About Jugetek Shanghai Co., Ltd - Agriculture Supplier in China

Based in Shanghai, China, Jugetek Shanghai Co., Ltd currently lists eight active product lines. The catalogue focuses on stepper motor solutions, including NEMA17 and NEMA11 variants, driver modules, and integrated motor‑controller assemblies. Products are identified by model type such as “NEMA17 stepper motor for 3D printer” or “Ultraflat stepper motor NEMA11”. The range also covers communication‑enabled controllers using RS485 and CANopen protocols. All items fall under the broader agriculture category as reported in the supplier’s classification.

The eight listed items span mechanical and electronic components that are commonly referenced by their NEMA frame size and gear configuration. Examples include a flange‑geared NEMA17 motor and an all‑in‑one NEMA17 unit that combines motor and driver in a single housing. The catalogue mentions both standalone drivers and integrated motor‑controller modules, indicating a focus on turnkey solutions for automation equipment. No HS codes are provided in the source data. The supplier’s trust tier is classified as “harbor”, indicating a moderate level of verification within the platform.

Product Range and Specialties of Jugetek Shanghai Co., Ltd

The supplier’s catalogue comprises four motor‑only items (standard NEMA17, ultraflat NEMA11, flange‑geared NEMA17 and a combined NEMA17 unit) and four controller‑oriented items (stand‑alone stepper driver, RS485‑based controller, CANopen controller and an all‑in‑one motor‑driver assembly). In the broader stepper‑motor market, NEMA17 frames typically deliver holding torques between 40 N·cm and 80 N·cm, operate at 1.8° step angle, and are supplied for 12 V‑24 V systems. NEMA11 models are usually used where space is limited and provide lower torque, often 10 N·cm‑20 N·cm. Controllers that support RS485 or CANopen follow IEC 61800‑5‑1 and IEC 61800‑9‑2 standards for industrial communication. Buyers often request datasheets that list coil resistance, inductance, RMS current, and microstepping capability, as well as mechanical dimensions and mounting hole patterns.

Trade and Export Information - Jugetek Shanghai Co., Ltd

China is the world’s largest exporter of stepper motors and related control electronics, with the majority of shipments classified under HS chapter 85 (electrical machinery). Typical HS codes for the listed items are 8501.30 for the motors and 8542.31 for the driver/controller assemblies. Export shipments from Shanghai ports frequently target Europe’s automotive and robotics sectors, North America’s additive‑manufacturing industry, and Southeast Asia’s consumer‑electronics manufacturers. Buyers generally require CE marking, RoHS compliance and, where applicable, ISO 9001 certification for quality management. Standard packaging includes anti‑static poly‑bags inside reinforced wooden crates, suitable for 20‑foot or 40‑foot containers, and Incoterms such as FOB Shanghai or CIF destination are commonly used.

Sourcing from Jugetek Shanghai Co., Ltd - Buyer Guidance

When sourcing stepper motors from this supplier, request the full technical datasheet that specifies holding torque, step angle, rated voltage, current per phase and thermal resistance. For controller units, ask for protocol compliance test reports (RS485 and CANopen) and verify that the firmware adheres to IEC 61800‑5‑1. Samples of the motor and controller should be inspected for dimensional accuracy of the NEMA mounting flange and for clean solder joints on driver boards. Confirm that the supplier can provide CE and RoHS certificates, and consider asking for a third‑party inspection report if large volumes are planned. Typical minimum order quantities for discrete motors range from 100 to 500 units, with lead times of 15‑30 days after order confirmation.

What frame sizes are available in Jugetek’s stepper motor catalogue?

The catalogue lists NEMA17 and NEMA11 frame sizes. NEMA17 is the standard size for most 3D printers and CNC machines, while NEMA11 is used for compact applications.

Do the controller products support industrial communication protocols?

Yes. One controller uses an RS485 protocol and another implements the CANopen bus, both of which are common in factory automation and robotics.

What typical electrical specifications should a buyer verify?

Buyers should check rated voltage (usually 12 V‑24 V), coil resistance, RMS current per phase and holding torque. Microstepping capability and driver voltage ripple are also relevant.

Which certifications are normally required for stepper motors from China?

Importers usually request CE marking, RoHS compliance and, if the supplier has them, ISO 9001 quality‑management certification. These documents should be provided before shipment.

How are the products packaged for overseas shipment?

Standard practice is to place each motor or controller in an anti‑static bag, then pack multiple units in a reinforced wooden crate. The crates are sized for 20‑foot or 40‑foot containers.

What are common Incoterms used for exporting these items?

Exporters from Shanghai often quote FOB Shanghai or CIF destination ports. The choice depends on the buyer’s preference for freight handling.

What lead time can a buyer expect after placing an order?

Typical lead times are 15 to 30 days for the motor and controller units, assuming the order meets the supplier’s minimum quantity.

Is it possible to obtain a functional sample before a full order?

Suppliers usually provide a single unit sample for testing. The sample should be evaluated for mechanical fit, torque performance and communication protocol compliance before committing to larger volumes.