About SAAS-AUS Pty Ltd - Hand Sanitizer Supplier in Australia

SAAS-AUS Pty Ltd is based in Australia and lists five active products on the platform. The catalogue includes a 3 Ply Face Mask and four variations of antibacterial hand sanitizer gel, including a 5 L bulk size and a formulation marketed as 75 % alcohol. The mask entry specifies HS code 6307.90 and identifies the material as polypropylene spunbond and meltblown nonwoven fabric. The hand sanitizer entries are described without HS codes but are presented as alcohol‑based gels. This composition reflects the supplier’s focus on personal protective equipment and disinfectant products.

The 3 Ply Face Mask is classified under the HS heading for other protective headgear, and the material composition aligns with typical non‑woven mask constructions used in medical and industrial settings. The hand sanitizer variants are positioned as antibacterial gels, with one product explicitly stating a 75 % alcohol content and another offered in a 5 L container for bulk use. All five products are listed under the supplier’s top categories of Hand Sanitizer, 3 Ply Face Mask, and Medical Face Masks. No additional certifications are recorded in the supplied data.

Product Range and Specialties of SAAS-AUS Pty Ltd

The catalogue lists a single mask type and four hand sanitizer formulations. The mask is a three‑layer construction using a polypropylene spunbond outer layer, a meltblown filter layer, and an inner spunbond layer, matching the common structure required for bacterial filtration efficiency (BFE) testing. In the sanitizer line, the products are alcohol gels with concentrations ranging from 75 % ethanol to unspecified antibacterial blends, and they are offered in standard retail bottles and a 5 L bulk container.

In the broader market, three‑ply polypropylene masks are typically evaluated against EN 14683 standards, with BFE ratings of 95 % or higher for Type II masks and particle filtration efficiency (PFE) of 98 % for surgical grades. Hand sanitizers destined for export often follow the WHO formulation (80 % ethanol or 75 % isopropyl alcohol) and are required to meet limits on methanol content and to provide a Certificate of Analysis confirming alcohol percentage. Common packaging includes 50 ml to 500 ml bottles for retail and 5 L or 20 L drums for institutional supply.

Trade and Export Information - SAAS-AUS Pty Ltd

Australian manufacturers of polypropylene masks and alcohol‑based hand sanitizers usually ship to North America, Europe and Southeast Asia, where demand for personal protective equipment remains strong. The mask’s HS code 6307.90 falls under the chapter for other protective headgear, which is subject to customs inspections for compliance with health‑safety standards such as ISO 13485 or EN 14683. Hand sanitizers are generally classified under HS chapter 38 (disinfectants) and buyers often request documentation that the product complies with local regulations on alcohol content and labeling.

Typical export documentation includes a commercial invoice, packing list, Certificate of Origin, and, where required, a test report confirming alcohol concentration for sanitizers or BFE/PFE results for masks. Buyers frequently specify Incoterms such as FOB Port of Melbourne or CIF to major Asian ports. Australian exporters must also adhere to the Therapeutic Goods Administration (TGA) guidelines for antiseptic products, which influence the need for GMP certification and safety data sheets.

Sourcing from SAAS-AUS Pty Ltd - Buyer Guidance

When evaluating SAAS‑AUS Pty Ltd, buyers should request a material safety data sheet (MSDS) for each hand sanitizer formulation and a Certificate of Analysis that details the exact alcohol percentage and any added antimicrobial agents. For the 3 Ply Face Mask, a test report showing bacterial filtration efficiency (BFE) or compliance with EN 14683 is essential to verify suitability for medical or industrial use.

Potential purchasers should also confirm packaging dimensions - e.g., masks typically packed in 50 count cartons that fit standard 20 ft containers, and sanitizers in 5 L drums that can be palletized - and inquire about minimum order quantities and lead times, which commonly range from two to four weeks for masks and three to six weeks for bulk sanitizer shipments.

What material is used in the 3 Ply Face Mask listed by SAAS‑AUS Pty Ltd?

The mask is constructed from polypropylene spunbond and meltblown nonwoven fabric. This material combination provides a breathable outer layer, a central filtration layer, and an inner comfort layer, which is standard for three‑ply protective masks.

Which HS code applies to the mask product?

The catalogue lists HS code 6307.90 for the 3 Ply Face Mask. This code falls under the heading for other protective headgear and is used by customs authorities to classify mask shipments.

What alcohol concentration is specified for the hand sanitizer products?

One hand sanitizer product is explicitly labeled as containing 75 % alcohol. Other antibacterial gel variants are described generically, which in the industry usually indicates an alcohol concentration between 70 % and 80 % to meet WHO disinfection standards.

What certifications are commonly required for these types of products?

For medical masks, buyers typically request ISO 13485 quality‑management certification or compliance with EN 14683 performance standards. Hand sanitizers are commonly required to provide a Certificate of Analysis, a GMP statement, and an MSDS that verifies alcohol content and ingredient safety.

What packaging sizes are available for the hand sanitizer line?

The hand sanitizer range includes standard retail bottles as well as a 5 L bulk container. Bulk units are generally packed in drums or pallets, allowing efficient loading into 20 ft or 40 ft containers for export.

What are typical minimum order quantities and lead times for the mask and sanitizer items?

Mask orders are usually placed in cartons of 50 to 100 pieces, with manufacturers needing two to four weeks to produce and ship the goods. Bulk hand sanitizer, such as the 5 L drums, often has a minimum order of several drums and a typical lead time of three to six weeks.

Which markets commonly import Australian‑made masks and sanitizers?

Australian mask and sanitizer producers commonly export to the United States, European Union countries, Japan, and Southeast Asian markets like Singapore and Malaysia. These regions import the products for healthcare facilities, commercial enterprises, and industrial hygiene programs.