About Jozo Electric Wire - Metal Wire Supplier in China

Jozo Electric Wire is based in China and currently lists five distinct wire products in its catalogue. The company categorises its output under metal wire, metallic elements, nickel wires and titanium wire. Each product is offered as a specialty alloy wire suitable for high‑temperature or high‑strength applications. The catalogue includes molybdenum, nickel, titanium, nichrome and monel alloy wires. The nichrome and monel entries are accompanied by HS codes 7403.29 and 7505.22 respectively, indicating classification under copper‑alloy and nickel‑alloy wire categories.

The molybdenum wire entry is listed without a specific HS code but falls under HS chapter 74 for copper and other non‑ferrous metal products. Nickel and titanium wires are similarly grouped within the same chapter, reflecting their status as non‑ferrous alloy conductors. Nichrome wire is defined as a nickel‑chromium alloy with grades such as Cr20Ni80 and Cr30Ni70, and is recorded under HS 7403.29. Monel wire, composed of a nickel‑copper alloy (approximately 63 % Ni and 28‑34 % Cu), is classified under HS 7505.22. These classifications guide customs procedures and indicate typical duty rates for alloy wire imports. Buyers can expect the products to be supplied in coil or spooled form suitable for further processing.

Product Range and Specialties of Jozo Electric Wire

Jozo Electric Wire’s catalogue features molybdenum wire, which in the industry is commonly supplied in diameters from 0.1 mm to 5 mm and purity levels of 99.5 % or higher for aerospace and nuclear applications. Nickel wire offerings generally meet IEC 60228 Class 2 or Class 5 specifications, with tensile strengths between 800 MPa and 1 200 MPa and typical annealed or hardened conditions. Titanium wire products are frequently delivered with ASTM G1‑04 compliance, offering corrosion resistance and tensile strengths of 600 - 1 200 MPa depending on grade. The nichrome wires listed include standard grades Cr20Ni80, Cr30Ni70, Cr15Ni60, GH1140, Cr20Ni35 and Cr20Ni30 that are used for heating elements and have a typical resistivity of 1.0 - 1.5 Ω·mm²/m. Monel 400 wire, identified by its nickel‑copper composition, is widely used in marine and chemical environments and usually conforms to ASTM B466, providing a typical tensile strength of 550 MPa and excellent corrosion resistance. Industry practice packages these wires in cardboard rolls, wooden crates or steel drums, with moisture content controlled below 0.5 % to preserve alloy integrity.

Trade and Export Information - Jozo Electric Wire

China is a global exporter of non‑ferrous alloy wires, and shipments from manufacturers such as Jozo Electric Wire are routinely directed to Europe, North America and Southeast Asia. The HS 7403.29 classification for nichrome wire places it in the “other copper alloy wire” chapter, which commonly requires conformity to IEC 60228 and, where applicable, RoHS restrictions on hazardous substances. The HS 7505.22 code for monel wire falls under “other nickel alloy wire,” where buyers often request ISO 9001 quality management certification and material test reports meeting ASTM B466. Importers typically arrange freight under FOB or CIF terms, using 20‑ft or 40‑ft containers that can hold up to 20 tons of coiled wire, with pallets or bulk packs to prevent deformation. Chinese export regulations mandate that metal wires are not subject to phytosanitary certification, but customs may request a commercial invoice, packing list and a declaration of alloy composition. Seasonal demand peaks align with automotive production cycles in Q2 - Q3 and with construction material orders in Q4.

Sourcing from Jozo Electric Wire - Buyer Guidance

Prospective buyers should request a mill test certificate (MTC) that details exact alloy composition, tensile strength, elongation and dimensional tolerances for each wire grade. For nichrome and monel wires, compliance with IEC 60228 (class rating) and ASTM standards (G1‑04 for titanium, B466 for monel) should be verified through third‑party test reports. Samples are commonly supplied in 1‑meter lengths or 10‑kg coils, allowing buyers to assess resistivity, hardness and surface finish before full‑scale orders. Typical minimum order quantities range from 500 kg for standard diameters up to 2 tonnes for specialty grades, with lead times of 30 - 45 days after receipt of a confirmed purchase order. Packaging should be inspected for moisture barriers and proper labeling of alloy grade, HS code and net weight to facilitate customs clearance.

What alloy grades are available for the nichrome wire?

Jozo Electric Wire lists nichrome grades Cr20Ni80, Cr30Ni70, Cr15Ni60, GH1140, Cr20Ni35 and Cr20Ni30, each falling under HS 7403.29 and commonly used for heating elements with resistivity around 1.1 Ω·mm²/m.

Which international standards apply to the titanium wire?

Titanium wire from this supplier is typically produced to meet ASTM G1‑04 specifications, which define chemical composition, tensile strength (600 - 1 200 MPa) and corrosion‑resistance requirements for aerospace and medical applications.

How can I verify the composition of the monel wire?

Request a mill test certificate that cites the nickel‑copper ratio (approximately 63 % Ni, 28‑34 % Cu) and confirms compliance with ASTM B466; third‑party assay reports are also accepted for verification.

What are the usual packaging formats for these alloy wires?

The wires are generally delivered in cardboard rolls or wooden crates, stacked on pallets with moisture‑proof liners; larger shipments may be placed in steel drums for bulk handling.

What HS codes should I use when importing the listed products?

Nichrome wire is classified under HS 7403.29 (other copper alloy wire) and monel wire under HS 7505.22 (other nickel alloy wire); molybdenum, nickel and titanium wires fall within HS chapter 74 for non‑ferrous metal products, typically 7403 without further sub‑heading.

Are any certifications commonly required for these wire products?

Buyers often request ISO 9001 quality management certification, IEC 60228 class ratings for electrical conductors, and material test reports conforming to relevant ASTM standards; specific certifications should be confirmed with the supplier before order placement.

What is the typical lead time and minimum order quantity?

Standard lead times are 30 - 45 days after order confirmation, with minimum order quantities ranging from 500 kg for common diameters to 2 tonnes for specialized alloy grades.