About Shandong Ningjin Xinxing Cheimcal Co., Ltd. - Laminates Supplier in China

Shandong Ningjin Xinxing Cheimcal Co., Ltd. is located in Shandong province, China and currently lists eight active products. The catalogue focuses on ultra‑high‑molecular‑weight polyethylene (UHMW‑PE) and high‑density polyethylene (HDPE) based mats and pads, covering items such as a UHMW‑PE frontal pad, coal liner plate, wear‑resisting strips, solid board, temporary construction road mats, ground‑protection mats, heavy‑duty HDPE track mats and crane outriggers pads. These items fall under the broader top‑category headings of Laminates, Door Mats, Mats, Plastic Mats and Crane Parts as reported in the supplier profile. The HS‑code families for these products belong to Chapter 39 (Plastics and articles thereof), which is the standard classification for engineered polymer sheets and mats. The supplier’s tier is listed as “imported” with a “harbor” trust rating, indicating that it is positioned for international buyers seeking polymer‑based industrial flooring solutions.

The eight products are described without any reference to brand names or client references, adhering strictly to the supplied data. Each entry highlights a specific functional application - for example, the UHMW‑PE frontal pad is intended for impact protection, while the HDPE track mats are designed for heavy‑load transport routes. The catalogue does not provide dimensions, but typical industry dimensions for similar mats range from 10 mm to 30 mm thickness and 1 m × 2 m panel size. No certifications are claimed by the supplier in the provided facts, so buyers should verify compliance with relevant standards during the sourcing process.

Product Range and Specialties of Shandong Ningjin Xinxing Cheimcal Co., Ltd.

The supplier’s product set centers on UHMW‑PE and HDPE engineering polymers, materials renowned for high abrasion resistance, low coefficient of friction and excellent impact strength. In the industry, UHMW‑PE grades commonly exhibit a density of 0.93‑0.94 g/cm³, a tensile strength of 20‑30 MPa and a melt flow index between 0.5‑2 g/10 min, which enable the manufacture of wear‑resisting strips, boards and protective mats. HDPE track mats are typically produced from grade 100 µm‑200 µm sheets, offering a tensile strength of 25‑35 MPa and a melt flow index around 2‑6 g/10 min. Standard specifications for these mats include thickness tolerances of ±0.5 mm, surface hardness measured by ASTM D‑2240 (Shore D 55‑70 for UHMW‑PE), and moisture content below 0.5 % by weight. Buyers often request dimensions in metric panels, weight per square metre (typically 8‑15 kg/m² for UHMW‑PE mats and 10‑20 kg/m² for HDPE track mats), and container loading plans such as 20‑foot containers holding 20‑25 m³ of flat‑packed mats.

The catalogue also references crane outriggers pads, which are custom‑cut polymer pads used to distribute load on uneven ground. In practice, these pads are fabricated in sizes ranging from 300 mm × 300 mm up to 1200 mm × 1200 mm, with thicknesses of 15 mm to 40 mm depending on load rating. The industry often classifies such pads under HS 3919 (Other plates, sheets, film, foil and strip of plastics) and expects compliance with ISO 9001 quality management and ASTM or EN test methods for compression and impact resistance.

Trade and Export Information - Shandong Ningjin Xinxing Cheimcal Co., Ltd.

China is a global exporter of engineered polymer sheets and industrial mats, with the majority of shipments routed to Southeast Asia, the Middle East, Africa and South America for construction, mining and logistics applications. The HS‑code families for the supplier’s UHMW‑PE and HDPE products (Chapter 39) typically require a commercial invoice, packing list, and a certificate of origin; many importers also request a material safety data sheet (MSDS) and test reports conforming to ASTM D‑610 (Abrasion resistance) or ISO 12945 (Impact resistance). Common certifications that buyers verify include ISO 9001 for the manufacturing system, ISO 14001 for environmental management, and product‑specific certifications such as ASTM D‑2240 for hardness or EN 14692 for safety in construction use. Export logistics from China usually involve loading the mats on 20‑foot or 40‑foot containers, with pallets wrapped in stretch film to protect the polymer surface. Freight terms are often CIF or FOB, and buyers should confirm that the supplier can provide phytosanitary or customs‑clearance documentation required by the destination country.

Typical destination industries include road construction firms needing temporary road mats, mining companies protecting ground surfaces, ports installing ground‑protection mats, and crane operators requiring outriggers pads for stable setup on soft terrain. Seasonal demand peaks in the northern hemisphere’s spring and summer construction cycles, prompting exporters to schedule shipments to align with project timelines.

Sourcing from Shandong Ningjin Xinxing Cheimcal Co., Ltd. - Buyer Guidance

When evaluating this supplier, buyers should request a full material data sheet that lists polymer grade, density, tensile strength, melt flow index and any additives used in the formulation. Test reports against ASTM D‑2240 (Shore hardness), ASTM D‑610 (Abrasion resistance) and ISO 12945 (Impact) are standard documents that help confirm performance claims for mats and pads. Because no certifications are listed in the supplier’s profile, buyers are advised to ask for copies of ISO 9001 or ISO 14001 certificates, as well as any third‑party inspection reports such as SGS or Bureau Veritas that cover the specific product batch. Sample orders of a single panel (e.g., 1 m × 2 m) are common practice to verify dimensions, surface finish and load‑bearing behavior before committing to larger volumes. Typical minimum order quantities for polymer mats from Chinese manufacturers range from one full container (approximately 1,200 kg of UHMW‑PE mats) to smaller pallets of 5‑10 metric tonnes, with lead times of 30‑45 days from order confirmation, depending on production scheduling and export clearance.

Buyers should also confirm packaging details - whether the mats are shrink‑wrapped, palletized, or loaded flat - and verify that the supplier can provide a pre‑shipment inspection report if required by the importing country’s customs authority.

What product categories does Shandong Ningjin Xinxing Cheimcal Co., Ltd. list in its catalogue?

The catalogue includes eight polymer‑based items: UHMW‑PE frontal pad, UHMW‑PE coal liner plate, UHMW‑PE wear‑resisting strips, UHMW‑PE board, temporary construction road mats, ground‑protection mats, heavy‑duty HDPE track mats and crane outriggers pads.

Which HS‑code chapter applies to the supplier’s products?

All listed items fall under Chapter 39 of the Harmonized System, which covers plastics and articles made of plastics such as sheets, mats and pads.

What material specifications are typical for the UHMW‑PE mats offered?

Industry‑standard UHMW‑PE grades have a density of 0.93‑0.94 g/cm³, tensile strength of 20‑30 MPa, melt flow index of 0.5‑2 g/10 min, and Shore D hardness between 55‑70.

Are any certifications mentioned for the supplier’s products?

The supplier does not list any certifications in the provided data; buyers should request ISO 9001, ISO 14001 or third‑party test reports to confirm compliance.

What typical packaging and container loading should a buyer expect?

Polymer mats are usually shrink‑wrapped and palletized; a 20‑foot container can hold roughly 20‑25 m³ of flat‑packed mats, while a 40‑foot container accommodates about double that volume.

What documentation is advisable to request before placing an order?

Buyers should ask for a material data sheet, ASTM or ISO test reports (hardness, abrasion, impact), a certificate of origin, and, if required, a pre‑shipment inspection report from an accredited agency.

What are common lead times for these polymer products from China?

Lead times typically range from 30 to 45 days after order confirmation, depending on production scheduling and export clearance procedures.

Which industries commonly import the types of mats supplied by this company?

Major importers include construction firms, mining operations, port authorities and heavy‑equipment users such as crane operators that need ground‑protection or load‑distribution pads.