substances. Export shipments are commonly packed on wooden pallets, shrink‑wrapped, and loaded into 20‑ft or 40‑ft containers; Incoterms such as FOB Shanghai or CIF Shanghai are standard for these high‑value metal goods. The supplier’s harbor trust tier suggests familiarity with Chinese customs procedures and the ability to provide the necessary export documentation, such as commercial invoices, packing lists and certificate of origin.

Sourcing from Shanghai King Special Alloy Co., Ltd. - Buyer Guidance

When sourcing nickel‑based alloys from Shanghai King Special Alloy Co., Ltd., buyers should request a current Mill Test Report that lists chemical composition, mechanical properties and heat‑treatment condition according to the relevant ASTM standard. Verification of ISO 9001 or ISO 14001 certification is advisable, as these systems are commonly required for alloys used in critical applications. Buyers are also encouraged to obtain a sample batch for laboratory analysis, especially to confirm grade designation (e.g., Monel 400, Incoloy 825, Inconel X750) before placing a full order. Packaging specifications - such as bar length, cross‑section, moisture content and protective wrapping - should be confirmed to avoid damage during sea freight.

What alloy grades are available from Shanghai King Special Alloy Co., Ltd.?

The catalogue lists Monel, Incoloy, Incoloy 925, Inconel X750 and a generic Inconel product. Typical grades associated with these names include Monel 400, Incoloy 825/825‑H, Inconel X750 and other Inconel super‑alloys that meet ASTM specifications.

Which HS codes apply to the listed alloys?

Nickel‑copper alloys such as Monel fall under HS 7207.30, while broader nickel‑based alloys like Incoloy and Inconel are classified under HS 7207.90. The supplier’s products are therefore covered by the 7207 chapter for alloy products.

What certifications should a buyer request for these alloys?

Buyers should request the supplier’s ISO 9001 quality‑management certificate and a Mill Test Report referencing the appropriate ASTM standard (e.g., ASTM B466 for Monel, ASTM B443 for Inconel). Additional certifications such as REACH compliance may be required for European customers.

Are samples available before a full order?

Yes, the supplier can provide sample pieces for laboratory verification. Samples are typically shipped in small‑batch packaging and should be requested together with the expected grade and dimensions.

What are the typical packaging and container sizes for these products?

Alloys are usually bundled, shrink‑wrapped and loaded on wooden pallets. Standard shipping uses 20‑ft or 40‑ft containers, with each container holding several metric tonnes depending on product form.

What Incoterms are commonly used for shipments from this supplier?

Common Incoterms include FOB Shanghai, where the buyer assumes responsibility after the goods are loaded onto the vessel, and CIF Shanghai, which includes freight and insurance to the destination port.

What lead times are typical for ordering these alloys?

Lead times depend on product form and quantity but generally range from 2 weeks for standard grades to 4 - 6 weeks for heat‑treated or custom‑specification alloys.