About Shandong Wan Steel Import And Export Co., Ltd. - Steel Pipes Supplier in China

China‑based Shandong Wan Steel Import And Export Co., Ltd. lists six distinct steel pipe and tube products in its catalogue. All items fall under the HS‑4 chapters 7304 (iron or steel pipes and tubes) and 7306 (other structures of iron or steel), reflecting the standard tariff treatment for carbon steel pipework. The supplier’s top categories are identified as Steel Pipes and Steel Tubes, matching the six entries that include seamless carbon steel pipe, galvanised hollow sections, and API‑5L grade pipe. Each product entry specifies the material composition, such as carbon steel (SMLS) or zinc‑coated carbon steel, and provides an HS code that aligns with the relevant customs classification. The catalogue therefore covers a concise but technically diverse set of pipe products suitable for construction, infrastructure, and oil‑and‑gas applications.

The listed products comprise three entries under HS code 7304.19 for seamless carbon steel pipe, one entry under 7304.31 for a BSI‑standard tube, one entry under 7306.61 for galvanised hollow sections, and an API‑5L pipe also classified under 7304.19. Materials range from generic carbon steel SMLS to API‑5L grades X42, X52, X60, X65 and X80, indicating suitability for pressure‑rated pipelines. The inclusion of SGs standard and BSI standard references points to compliance with international pipe dimension and tolerance standards. No additional product families such as welded pipe or alloy steel are presented, keeping the focus on seamless carbon steel variants.

Product Range and Specialties of Shandong Wan Steel Import And Export Co., Ltd.

The catalogue offers seamless carbon steel pipes and tubes that conform to SGs, BSI and API‑5L specifications. Typical industry grades for such pipes include API 5L X42 - X80, with wall thickness and diameter defined by standards such as ASTM A53, A106 or EN 10210, and tolerances usually within ±0.5 % of nominal size. Galvanised hollow sections are commonly supplied to ASTM A123 or ISO 1461 coating standards, with zinc coating thickness measured in microns (e.g., 55 µm for hot‑dip galvanised). Buyers usually request mill test reports (MTR) that list chemical composition, tensile strength (e.g., 390 - 530 MPa for carbon steel) and dimensional inspection results. The product range therefore spans pressure‑rating pipe grades, structural hollow sections, and coated variants that meet widely recognised mechanical and corrosion‑resistance criteria.

Industry practice distinguishes seamless pipe grades by pressure class, welding method and coating. For API‑5L pipe, typical requirements include hydrostatic testing at 1.5 times the design pressure and certification to API 5L‑2. Galvanised sections often require certification to ISO 1461 for coating adhesion and corrosion resistance. These standards help buyers match product performance to applications such as oil‑and‑gas transmission, water distribution or building frameworks.

Trade and Export Information - Shandong Wan Steel Import And Export Co., Ltd.

China is among the world’s largest exporters of carbon steel pipe, with major shipment volumes to the Middle East, Southeast Asia, Europe and the Americas. HS chapter 7304 products are frequently inspected under the Shanghai Customs inspection regime, and many importers request pre‑shipment inspection certificates (PSIC) to satisfy buyer‑country customs. Typical Incoterms used by Chinese pipe exporters include FOB Shanghai, FOB Qingdao or CIF for destination ports, with loading in 20‑ft or 40‑ft containers or bulk shipments on roll‑on/roll‑off vessels for larger quantities. Buyers often require compliance with ISO 9001 quality management systems and, for oil‑and‑gas pipelines, API 5L certification; however, such certificates are not listed in the supplier’s facts and should be verified with the exporter.

Export logistics for the listed HS codes involve palletised bundles for smaller diameters (up to 300 mm) and bundled coils or coil‑drums for larger sections. Packaging must meet ASTM D3951 or equivalent for export, and moisture content is usually limited to below 0.5 % to prevent corrosion during transit. Common destination markets include Saudi Arabia, United Arab Emirates, Vietnam, Turkey and Brazil, where construction, infrastructure and energy projects drive demand for seamless and coated steel pipe.

Sourcing from Shandong Wan Steel Import And Export Co., Ltd. - Buyer Guidance

When sourcing from this supplier, request the latest mill test report for each pipe grade, confirming chemical analysis, tensile strength, elongation and dimensional tolerances. For API‑5L items, ask for an API‑5L certificate and evidence of hydrostatic testing at the appropriate pressure class. Galvanised hollow sections should be accompanied by a coating certificate confirming zinc thickness and adherence to ISO 1461. Verify whether the supplier holds ISO 9001 or other quality management certifications, as these are standard expectations for steel pipe exporters from China.

Typical minimum order quantities for seamless carbon steel pipe range from one 20‑ft container (approximately 12 metric tons) to larger bulk shipments, depending on diameter and wall thickness. Lead times in China for standard grades are usually 30‑45 days from order confirmation, extending to 60 days for API‑5L grades that require additional testing. Buyers should also confirm packaging details (e.g., timber pallets, shrink‑wrap) and the preferred Incoterm before finalising the purchase.

What HS codes apply to the seamless carbon steel pipes listed by Shandong Wan Steel?

The seamless carbon steel pipes are classified under HS code 7304.19, while the BSI‑standard tube uses 7304.31 and the galvanised hollow sections fall under HS code 7306.61.

Which material standards are referenced for the API‑5L pipe?

The product description cites API 5L grades X42, X52, X60, X65 and X80, which correspond to the API 5L‑2 specification for line pipe used in oil and gas transmission.

Are coating certificates required for the galvanised hollow sections?

Buyers typically request a coating certificate that verifies compliance with ISO 1461 or ASTM A123, confirming zinc coating thickness and adhesion.

What documentation should be requested before placing an order?

Mill test reports, API‑5L certificates (if applicable), coating certificates for galvanised products, and any ISO 9001 quality management certification should be obtained.

What are the common packaging methods for these steel pipe products?

Standard packaging includes timber pallets with shrink‑wrap for bundled pipes, and coil‑drums or bundled bundles for larger diameters, complying with ASTM D3951 export packaging standards.

Which Incoterms are most frequently used for exporting these items from China?

Exporters from China often use FOB Shanghai or FOB Qingdao for containerised shipments, and CIF for larger bulk deliveries to overseas ports.

What typical lead time can a buyer expect for API‑5L pipe?

Lead times for API‑5L pipe generally range from 45 to 60 days, reflecting the additional testing and certification steps required for pressure‑rated grades.

What are the usual minimum order quantities for the listed pipe products?

Minimum order quantities commonly start at one 20‑ft container, roughly 12 metric tons, though larger orders may be required for specific diameter or wall‑thickness specifications.