About Shanghai Aipu Environmental Protection Technology Co., Ltd. - Agriculture Supplier in China

Shanghai Aipu Environmental Protection Technology Co., Ltd. is based in China and lists five active products in its catalogue. All items fall under the agriculture segment and are roof‑mounted ventilation solutions, including a natural power turbine vent roof, a 500 mm non‑power turbine fan ventilator, a 100 mm non‑power roof turbine ventilator, a 10‑inch fresh‑air turbine ventilator, and a 20‑inch natural‑power roof air ventilator. The products are described using generic turbine‑ventilator terminology without any power source for the 500 mm and 100 mm models, while the 10‑inch and 20‑inch units rely on wind‑driven natural power. The catalogue does not provide HS codes, so the items are grouped by their functional category rather than tariff classification.

The supplier’s listing focuses on passive and wind‑driven ventilation equipment commonly used in agricultural buildings such as barns, grain storage, and livestock facilities. Each model specifies its nominal opening size - 10 inch, 20 inch, 100 mm, 500 mm - which determines the potential airflow volume. No additional product variations or certifications are mentioned in the supplied data, and the supplier is classified with a harbor trust tier indicating a basic level of verification.

Product Range and Specialties of Shanghai Aipu Environmental Protection Technology Co., Ltd.

The five products comprise two natural‑power roof ventilators (10 inch and 20 inch) and three non‑powered turbine fans (500 mm, 100 mm, and a roof vent). All are designed for installation on agricultural structures to provide continuous fresh‑air exchange without electrical input. The catalogue lists only the product names; material, coating, and performance figures are not supplied.

In the ventilator market, roof‑mounted turbine units are typically fabricated from galvanized steel or aluminum alloy to resist corrosion. Common performance metrics include airflow rates measured in cubic meters per hour (m³/h), wind‑speed activation thresholds (often 2 - 3 m/s), and a blade pitch that maximizes suction. Buyers usually request specifications such as blade length, material thickness (e.g., 0.8 mm gauge), and compliance with standards like ASHRAE 62.1 for ventilation or IEC 60335 for safety of non‑electrical appliances.

Trade and Export Information - Shanghai Aipu Environmental Protection Technology Co., Ltd.

China is a major exporter of passive ventilation equipment, and products like turbine roof ventilators are usually classified under HS Chapter 84 (HS code 8414 for fans, ventilating or recycling machines). Export shipments frequently target regions with extensive agricultural construction activity, including Southeast Asia, the Middle East, Africa, and parts of Eastern Europe. Buyers in these markets often require CE marking, ISO 9001 quality‑management certification, and, where applicable, UL or IEC type approvals to satisfy local building codes.

Logistics for roof ventilators typically involve palletizing the units in wooden crates or bulk cartons and loading them in 20‑foot or 40‑foot containers. Common Incoterms used by Chinese suppliers are FOB Shanghai or CIF destination port, allowing the buyer to arrange inland transport. Customs documentation generally includes a commercial invoice, packing list, certificate of origin, and any requested test reports for material conformity.

Sourcing from Shanghai Aipu Environmental Protection Technology Co., Ltd. - Buyer Guidance

When sourcing these turbine ventilators, buyers should request detailed product drawings that show blade geometry, mounting brackets, and material thickness. Test reports for corrosion resistance (e.g., salt‑spray test) and airflow performance (CFM at specified wind speeds) help verify that the units meet agricultural ventilation standards. It is advisable to confirm the presence of CE or ISO 9001 certificates and to obtain a sample for on‑site fit‑check before placing a bulk order.

Typical minimum order quantities for roof‑mounted ventilators range from 50 to 200 units, with lead times of 30‑45 days after order confirmation and receipt of required documentation. Buyers should also verify packaging details - such as double‑wall cardboard or wooden crates - to ensure protection during sea freight, and request a pre‑shipment inspection report if required by the importing country’s customs authority.

What types of ventilation products does Shanghai Aipu list?

The catalogue includes five turbine‑type ventilators: a natural‑power roof vent, a 20‑inch natural‑power roof air ventilator, a 10‑inch fresh‑air turbine ventilator, a 500 mm non‑power turbine fan ventilator, and a 100 mm non‑power roof turbine ventilator.

Are the ventilators electrically powered?

No. The 500 mm and 100 mm models are described as non‑power turbine fans, and the 10‑inch and 20‑inch units rely on natural wind power rather than electricity.

Which HS code is typically applied to these products?

Roof‑mounted turbine ventilators are generally classified under HS Chapter 84, code 8414, which covers fans, ventilating or recycling machines.

What certifications should a buyer request?

Buyers commonly request CE marking, ISO 9001 quality‑management certification, and material test reports such as corrosion‑resistance or galvanization thickness, depending on the destination market.

What are the usual packaging and shipping methods?

Units are usually packed in wooden crates or reinforced cardboard pallets and shipped in 20‑ft or 40‑ft containers, with FOB Shanghai or CIF as standard Incoterms.

What is a typical lead time and MOQ for these ventilators?

Lead times are generally 30‑45 days after order confirmation, and minimum order quantities often start at 50 units, varying by model size and buyer requirements.

How can a buyer verify product performance before a full order?

Request a technical data sheet showing airflow (CFM) at standard wind speeds, material thickness, and a sample unit for on‑site fit testing. A third‑party pre‑shipment inspection report can also be arranged.

Which markets commonly import turbine roof ventilators from China?

Key import regions include Southeast Asian countries, the Middle East, African nations, and Eastern European markets, where agricultural construction drives demand for passive ventilation solutions.