About Shaanxi Well Titanium Manufacturer Co., Ltd. - Titanium Supplier in China

Based in China, Shaanxi Well Titanium Manufacturer Co., Ltd. lists six distinct titanium products in its catalogue. All items fall under HS chapter 81, specifically HS code 8108.90, which covers other articles of titanium. The product list includes Titanium Seamless Tube, Titanium Pipe, Titanium Plate/Roll/Foil, Titanium Rod, Titanium Wire, and Titanium Fasteners and Machined Parts. Each entry specifies the material grade, ranging from commercially pure Grade 2 to alloy Grade 5 (Ti‑6Al‑4V). The catalogue does not provide additional product specifications beyond material type and HS code.

The catalogue groups all products under the same HS code despite differing forms such as tubes, plates, and wires. Materials are identified as either commercially pure titanium (Grade 2) or the high‑strength Ti‑6Al‑4V alloy (Grade 5). No information on dimensions, tolerances, or surface treatments is supplied. The supplier’s trust tier is listed as “harbor”, indicating a mid‑level verification level in trade platforms. Buyers can therefore expect the listed grades to align with standard international titanium specifications.

Product Range and Specialties of Shaanxi Well Titanium Manufacturer Co., Ltd.

The supplier’s catalogue covers six titanium product families, each supplied in Grade 2 (commercially pure) or Grade 5 (Ti‑6Al‑4V) material. In the broader market, seamless tubes and pipes are commonly produced to ASTM B265 or ISO 10628 standards, with typical outer diameters from 6 mm to 300 mm and wall‑thickness tolerances of ±0.1 mm. Plates, rolls and foils are usually supplied in thicknesses between 0.5 mm and 50 mm and conform to ASTM B265 for chemical composition and mechanical properties. Rods and bars follow ASTM F67 or ISO 5832‑1, with standard lengths of 6 m and diameters from 10 mm to 200 mm, and are often offered with surface finishes such as mill‑finished or polished. Titanium wire is typically produced to ASTM B486, with diameters from 0.1 mm to 2 mm and tensile strengths around 550 MPa for Grade 2. Fasteners and machined parts are generally machined to ISO 898‑1 for strength classes, with tolerances defined by ISO 2768‑m.

Trade and Export Information - Shaanxi Well Titanium Manufacturer Co., Ltd.

China is a major exporter of titanium products, and shipments under HS code 8108.90 are regularly directed to the United States, the European Union, Japan, and South Korea for aerospace, medical, and chemical processing applications. Buyers typically require certifications such as ISO 9001 quality management, AS9100 for aerospace, and ISO 13485 for medical devices, although the supplier’s catalogue does not list any specific certificates. Export shipments are usually packed in wooden crates or steel drums, with a standard 20‑ft container holding up to 12 tons of rolled or plate material and a 40‑ft container accommodating larger volumes of tubes or wire. Common Incoterms include FOB Shanghai or CIF destination port, and customs clearance may involve compliance with REACH for traceability of alloying elements.

Sourcing from Shaanxi Well Titanium Manufacturer Co., Ltd. - Buyer Guidance

Prospective buyers should request a Mill Test Report (MTR) for each titanium grade, confirming chemical composition, tensile strength, and oxygen content as per ASTM or ISO standards. Samples of the specific product form - tube, plate, or wire - are advisable to verify dimensional tolerances and surface finish before confirming a larger order. Verify whether the supplier can provide the required certifications (ISO 9001, AS9100, etc.) and ask for a declaration of conformity to the relevant ASTM/ISO specification. Typical minimum order quantities range from 500 kg for wire to 2 tons for plates, with lead times of 30‑45 days after order confirmation, depending on product form and grade.

What titanium grades does the supplier offer?

Shaanxi Well Titanium Manufacturer lists commercially pure Grade 2 and alloy Grade 5 (Ti‑6Al‑4V) for all six product families, including tubes, pipes, plates, rods, wire, and fasteners.

Which HS code applies to the products?

All listed items fall under HS code 8108.90, the category for “Other articles of titanium”.

How can a buyer verify the chemical composition?

Request a Mill Test Report that details the exact percentages of aluminum, vanadium, oxygen and other elements, matching the requirements of ASTM B265 or ISO 5832‑1 for the declared grade.

What are typical packaging and shipping methods?

Products are commonly packed in wooden crates or steel drums, loaded into 20‑ft or 40‑ft containers; FOB Shanghai or CIF destination port are the usual Incoterms for titanium exports from China.

Are there standard certifications buyers should ask for?

While the supplier’s catalogue does not state any, buyers normally request ISO 9001 quality‑management certification, and for aerospace or medical applications AS9100 or ISO 13485 respectively.

What are typical lead times and minimum order quantities?

Lead times are generally 30‑45 days after order confirmation; minimum order quantities are around 500 kg for wire, 1 ton for rods, and 2 tons for plates or rolled products.

Can the supplier provide custom dimensions or finishes?

The catalogue indicates standard grades but does not specify custom capabilities; buyers should inquire about tolerances, surface finishes (mill‑finished, polished) and any special machining requirements during the quotation stage.