About IÌ?z Metal Kalip - Fire Extinguishers & Products Supplier in Turkey

Turkey‑based IÌ?z Metal Kalip lists eleven active products across fire protection and construction equipment spare parts. The catalogue groups items under Fire Extinguishers & Products, Construction Equipment Spare Parts, Construction Equipment & Machinery, and Irrigation Machinery, Equipments & Spare Parts. Product entries include IZ 412 Sprinkler Guard 1/2", IZ 434 Sprinkler Guard 3/4" (HS 8424.89), Recessed Escutcheons Part IZ 100 1/2" (HS 8302.41) and 3/4" (HS 8302.49), as well as several fire hose variants up to 50 m. All metal components are described as carbon steel St‑37 (S235JR / A283 Grade C) sheet metal of 0.6 mm thickness. The fire hose items are presented without HS codes but are clearly part of the fire protection product line.

Product Range and Specialties of IÌ?z Metal Kalip

The listed catalogue covers sprinkler guards in 1/2" and 3/4" sizes, recessed and mounted escutcheons for sprinkler connections, and three fire‑hose configurations: tubeless sheet‑metal door hose, decorative design hose 25 m long, and a foam‑system hose of the same length, plus a mobile fire‑hose carriage of 50 m. Materials are carbon steel St‑37 sheet for the metal parts and reinforced rubber or woven fabric for the hoses, with standard dimensions such as 25 mm nominal diameter for the 25 m hoses. In the fire‑protection industry, sprinkler guards are typically manufactured to NFPA 13 and DIN 1695 specifications, with corrosion‑resistant coatings for outdoor use. Fire hoses exported from Turkey often meet ISO 6182 pressure‑test standards (12 bar working pressure) and are classified under HS 8424 for fire‑extinguishing equipment. Buyers usually request hoses with a minimum burst pressure of 30 bar and a fire‑resistance rating of at least 30 minutes.

Trade and Export Information - IÌ?z Metal Kalip

Turkey is a recognized exporter of fire‑protection hardware, supplying the EU, Middle‑East, and North‑African markets where construction safety regulations drive demand. The metal escutcheons fall under HS 8302 (other articles of iron or steel) and the sprinkler guards under HS 8424.89, both of which are subject to customs inspections for material composition and CE conformity. Importers commonly require CE marking, ISO 9001 quality‑management certification, and test reports that verify compliance with NFPA 1961 for hose performance. Shipping of metal parts usually uses 20‑ft containers with wooden crates, while fire hoses are packed in steel drums or reinforced pallets to protect the coils during transit. Typical Incoterms are FOB or CIF, with buyers arranging pre‑shipment inspections by third‑party agencies to confirm material grade and dimensional tolerances.

Sourcing from IÌ?z Metal Kalip - Buyer Guidance

When sourcing from IÌ?z Metal Kalip, request a material test certificate confirming the St‑37 (S235JR) composition and the 0.6 mm sheet thickness for all metal components. For fire hoses, ask for a hydraulic test report, ISO 6182 compliance documentation, and a CE declaration of conformity that specifies pressure rating and fire‑resistance duration. Verify the HS code classification on the commercial invoice to ensure correct duty treatment and confirm that the product description matches the catalogue entry. It is advisable to order a sample batch - typically 500 units for metal parts or one 25 m hose coil - to evaluate weld quality, coating adherence, and dimensional accuracy before committing to larger volumes.

Which HS codes apply to the sprinkler guards and escutcheons offered by IÌ?z Metal Kalip?

Sprinkler guards such as IZ 434 are classified under HS 8424.89, which covers fire‑extinguishing equipment. Recessed escutcheons use HS 8302.41 for the 1/2" size and HS 8302.49 for the 3/4" size, both belonging to the broader HS 8302 category for other iron or steel articles.

What material is used for the metal components in the catalogue?

All listed metal parts are manufactured from carbon steel St‑37 (equivalent to S235JR or A283 Grade C). The sheet metal thickness is specified as 0.6 mm, providing a balance between strength and ease of forming for sprinkler fittings.

What are the standard dimensions and pressure ratings for the fire hoses?

The fire hoses are supplied in 25 m and 50 m lengths with a nominal internal diameter of 25 mm. They are tested to a working pressure of 12 bar and a burst pressure of at least 30 bar, in line with ISO 6182 requirements for firefighting hoses.

Which certifications should a buyer request for these fire‑protection products?

Buyers should request CE marking documentation, ISO 9001 quality‑management certificates, and test reports that demonstrate compliance with NFPA 1961 for hose performance and NFPA 13 for sprinkler accessories. These documents confirm material grade, pressure resistance, and fire‑safety standards.

How are the products packaged for export?

Metal escutcheons and sprinkler guards are typically packed in wooden crates with individual protective padding to prevent deformation. Fire hoses are coiled, banded, and placed in reinforced steel drums or on palletized wooden frames to safeguard the hose integrity during container handling.

What are the typical minimum order quantities and lead times?

For metal components, the usual minimum order quantity is 500 units per item, while fire hoses can be ordered in single coil increments (one 25 m or 50 m coil). Lead times after order confirmation generally range from four to six weeks, depending on production scheduling and export documentation preparation.

What documentation is needed for customs clearance of these items?

Customs authorities typically require a commercial invoice listing the correct HS code, a packing list, the CE declaration of conformity, and any material test certificates for the steel components. For hoses, an additional hydraulic test report may be requested to verify compliance with safety standards.

Can buyers request sample testing before a full order?

Yes, buyers can request a sample batch - commonly 500 units for the metal parts or one hose coil - to conduct dimensional checks, material composition analysis, and functional testing such as pressure hold and fire‑resistance verification before placing a larger purchase.