About Qingdao Lian Ya Boat Co., Ltd. - Boats & Vessels Supplier in China

China, specifically the coastal city of Qingdao, lists six distinct boat models under its catalogue. The supplier’s active product count of six falls within the broader Boats & Vessels category and includes a mix of rigid inflatable boats (RIB) and inflatable rubber craft. Each entry is identified by length or style, such as a 6.6 m rib boat, a 5.6 m rib boat, a luxury rib version, a generic inflatable rubber boat, a CE‑certified rigid inflatable, and a fiberglass‑hull rigid inflatable. The catalogue does not provide HS codes, so the description remains limited to the product titles as supplied.

The listed models cover both premium and utilitarian segments. The “Luxury Rib Boat” suggests higher‑end fittings, while the “Inflatable boat rubber boat” indicates a basic, fully inflatable hull. The CE‑marked rigid inflatable and the fiberglass‑hull rigid inflatable point to compliance with European safety standards for small craft. No additional product specifications, such as engine power or passenger capacity, are supplied beyond the names and lengths given.

Product Range and Specialties of Qingdao Lian Ya Boat Co., Ltd.

The supplier’s catalogue focuses on rigid inflatable boats (RIB) ranging from 5.6 m to 6.6 m and fully inflatable rubber boats. In the RIB market, hulls are commonly fabricated from marine‑grade aluminum or fiberglass, while the inflatable tubes are made of PVC, Hypalon, or a composite of both for UV and puncture resistance. Typical industry grades for these vessels include CE Class A or B certification, load capacities between 400 kg and 800 kg, and engine power recommendations of 30 hp to 150 hp depending on length. Buyers also look for features such as self‑bailing decks, stainless‑steel fittings, and optional outboard mounts.

For fully inflatable rubber boats, buyers often require PVC or Hypalon tubes with a minimum thickness of 0.8 mm, a weight‑to‑capacity ratio of roughly 1 kg per 3 kg of payload, and a maximum hull length of 4 m for easy transport. The “Luxury Rib Boat” would typically be equipped with higher‑grade interior upholstery, reinforced hull plating, and optional navigation electronics, aligning with premium market expectations.

Trade and Export Information - Qingdao Lian Ya Boat Co., Ltd.

China is a major exporter of small craft, and vessels that fall under HS Chapter 89, heading 8903 (boats, other than sailing vessels), are routinely shipped to Southeast Asian, European, North American, and Australian markets. The RIBs and inflatable boats listed by this supplier would be classified under sub‑headings such as 8903.99 (other vessels) or 8903.10 (inflatable boats), depending on hull construction. Importers usually request CE conformity documents, ISO 1496‑2 test reports for stability, and, for the U.S. market, USCG approval or ASTM F2363 compliance.

Logistically, a 6.6 m RIB can be containerised in a 20‑ft container with the hull disassembled, while fully inflatable boats are often packed flat in wooden crates or bulk bags. Common Incoterms for Chinese boat exporters are FOB Qingdao or CIF major ports. Export licences are generally not required for standard recreational craft, but phytosanitary certificates may be needed for certain wooden components.

Sourcing from Qingdao Lian Ya Boat Co., Ltd. - Buyer Guidance

When sourcing from this supplier, request the CE Declaration of Conformity for the rigid inflatable models and any ISO 1496‑2 stability test reports. Verify the material specification of the inflatable tubes (PVC vs. Hypalon) and ask for tensile strength data, typically expressed in MPa, to confirm durability. Samples of the hull construction, especially for the fiberglass‑hull RIB, should be inspected for laminate schedule and resin type before finalising a purchase.

Buyers should also confirm the maximum passenger and payload ratings, engine power recommendations, and warranty terms. Ensure that packaging details (e.g., crate dimensions, protective padding) match the shipping method and that the supplier can provide a pre‑shipment inspection certificate or third‑party quality audit if required by the importing country.

What lengths are available in the supplier’s RIB lineup?

The catalogue lists rigid inflatable boats of 5.6 m and 6.6 m length, plus a luxury variant that falls within the same size range.

Are the rigid inflatable boats CE certified?

One model is explicitly described as a “Rigid Inflatable boat CE,” indicating CE classification; buyers should request the CE Declaration of Conformity for verification.

What material is used for the inflatable tubes?

The facts do not specify tube material, but typical RIB tubes are made from PVC or Hypalon; buyers should ask the supplier to confirm the exact polymer and thickness.

Can the inflatable boats be shipped in containers?

Fully inflatable rubber boats are usually packed flat and can be loaded into 20‑ft or 40‑ft containers; the supplier’s logistics capabilities should be confirmed for containerisation.

Which HS codes apply to these vessels?

Small craft of this type are generally classified under HS heading 8903 (boats), with sub‑headings such as 8903.99 for other vessels or 8903.10 for inflatable boats.

What certifications should an importer request?

Typical requirements include the CE Declaration of Conformity, ISO 1496‑2 stability test report, and, for U.S. imports, USCG approval or ASTM F2363 compliance.

What is a typical lead time for a 6.6 m RIB?

Lead times for Chinese‑manufactured RIBs of this size usually range from 30 to 60 days after order confirmation, depending on production scheduling and any custom specifications.

What packaging is used for the fiberglass‑hull rigid inflatable?

Fiberglass hulls are commonly crated in wooden boxes with internal foam padding to protect the laminate during sea freight; buyers should request packaging drawings or photos before shipment.