About I2cure - Cosmetics & Beauty Products Supplier in India

I2cure is based in India and lists 26 active products. The catalogue spans cosmetics & beauty, hand sanitizer, dental equipment, agriculture sprayers, soap dispensers, and body deodorants. Core offerings are molecular iodine (I2) solutions formulated for oral, ocular, respiratory and skin applications. Products are classified under HS code families 3304.99, 3306.90, 3307.90, 3307.30, 3004.90 and 3808.94. The supplier also provides hardware such as an electric cordless nano sprayer and an automatic stainless‑steel dispenser. All listed items are presented in liquid volumes ranging from 20 ml to 200 ml.

Examples include I2 Gargle 30 ml (HS 3306.90) and I2 Eye Bath 30 ml (HS 3307.90), both molecular iodine antiseptic solutions. I2 Pure Air 50 ml is coded 3808.94 and contains iodine for respiratory use. I2 Dry Bath 100 ml and 50 ml are recorded under HS 3304.99 with cosmetic‑grade carriers. The foot deodorizer 50 ml carries HS 3307.30 and is an aqueous iodine solution. Additional items such as I2 BioShield lotion (HS 3004.90) and dental aerosol additive (HS 3004.90) extend the range into medical‑grade formulations. Several products, including the nano sprayer and dispenser, are listed without HS codes but serve as delivery equipment for the iodine solutions.

Product Range and Specialties of I2cure

The iodine‑based line includes gargles, eye washes, nasal sprays, foot deodorizers, acne lotions and BioShield lotions, each formulated as aqueous solutions. In the cosmetics sector, iodine concentrations typically range from 0.1 % to 0.5 % w/v and meet cosmetic‑grade purity of at least 99 %. For oral and ocular products, pharmaceutical‑grade specifications require sterility, endotoxin levels below 0.5 EU/ml and pH between 5.5 and 7.5. The HS 3004.90 items are classified as medicated preparations for skin and are often packaged in single‑use sachets of 20 ml or 50 ml. The HS 3304.99 skin‑care lotions and dry baths are usually supplied in PET bottles with tamper‑evident caps, meeting ISO 22716 cosmetic manufacturing standards. The sprayer equipment follows typical agricultural‑sprayer parameters such as nozzle flow rates of 0.2 - 0.5 l/min and compatibility with standard 20 ml to 200 ml containers.

Standard packaging for the liquid products includes 20 ml, 30 ml, 50 ml, 100 ml and 200 ml bottles, allowing a 20‑ft container to hold approximately 12 000 units of 50 ml bottles. Sachet formats for BioShield lotion are often boxed in cartons of 240 units, facilitating bulk handling for institutional buyers. The electric cordless nano sprayer is a battery‑operated unit designed for precise dosing of iodine solutions in agricultural or sanitation settings. The stainless‑steel automatic dispenser provides contact‑less dispensing for high‑traffic environments, aligning with hygiene standards in public facilities. All liquid products are sealed to comply with ISPM 15 regulations for wood‑based packaging when applicable. Material safety data sheets (MSDS) accompany each product to outline handling and storage requirements.

Trade and Export Information - I2cure

India is a major exporter of iodine‑based antiseptic preparations, with shipments commonly destined for the Middle East, Africa, the European Union and North America. Buyers in hospitality, healthcare and agricultural sectors typically import HS 3306, 3307 and 3808 goods under CIF or FOB terms. Regulatory requirements often include an ISO 9001 quality management system, GMP certification for pharmaceutical‑grade items, and CE marking for equipment such as sprayers. Customs authorities frequently request a Certificate of Origin, a detailed invoice and a Certificate of Analysis that confirms iodine concentration and purity. For HS 3004.90 medical preparations, FDA registration or EU MDR compliance may be required depending on the destination market. Export logistics favor PET or HDPE containers packed in cardboard cartons, with moisture‑resistant liners to meet ISPM 15 when wooden pallets are used.

HS chapter 33 covers cosmetic and toiletry preparations, while chapter 30 includes pharmaceutical preparations, both of which are subject to health authority checks at import. Freight forwarders often advise a 20‑ft container capacity of roughly 1.5 tonnes for the 50 ml bottle range, translating to about 30 days transit from Indian ports to the Gulf region. Temperature‑controlled shipping is not mandatory for iodine solutions but storage below 30 °C is recommended to preserve stability. Importers should verify that the supplier provides a batch‑specific COA and that the packaging complies with the destination country’s labeling regulations, such as ingredient listing and hazard symbols. In cases where the sprayer equipment is classified under HS 8424, additional conformity assessment may be required. Indian export incentives for medical and hygiene products can reduce duties for qualifying buyers under certain trade agreements.

Sourcing from I2cure - Buyer Guidance

Prospective buyers should request a current Certificate of Analysis for each iodine solution, confirming concentration (e.g., 0.2 % w/v), purity (>99 %) and microbiological limits per USP <61>. For eye and oral care products, a sterility test report and endotoxin assay are standard prerequisites. Documentation of GMP compliance, ISO 9001 certification and, where applicable, FDA or EU registration should be obtained before placing an order. Verify that the packaging material meets ISO 22716 for cosmetics or ISO 13485 for medical devices, depending on the product category. Request a sample batch to assess visual clarity, odor and pH, which are critical quality attributes for iodine solutions. Confirm that the supplier can provide MSDS and proper labeling in the language required by the importing country.

Typical minimum order quantities range from 5 000 to 10 000 units for liquid products, with larger batches required for sachet boxes of 240 units. Lead times reported by similar Indian manufacturers are 30‑45 days from order confirmation to shipment, subject to raw material availability. Shipping is usually arranged on a 20 ft or 40 ft container basis, with PET bottles loaded in cardboard trays to prevent breakage. Buyers should specify Incoterms such as FOB Mumbai or CIF Dubai to align with their logistics strategy. Upon receipt, importers must inspect the COA, packaging integrity and perform a random batch test to ensure compliance with the agreed specifications. Any deviation in iodine concentration or sterility should trigger a non‑conformance review with the supplier.

What categories of iodine‑based products does I2cure list?

I2cure lists oral gargles, eye baths, nasal and respiratory sprays, skin lotions, foot deodorizers and related antiseptic liquids. The range also includes hardware such as a cordless nano sprayer and an automatic stainless‑steel dispenser for dispensing the solutions.

Which HS codes are assigned to the oral and ocular solutions?

The I2 Gargle 30 ml is classified under HS 3306.90, while the I2 Eye Bath 30 ml and I2 Intimate Wash 50 ml fall under HS 3307.90. Products like the foot deodorizer use HS 3307.30 and skin‑care lotions are recorded under HS 3304.99.

What certifications are typically required for iodine antiseptic preparations?

Buyers normally request ISO 9001 for quality management, GMP certification for pharmaceutical‑grade items and, where relevant, FDA registration or CE marking for medical devices. A Certificate of Analysis confirming iodine concentration and purity is also standard.

What are the usual concentration and purity specifications for molecular iodine solutions?

Commercial iodine solutions are commonly formulated at 0.1 % to 0.5 % w/v with a purity of 99 % or higher. For medical or cosmetic applications, the concentration must be clearly stated on the COA and meet the relevant pharmacopeial limits.

What packaging formats are standard for the 20‑100 ml iodine products?

The products are typically supplied in PET or HDPE bottles equipped with tamper‑evident caps. Single‑use sachets of 20 ml or 50 ml are also used for lotions, usually packed in cartons of 240 units.

What is the typical MOQ and lead time for the I2 BioShield lotion?

Minimum order quantities are usually around 5 000 units for liquid formats, with larger cartons required for sachet packaging. Lead times are generally 30‑45 days from order confirmation to shipment, depending on raw material availability.

Which regions most often import Indian iodine‑based antiseptics?

Exporters from India commonly supply the Middle East, African markets, the European Union and North America. Buyers in hospitality, healthcare and agricultural sectors are the primary importers of these HS 33 and HS 30 categories.