About Prs Compresssors Private Limited - Compressors Supplier in India

India is the base of Prs Compresssors Private Limited. The supplier currently lists 28 distinct products across several industrial categories. Its catalogue includes various types of compressors, such as rotary screw, scroll, piston and reciprocating models, as well as related components like control panels and air filters. The product set also covers fuel and energy resources, air‑conditioner parts, flanges, screws, panels and industrial pumps. All entries are organized under the listed top categories and reflect the company’s focus on compression and related equipment.

Specific items include rotary screw compressors, energy‑saving 1:1 direct‑drive units, oil‑free scroll compressors ranging from 0.4 m/min to 3.2 m/min flow rates, and a 10 HP piston compressor. The catalogue lists a seamless pipeline product classified under HS code 7307.19, manufactured from carbon steel A105 or stainless steel 304/316. Additional offerings comprise advanced microprocessor‑based control systems, high‑capacity dual air filtration units, oil separation systems and a variety of compressor spares and accessories. The supplier also provides portable units such as a 1 hp dental air compressor and a portable piston compressor. Each product is presented without explicit certification claims in the provided data.

Product Range and Specialties of Prs Compresssors Private Limited

The listed compressors span rotary screw, scroll and piston technologies. In the industry, rotary screw compressors are typically rated up to 10 bar pressure, deliver 500‑2000 L/min airflow, and adhere to ISO 1217 performance testing; they are commonly built from cast iron or aluminium alloy housings. Oil‑free scroll compressors are valued for low noise (≤ 70 dB(A)) and clean air output, with flow capacities expressed in m³/min and compliance with IEC 60335‑2‑81 and CE marking. Piston and reciprocating units are often rated by horsepower (1‑10 HP) and operate at pressures up to 8 bar, with ISO 8578 governing safety and performance. The seamless pipeline under HS code 7307.19 is typical of carbon‑steel A105 or stainless‑steel 304/316 pipe products used for high‑pressure fluid transport, conforming to ASTM A105 or ASTM A312 specifications.

Control panels and microprocessor‑based control systems follow IEC 60204‑1 for electrical safety and may include HMI interfaces, while air‑filter and dual‑filtration units are usually rated by filtration efficiency (e.g., > 99.5 % at 0.3 µm) and pressure drop. Compressor spares such as screw profiles, oil‑separation modules and accessories are produced to match the original equipment dimensions and material grades to ensure interchangeability.

Trade and Export Information - Prs Compresssors Private Limited

India is a significant exporter of industrial compressors, with major destination regions including the Middle East, Africa, Southeast Asia and Europe. Compressors fall under HS chapter 84 (e.g., HS 8424.90 for air‑compressor units) and are routinely inspected for CE conformity, ISO 9001 quality‑management certification and, where required, ATEX or IECEx approval for use in hazardous environments. The seamless pipeline product (HS 7307.19) is shipped in standard 20‑ft or 40‑ft containers, often crated to protect the pipe ends, and may be subject to Indian export licensing and destination‑country customs inspections for steel products.

Typical Incoterms used by Indian suppliers are FOB or CIF, with packaging that meets ASTM D3951 for export. Buyers should anticipate container loading plans that account for the weight of steel pipelines (approximately 7‑8 t per 20‑ft container) and the volumetric dimensions of compressor units, which influence freight costs and handling requirements.

Sourcing from Prs Compresssors Private Limited - Buyer Guidance

Before ordering, buyers should request a detailed product data sheet that includes rated pressure, flow rate, power consumption, noise level and dimensions for each compressor model. Verification of a CE Declaration of Conformity, ISO 9001 certificate and, if applicable, ATEX or IECEx test reports will confirm compliance with safety and market‑specific standards. For the seamless pipeline, a material test certificate confirming grade A105 or 304/316 composition and compliance with ASTM A105 or ASTM A312 should be obtained.

When evaluating samples, check the scroll compressor’s oil‑free seals for wear resistance, confirm the screw compressor’s clearance tolerances, and validate the control panel’s wiring diagram against IEC 60204‑1. Confirm that packaging meets the buyer’s handling requirements - wooden crates for heavy units, protective dunnage for pipelines - and that the shipping terms (FOB, CIF) and container size (20‑ft or 40‑ft) align with the order volume.

What types of compressors are available from Prs Compresssors Private Limited?

The supplier lists rotary screw compressors, oil‑free scroll compressors in several size classes (0.4 m/min to 3.2 m/min), piston compressors up to 10 HP, and reciprocating compressors, together with related accessories such as control panels and air‑filter units.

Which HS code applies to the seamless pipeline product and what material options are offered?

The seamless pipeline is catalogued under HS code 7307.19 and is supplied in carbon steel grade A105 or stainless steel grades 304/316.

What standard specifications should a buyer verify for the scroll compressors?

Buyers should verify compliance with ISO 1217, check the rated pressure (typically up to 8 bar), flow capacity (0.4‑3.2 m³/min), oil‑free design, and request a CE Declaration of Conformity and noise level data (usually ≤ 70 dB(A)).

Are there typical certifications required for Indian‑origin compressors?

Importers usually require ISO 9001 quality‑management certification, CE marking for EU markets, and, where applicable, ATEX or IECEx certification for equipment used in explosive atmospheres.

What packaging and container sizes are commonly used for these products?

Larger units such as screw or scroll compressors are typically packed in wooden crates or metal frames and shipped in 20‑ft or 40‑ft containers; pipelines are coiled or bundled and placed in standard containers with protective dunnage.

What documentation should be requested before placing an order?

Buyers should ask for a product data sheet, performance curve, material test certificate for pipelines, CE Declaration of Conformity, ISO 9001 certificate, and any relevant third‑party test reports such as noise or energy‑efficiency testing.

What are typical lead times and minimum order quantities for these items?

Lead times generally range from four weeks for standard scroll or screw compressors to eight‑12 weeks for customized pipeline lengths; minimum order quantities are usually one unit for compressors and a single bundle (approximately 10 m) for pipelines, unless bulk arrangements are negotiated.