About Harbin Dragon Wind Power Technolgy Co., Ltd - Wind Turbines Supplier in China

Harbin Dragon Wind Power Technolgy Co., Ltd is based in China and lists five active products in its catalogue. The product set consists of wind‑driven generators ranging from 500 W to 30 kW, including a 10 kW wind power machine, a 20 kW aerogenerator, a 30 kW wind‑driven generator, a 500 W fan‑driven generator, and another 20 kW wind‑driven generator. Each item is recorded under the broader categories of Agriculture and Turbines, reflecting applications in small‑scale power generation for farms or remote sites. No HS codes are supplied for these items, so the description remains focused on the power ratings and generator types. The catalogue does not contain additional technical parameters such as blade length or hub height.

The five listed models cover a power spectrum that matches typical micro‑turbine classifications used in off‑grid or supplemental energy projects. The 500 W fan‑driven unit is comparable to portable wind generators, while the 10 kW to 30 kW units align with small commercial or community installations. All products are presented without explicit certification claims, indicating that buyers should verify compliance with industry standards independently. The supplier’s classification as an imported tier with a harbor trust tier suggests participation in cross‑border trade channels. The focus on turbine‑type equipment positions the company within the niche of low‑ to medium‑capacity wind energy solutions.

Product Range and Specialties of Harbin Dragon Wind Power Technolgy Co., Ltd

The catalogue offers five wind‑generator models: a 10 kW wind power machine, a 20 kW aerogenerator, a 30 kW wind‑driven generator, a 500 W fan‑driven generator, and a second 20 kW wind‑driven generator. In the wind‑turbine market, such capacities are classified as micro‑ (up to 100 kW) or small‑scale turbines, often used for agricultural sites, remote villages, or auxiliary power in industrial complexes. Industry specifications for these classes typically reference IEC 61400‑2 for small wind turbines, with design wind speeds around 5 - 7 m s⁻¹, cut‑in speeds near 3 m s⁻¹, and cut‑out speeds of 25 m s⁻¹. Common performance metrics include power curves, annual energy production (AEP) estimates, and noise levels measured in dB(A). Materials for blades are usually fiberglass‑reinforced polyester or carbon‑fiber composites, and generators are often permanent‑magnet synchronous types.

Trade and Export Information - Harbin Dragon Wind Power Technolgy Co., Ltd

Chinese manufacturers of low‑capacity wind turbines frequently ship to Southeast Asia, South Asia, Africa, and Latin America, where distributed renewable energy projects are expanding. The HS chapter 84 group, particularly heading 8411 (wind‑turbine generators), is the standard tariff classification for these units. Importers typically request ISO 9001 quality‑management certification and IEC 61400 compliance documentation, and many destination markets require CE marking or UL listing for safety and grid‑connection approval. Export logistics for 10 kW to 30 kW machines usually involve 20‑foot containers with wooden crates, securing the generator and any control electronics; the smaller 500 W unit can be shipped in bulk or as part of a mixed load. Common Incoterms used by Chinese suppliers are FOB Harbin or CIF destination ports such as Shanghai, Hong Kong, or Dubai, reflecting the established maritime routes for renewable‑energy equipment.

Sourcing from Harbin Dragon Wind Power Technolgy Co., Ltd - Buyer Guidance

Buyers should request the latest IEC 61400‑2 test report, a performance curve for the specific rated power, and any available type‑approval certificates before placing an order. Verify the generator’s voltage and frequency specifications match the target grid (e.g., 230 V 50 Hz or 120 V 60 Hz) and confirm the presence of standard safety features such as over‑speed shutdown and fault protection. Request detailed mechanical drawings that show blade dimensions, hub height, and mounting interface, as these affect site installation and foundation design. Because the supplier does not list certifications, ask for copies of ISO 9001 and any CE or UL declarations to ensure compliance with the importing country’s regulatory framework. Sampling policies for wind generators are limited, but a functional demo unit or on‑site testing arrangement can provide practical verification of power output and noise levels.

What power ratings are available from Harbin Dragon Wind Power Technolgy Co., Ltd?

The supplier lists five models with rated outputs of 500 W, 10 kW, 20 kW (two separate models), and 30 kW.

Which HS code is used for these wind generators?

Wind‑turbine generators of this size are generally classified under HS heading 8411, which covers wind‑powered electric machines.

What certifications should a buyer request for these turbines?

Buyers should ask for IEC 61400‑2 test reports, ISO 9001 quality‑management certificates, and any CE or UL type‑approval documents relevant to the destination market.

How are the turbines typically packaged for export?

Units are usually crated in wooden boxes with cushioning, placed inside 20‑foot containers; the 500 W model can be shipped in bulk or combined with other equipment.

Which regions import low‑capacity wind turbines from China?

Typical import regions include Southeast Asia, South Asia, Africa, and Latin America, where distributed renewable‑energy projects are common.

What documentation is needed for customs clearance?

A commercial invoice, packing list, certificate of origin, IEC test report, and any required safety or conformity certificates are standard for customs processing.

What is the typical lead time for a 20 kW aerogenerator?

Lead times for small‑scale turbines from Chinese manufacturers generally range from 30 to 60 days after order confirmation, depending on production scheduling and shipping terms.

Are spare parts supplied with the turbines?

Suppliers usually offer a separate spare‑parts catalog; buyers should inquire about blade kits, bearings, and controller modules to ensure long‑term maintenance.