About Jiangyin Bairuijia Plastics Science & Technology Co.,Ltd. - Industrial Tapes/Films Supplier in China

Jiangyin, China hosts Jiangyin Bairuijia Plastics Science & Technology Co.,Ltd., which currently lists 13 active products in its catalogue. The company’s focus is on polyolefin film products that are used for shrink‑wrapping, packaging and specialised industrial applications. The catalogue includes items such as POF Shrink Film, POF Fast Packaging Film, Cross Linked Shrink Film, Cross Linked Printed Film, and several anti‑fog, anti‑static and micro‑perforated variants. All of these products fall under the HS‑chapter 39 family for plastic films, reflecting the standard classification used for export of polymer film goods.

The product list demonstrates a breadth of film structures, ranging from standard shrink film to cross‑linked and hot‑slip grades. Each entry specifies a polyolefin base, commonly a blend of polyethylene and polypropylene, which provides the mechanical and thermal properties required for rapid shrinking and durability. The inclusion of anti‑fog and anti‑static treatments shows the supplier’s capability to meet niche performance criteria demanded by food‑packaging and electronics sectors.

Product Range and Specialties of Jiangyin Bairuijia Plastics Science & Technology Co.,Ltd.

The catalogue covers polyolefin (POF) shrink films in several technical configurations. Typical industry grades for such films include thicknesses from 12 µm to 150 µm, shrink temperature windows of 80 °C to 150 °C, and shrink ratios up to 2.5:1, with tensile strengths measured in the range of 15‑30 MPa. Anti‑static films are usually specified with surface resistivity above 10⁹ Ω, while anti‑fog formulations aim for light transmission greater than 90 % and cloud point below 5 °C. Buyers often request compliance with ASTM D1004 for shrink performance and ISO 527 for tensile testing, as well as food‑contact certifications such as FDA 21 CFR 177 for films destined for consumable packaging.

Trade and Export Information - Jiangyin Bairuijia Plastics Science & Technology Co.,Ltd.

China is one of the world’s largest exporters of polyolefin shrink films, supplying automotive, consumer‑goods and food‑packaging manufacturers across the European Union, North America and Southeast Asia. The relevant HS‑code families are 3919.30 (self‑adhesive plastic film) and 3919.90 (other plastic film), which are routinely inspected by customs for compliance with REACH and, where applicable, FDA food‑contact standards. Export shipments are typically packed on 76 mm cores, placed in cardboard boxes, and loaded into 20‑ft or 40‑ft containers; a 20‑ft container can accommodate roughly 10‑12 tons of 30 µm film. Common Incoterms used by Chinese film exporters include FOB Shanghai and CIF Los Angeles, with buyers frequently requesting certificates of origin and material safety data sheets at the point of shipment.

Sourcing from Jiangyin Bairuijia Plastics Science & Technology Co.,Ltd. - Buyer Guidance

Prospective buyers should request a detailed product data sheet that lists thickness, shrink temperature range, shrink ratio, tensile strength (MPa), clarity (% light transmission), anti‑static surface resistivity and any food‑contact compliance statements. Sample provision is usually on a 1 m roll or a 10 kg coil, allowing verification of optical and mechanical properties before bulk purchase. Verify that the supplier can supply test reports aligned with ASTM D1004 (shrink performance), ISO 527 (tensile), and a REACH‑compliant safety data sheet; these documents are standard checkpoints for quality assurance.

What types of shrink film does Jiangyin Bairuijia offer?

The supplier lists 13 polyolefin film products, including standard POF Shrink Film, fast‑packaging film, cross‑linked shrink and printed films, as well as anti‑fog, anti‑static, micro‑perforated and low‑temperature shrink variants.

Are the films suitable for food‑packaging applications?

The catalogue does not state specific food‑contact certification, so buyers should request FDA 21 CFR 177 compliance documentation and a REACH safety data sheet before using the films for consumable goods.

What are the typical thickness and shrink temperature ranges for these films?

Industry practice for polyolefin shrink films ranges from 12 µm to 150 µm in thickness, with shrink temperature windows between 80 °C and 150 °C, which aligns with the technical capabilities of the listed products.

Which HS codes are applicable to these products?

Polyolefin shrink films are generally classified under HS chapter 39, most commonly HS 3919.30 for self‑adhesive film and HS 3919.90 for other plastic films, depending on the specific film construction.

What certifications should a buyer request from the supplier?

Buyers typically ask for ISO 9001 quality‑management certification, ISO 14001 environmental compliance, REACH registration, and any specific food‑contact or medical‑device certifications relevant to the intended end‑use.

What is the usual minimum order quantity and lead time?

For bulk polyolefin film grades, suppliers often set a minimum order of about 5 tons per grade, with a production lead time of 30‑45 days after order confirmation.

How are the films packaged for export?

Films are wound on 76 mm cores, placed in reinforced cardboard boxes, and palletised for loading into 20‑ft or 40‑ft containers; container capacity is roughly 10‑12 tons of 30 µm film.

Which Incoterms does the supplier typically use?

Common Incoterms for Chinese film exporters include FOB Shanghai for buyer‑arranged main carriage, and CIF Los Angeles when the supplier arranges freight and insurance to the destination port.