About Qinyang Ren Shi Trading Co., Ltd. - Ambulances, Special Purpose Vehicles Supplier in China

Qinyang Ren Shi Trading Co., Ltd. is based in China and currently lists five active products on its catalogue. The portfolio spans personal protective equipment and specialised vehicle equipment, reflecting the company's placement in the Agriculture and Ambulances, Special Purpose Vehicles categories. The medical line includes three variants of disposable masks and a medical ventilator, while the vehicle line comprises a specially designed ambulance model. All products are presented under the relevant HS code families, with the ambulance classified under HS 8703.23. The supplier is identified with a harbor trust tier in trade platforms.

The mask offerings consist of a Disposable Three‑layer Medical Surgical Mask, a Disposable Protective Mask, and a Civil KN95 Mask, each targeting different protection levels. The Acm812 Special Ambulance is described as having a steel chassis with aluminum body panels and is listed with HS code 8703.23, which covers special purpose motor vehicles. The Medical Ventilator Y‑30t is listed without an HS code but falls within the medical device classification for respiratory support equipment. No additional certifications are stated in the supplier data. The catalogue therefore combines high‑volume consumables with low‑volume specialised equipment.

Product Range and Specialties of Qinyang Ren Shi Trading Co., Ltd.

The three mask types follow common industry constructions: a three‑layer non‑woven polypropylene web for the surgical mask, a single‑layer polypropylene filter for the protective mask, and a melt‑blown filter layer meeting KN95 specifications. In global trade, surgical masks are typically required to meet ASTM F2100 Level 2 or EN 14683 Type II, with bacterial filtration efficiency (BFE) of at least 98 % and a differential pressure below 5 mm H₂O cm⁻². KN95 masks are generally tested against the Chinese GB2626‑2006 standard, demanding 95 % filtration of particles ≥ 0.3 µm and a breathability limit of 350 Pa. The Acm812 ambulance conforms to the HS 8703.23 category for special purpose vehicles; such vehicles are usually built on a steel chassis, feature aluminum body panels to reduce weight, and must satisfy local crash‑worthiness and emission regulations. The Y‑30t ventilator is a pressure‑controlled respiratory device, commonly rated for tidal volumes of 300‑700 mL and pressure support up to 30 cm H₂O, and manufacturers typically operate under ISO 13485 quality management systems.

Masks are normally packed in sealed polybags of 50 units, placed in cartons of 1 000 masks, allowing a 20‑ft container to hold roughly 10 000 cartons. Ambulances are shipped as complete units on roll‑on/roll‑off vessels, while ventilators are boxed in anti‑static crates with foam inserts, suitable for air freight.

Trade and Export Information - Qinyang Ren Shi Trading Co., Ltd.

China is a leading exporter of medical protective equipment, and masks from the region are commonly classified under HS chapter 63 (protective clothing). Buyers in North America, the European Union and Southeast Asia typically request ASTM or EN certification documents, as well as third‑party test reports for BFE, particle filtration efficiency (PFE) and breathability. The ambulance vehicle, under HS 8703.23, is often exported to emerging markets and government procurement programs that require compliance with local vehicle type‑approval procedures, CE marking for the European market, and safety inspections by recognized classification societies. The Y‑30t ventilator falls under HS 9019 (medical devices) and is subject to CE marking in the EU, FDA 510(k) clearance in the United States, and mandatory ISO 13485 certification for quality management.

Standard Incoterms for these product groups include FOB or CIF from major Chinese ports such as Shanghai or Ningbo. Masks are typically loaded in 20‑ft or 40‑ft containers, with a 20‑ft unit capable of holding up to 10 million single‑use masks depending on packaging density. Ambulance units require flat‑rack or open‑top containers and are often shipped on roll‑on/roll‑off vessels, with a typical container capacity of one to two vehicle units. Ventilators are usually packed in export‑grade wooden crates, allowing 200‑300 units per 40‑ft container. Importing countries frequently demand pre‑shipment inspection reports and conformity certificates before customs clearance.

Sourcing from Qinyang Ren Shi Trading Co., Ltd. - Buyer Guidance

Prospective buyers should request sample masks for laboratory verification of BFE, PFE and differential pressure, and compare the results against ASTM F2100 or EN 14683 thresholds. For the KN95 mask, a certification copy of GB2626‑2006 compliance and a particle filtration test report are essential before placing a bulk order. When evaluating the Acm812 ambulance, buyers need the vehicle’s chassis certification, material test reports for the steel and aluminum components, and evidence of compliance with the destination country’s vehicle registration standards. The ventilator Y‑30t should be supplied with a CE Declaration of Conformity, ISO 13485 certificate, and performance data sheets covering tidal volume, pressure ranges and alarm functions.

Verification of the HS code declaration (8703.23 for the ambulance) and a full bill of materials helps confirm product classification for customs duties. Requesting a factory inspection report or third‑party audit can further validate production quality, especially for medical devices that are subject to strict regulatory scrutiny. Buyers should also clarify packaging details - such as mask count per bag, carton dimensions, and container load plan - to ensure smooth logistics and storage upon arrival.

What HS code is assigned to the Acm812 Special Ambulance?

The Acm812 Special Ambulance is listed with HS code 8703.23, which covers special purpose motor vehicles.

Which certifications are typically required for the Disposable Three‑layer Medical Surgical Mask?

Buyers usually require ASTM F2100 Level 2 or EN 14683 Type II certification, along with BFE ≥ 98 % and differential pressure below 5 mm H₂O cm⁻².

How can I verify the filtration performance of the Civil KN95 Mask?

Request a test report that demonstrates compliance with GB2626‑2006, showing ≥ 95 % particle filtration efficiency for 0.3 µm particles and the specified breathability limits.

What documentation should I ask for before purchasing the Medical Ventilator Y‑30t?

Ask for a CE Declaration of Conformity, ISO 13485 quality management certificate, and a performance data sheet detailing tidal volume, pressure support and alarm specifications.

What packaging format is common for the disposable masks listed by this supplier?

Masks are typically packed in sealed polybags of 50 units, grouped into cartons of 1 000 masks, which can be loaded into 20‑ft containers for bulk shipment.

Which Incoterms are most frequently used for exporting the ambulance vehicle from China?

FOB Shanghai and CIF Ningbo are common Incoterms for the Acm812 Special Ambulance, reflecting standard practice for heavy vehicle exports.

What should I check regarding the material composition of the ambulance chassis?

Verify the supplier’s material test reports for the steel chassis and aluminum body panels, and ensure they meet the destination market’s strength and corrosion‑resistance standards.