Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›
Agriculture›
Apparel and fashion accessories›
Construction & real estate›💡Electronic & Electrical›🍎Food & Beverages›🛋️Home furnishing & supplies›⚗️Industrial goods & chemical›🪨Minerals & metals›📦Miscellaneous›











Liaoning EO Technology Co., Ltd. is based in China and currently lists 15 active products across its catalogue. The company’s primary focus is on copper materials, including pure copper rod, foil, busbar, sheet and tube, which fall under HS Chapter 74 (e.g., 7407.11, 7407.12, 7409.11, 7409.19). These copper items are described as electrolytic refined or tough‑pitch grades with minimum purities of 99.9 % and, for the foil, 99.99 % copper. In addition to copper, the catalogue contains video cable adapters classified under HS 8536.90, and several IP‑rated security cameras without HS codes listed. Other entries include PTFE‑based mechanical seal plates and a UV wood paint, expanding the product mix beyond metals.
The copper rod is offered as a standard electrolytic refined grade (UNS C10100/C11000) suitable for electrical conductors and heat‑exchange applications. Copper foil is supplied with 99.99 % purity, a common specification for printed circuit board (PCB) laminates and battery tab applications. Busbars and sheets are identified as ETP copper, a material frequently used in power distribution panels where low resistivity is critical. The copper tube, also 99.99 % pure, matches typical dimensions for hydraulic and refrigeration lines. Security cameras listed include bullet, dome, PTZ and HD variants, which are typical IP‑based surveillance devices used in commercial and industrial settings. The PTFE plates and boards are standard engineering plastics employed in high‑temperature sealing and electrical insulation.
The catalogue features pure copper rod, foil, busbar, sheet and tube, each conforming to electrolytic refined or tough‑pitch grades that are standard in the electrical and industrial sectors. Typical copper rod diameters range from 6 mm to 50 mm with tolerance ±0.2 mm, while foil thicknesses are commonly 0.01 mm to 0.2 mm and measured in microns. Busbars are usually supplied in widths of 50 mm to 200 mm and thicknesses of 2 mm to 10 mm, complying with IEC 60228 class 1 conductivity requirements. Copper sheets often appear in thicknesses from 0.2 mm to 5 mm and are rolled to dimensions up to 2000 mm × 2000 mm. Copper tube specifications typically include nominal diameters from 10 mm to 100 mm with wall thicknesses adhering to ASTM B88 standards. The composite video cable adapter combines phosphor‑bronze contacts with gold‑plated connectors, a material pairing that meets IEC 60757 for contact resistance. Security cameras such as bullet, dome, PTZ and HD models generally support IP 66 or IP 67 ingress protection and resolutions from 2 MP to 4 MP, aligning with ONVIF profile S standards. PTFE plates and boards are engineered for continuous service up to 260 °C, with typical board thicknesses of 1 mm to 10 mm, while UV wood paint is formulated for exterior wood protection with UV‑stabilizers.
The pure copper rod is specified as electrolytic refined copper with a minimum purity of 99.9 % Cu, as stated in the product description.
Copper foil is listed as 99.99 % electrolytic copper and typically conforms to IEC 60384‑9 for flexible printed circuit applications.
The catalogue assigns HS 7407.12 to pure copper rod, 7407.11 to busbar and tube, and 7409.11/7409.19 to copper foil and sheet respectively.
The security cameras are described as IP‑rated devices, commonly meeting IP 66 or IP 67 standards for dust and water resistance.
The adapter uses phosphor bronze contacts with gold plating, housed in an ABS plastic shell, matching the listed material composition.
Explore similar suppliers, related products and trending categories