About Jui Chih Machinery Industrial Co., Ltd - Light & Medium Machinery Supplier in Taiwan

Taiwan‑based Jui Chih Machinery Industrial Co., Ltd lists ten active products in its catalogue. The company groups these items under categories such as Light & Medium Machinery, Heavy Machinery, Welding & Wire Mesh Machinery, Dispensing Systems and Scientific Instruments, reflecting a focus on equipment for bicycle and motorcycle production lines. The catalogue includes pipe pretreatment and disc cutting equipment, brazing frame assembly welders, manual swaging machines, B.B. threading units, nipple feeding stations, front derailleur assembling test rigs, handlebar tube shrinking devices, carbon pipe auto‑cutting machines, a complete motorcycle production line, and a frame accurate gauge. Each entry corresponds to a distinct piece of production or testing machinery used in the assembly or quality control of two‑wheel vehicles.

The product set covers both metal and composite component processing, from pipe preparation to final frame measurement. Mechanical functions range from cutting and shaping (e.g., pipe disc cutting, carbon pipe auto‑cutting) to joining processes (e.g., brazing frame assembly, manual swaging) and precision testing (e.g., frame accurate gauge). The inclusion of both light‑weight and heavy‑duty equipment aligns with the listed top categories, providing a full suite of tools for manufacturers that need to integrate marking, welding, and assembly operations within a single production line.

Product Range and Specialties of Jui Chih Machinery Industrial Co., Ltd

The listed machinery reflects common equipment found in bicycle and motorcycle manufacturing. Cutting machines such as pipe disc cutters and carbon pipe auto‑cutters typically operate with laser or high‑speed steel blades and are calibrated to tolerances of ±0.1 mm, often complying with ISO 2768 general tolerances. Welding and brazing stations, including the brazing frame assembly and manual swaging units, usually adhere to DIN 16890 or AWS standards for joint strength and are equipped with programmable controllers for repeatable heat cycles. Threading machines for B.B. components and nipple feeding systems are designed for metric thread profiles (e.g., M5‑M8) and often feature automatic torque verification. Test equipment like the front derailleur assembling rig and frame accurate gauge employ digital readouts and can measure alignment deviations down to 0.05 mm, supporting quality control procedures required by major bicycle OEMs.

Trade and Export Information - Jui Chih Machinery Industrial Co., Ltd

Taiwan is a recognized exporter of industrial machinery, especially equipment serving the two‑wheel vehicle sector. Products in this segment are generally classified under HS Chapter 84 (machinery) - for example, cutting and forming machines fall under sub‑heading 8425, while welding and assembly equipment may be recorded under 8465. Major import markets include the European Union, United States, Japan and Southeast Asian countries, where manufacturers seek CNC‑controlled, energy‑efficient machines that meet CE and ISO safety requirements. Export shipments are typically packed in 20‑ft or 40‑ft containers with wood‑crating or metal‑frame pallets, and Incoterms such as CIF or FOB are common. Taiwanese exporters often provide pre‑shipment inspection reports (e.g., SGS or Bureau Veritas) to satisfy buyer‑side compliance checks.

Buyers sourcing machinery of this type should verify that the equipment complies with the destination country’s safety directives - for EU buyers CE marking is standard, while North American purchasers often request UL or CSA certification. Requesting a factory acceptance test (FAT) report, performance curves (e.g., power consumption, cutting speed), and a compliance declaration for ISO 9001 or ISO 14001 can clarify the supplier’s quality system. Confirming packaging details (inner cushioning, moisture‑proof wrapping) and securing a freight forwarder experienced with heavy machinery containers helps avoid damage during transit.

Sourcing from Jui Chih Machinery Industrial Co., Ltd - Buyer Guidance

When evaluating Jui Chih Machinery Industrial’s offerings, request detailed technical data sheets that list machine dimensions, power ratings (kW), operating voltage, and precision tolerances. Ask for certification copies such as CE Declaration of Conformity, and if available, any ISO 9001 audit reports, as these are typical baseline requirements for industrial equipment imports. Arrange a site visit or virtual demonstration to observe the equipment’s CNC control interface and safety interlocks, and request a sample of the control software or a trial run if the order volume justifies it. Verify that the supplier can provide spare‑part kits, on‑site installation support, and a warranty period of at least 12 months, which are common expectations for high‑value machinery.

What types of machinery does Jui Chih Machinery Industrial list in its catalogue?

The catalogue includes pipe pretreatment and disc cutting equipment, brazing frame assembly welders, manual swaging machines, B.B. threading units, nipple feeding stations, front derailleur assembling test rigs, handlebar tube shrinking devices, carbon pipe auto‑cutting machines, a complete motorcycle production line and a frame accurate gauge.

Which HS chapters are most relevant for these machines?

These machines are generally classified under HS Chapter 84 - machinery. Cutting and forming equipment often use sub‑heading 8425, while welding and assembly devices fall under 8465.

What certifications should a buyer request for this equipment?

Buyers typically ask for CE marking for EU markets, and may request UL or CSA certification for North America. ISO 9001 audit reports are also common for verifying the supplier’s quality management system.

Are there standard performance specifications for the cutting machines?

Cutting machines for pipe and carbon pipe processing usually specify a cutting tolerance of ±0.1 mm, blade speed up to 300 m/min, and power consumption between 3 kW and 7 kW depending on size.

What is a typical lead time for these types of machines?

Lead times for fully assembled industrial machinery of this class range from 8 to 12 weeks after receipt of a confirmed purchase order and all required technical drawings.

What packaging and shipping methods are used for these machines?

Equipment is normally crated in wood or metal frames, protected with foam inserts, and loaded into 20‑ft or 40‑ft containers. Incoterms such as CIF or FOB are routinely applied.

What minimum order quantities apply?

Because each item is a standalone piece of equipment, the minimum order quantity is typically one unit per model, though custom configurations may require a higher batch size.

How can a buyer obtain a sample or demonstration?

The supplier can arrange a virtual demo of the machine’s control interface or schedule a on‑site trial at the buyer’s facility, usually after a signed confidentiality agreement and a deposit covering travel costs.