About Hebei Huaqiang Mesh Co., Ltd - Agriculture Supplier in China

Hebei Huaqiang Mesh Co., Ltd is based in Hebei province, China and currently lists eight active products. All items fall under the agriculture segment and are specialised textile and woven fabrics used in processing and handling of agricultural and industrial materials. The catalogue includes sludge dewatering belt, polyester spiral belt with fillers, plain weaving fabrics, linear screen, polyester forming fabrics, pulp washing fabrics, polyester weaving dryer fabrics, and a double‑facer corrugator belt for BHS machines. These products are identified by their functional descriptions rather than a single HS code family, but they belong to the broader HS Chapter 63 for textile articles. The supplier’s product portfolio therefore targets equipment manufacturers and processing plants that require durable fabric components.

The listed fabrics are primarily polyester‑based, a material widely used for its chemical resistance, dimensional stability, and ease of cleaning. In Chinese textile export practice, such fabrics are typically supplied in rolls ranging from 10 m to 150 m in length, with widths between 0.5 m and 2.5 m and a basis weight from 80 g/m² to 300 g/m² depending on the application. The double‑facer corrugator belt is engineered for high‑temperature drying cycles, while the sludge dewatering belt is designed for moisture removal in wastewater treatment linked to agricultural processing. The product set reflects a focus on mechanical strength and compatibility with industrial drying, screening, and washing equipment.

Product Range and Specialties of Hebei Huaqiang Mesh Co., Ltd

The catalogue’s eight items can be grouped into three functional families: dewatering and drying belts, woven forming and washing fabrics, and specialty screening or corrugating belts. Polyester spiral belts with fillers commonly incorporate calcium carbonate or talc to increase stiffness and reduce cost, with typical denier of 1500‑3000 and tensile strength above 40 MPa. Plain weaving fabrics and polyester forming fabrics are usually supplied in plain or twill weaves, with warp/weft densities ranging from 30 to 80 ends/cm and a burst strength of 200‑400 kPa.

Industry standards for such textiles include ISO 105‑C06 for colour fastness, ISO 13934‑1 for tensile properties, and ASTM D5034 for breaking force. Buyers often request Oeko‑Tex Standard 100 certification to confirm the absence of harmful substances, especially when the fabrics contact food‑grade agricultural products. The double‑facer corrugator belt for BHS machines typically requires a heat‑resistant coating with a minimum service temperature of 200 °C.

Trade and Export Information - Hebei Huaqiang Mesh Co., Ltd

China is a major exporter of industrial textile fabrics, and products from Hebei province are routinely shipped to Southeast Asia, the Middle East, East Africa, and Europe. The HS Chapter 63 code range (e.g., 6305 for other woven fabrics) is applied to most of the listed items, and customs authorities often request a product description, material composition, and any relevant safety data sheets. Common buyer requirements include ISO 9001 quality‑management certification and compliance with REACH for chemical safety.

Typical logistics involve packing the fabric rolls on wooden pallets, securing them with stretch film, and loading them into 20‑foot or 40‑foot containers. Exporters frequently use FOB or CIF terms, with the buyer arranging inland transport after port discharge. Inspection agencies such as SGS or Bureau Veritas may be engaged for pre‑shipment verification of dimensions, weight, and material conformity.

Sourcing from Hebei Huaqiang Mesh Co., Ltd - Buyer Guidance

Prospective buyers should request a detailed technical data sheet that lists fibre type, denier, weave pattern, tensile strength, elongation at break, and any filler percentages. Samples of at least 2 m² per fabric type are advisable to assess compatibility with processing equipment and to perform laboratory tests for moisture resistance and chemical durability.

Before placing an order, verify that the supplier can provide ISO 9001 certification and, if required by the importing country, Oeko‑Tex or REACH compliance documents. Minimum order quantities are typically expressed in total roll length, often 500 m per colour or specification, with lead times ranging from four to six weeks after order confirmation. Clarify packaging details, such as whether rolls will be shrink‑wrapped and labelled with HS code, weight, and dimensions.

What types of fabrics does Hebei Huaqiang Mesh offer for agricultural processing?

The supplier lists eight fabric products, including sludge dewatering belts, polyester spiral belts with fillers, plain weaving fabrics, linear screens, polyester forming fabrics, pulp washing fabrics, polyester weaving dryer fabrics, and a double‑facer corrugator belt for BHS machines. All are polyester‑based textiles designed for moisture removal, drying, screening or washing applications in agricultural processing.

Are the polyester belts reinforced with any fillers?

Yes, the catalogue mentions polyester spiral belts with fillers. In this category, fillers such as calcium carbonate or talc are commonly used to increase stiffness and reduce material cost, typically at 5‑15 % by weight.

Which certifications should I ask for when purchasing these fabrics?

Buyers should request ISO 9001 certification for the supplier’s quality‑management system. Additional certifications often required for textile fabrics include Oeko‑Tex Standard 100 for harmful‑substance testing and REACH compliance for chemical safety, depending on the destination market.

What are the typical dimensions and weight of the fabric rolls?

Industrial fabric rolls are usually supplied in lengths from 10 m up to 150 m, widths between 0.5 m and 2.5 m, and a basis weight ranging from 80 g/m² to 300 g/m². The exact specifications vary by product type and can be confirmed in the technical data sheet.

What is the usual lead time and minimum order quantity?

Lead times for these textile products are generally four to six weeks after order confirmation, allowing time for material preparation and quality inspection. Minimum order quantities are commonly expressed in total roll length, often around 500 m per colour or specification.

How are the products packaged for shipment?

Fabric rolls are typically shrink‑wrapped, stacked on wooden pallets, and secured with stretch film. The pallets are then loaded into 20‑foot or 40‑foot containers, with each pallet labelled with HS code, net weight, and dimensions.

Which HS codes are applicable to these textile fabrics?

The fabrics fall under HS Chapter 63 for textile articles, with common sub‑headings such as 6305 00 for other woven fabrics and 6307 10 for other made‑up textile articles. Exact codes depend on the specific product configuration and should be verified with the supplier’s export documentation.