About Hamil Metal Int.Co - Titanium Products Supplier in China

Hamil Metal Int.Co is registered in China and currently lists nine distinct titanium product entries. The catalogue covers tubes and pipes, rods of various cross‑sections, sheets and plates, foil/strip, bolts and nuts, dental rods and screws. Each entry is associated with HS chapter 81, specifically codes 8108.20 for certain sheet and tube items and 8108.90 for the majority of rods, plates and fasteners. The material descriptions include commercially pure titanium (Grade 2), the Ti‑6Al‑4V alloy (Grade 5) and other alloy grades such as GR1, GR2, GR4, GR5, GR7, GR9, GR11, GR12. The supplier’s active product count of nine indicates a focused portfolio within the broader titanium market.

The titanium tube & pipe entry cites HS code 8108.90 and lists alloy families GR1‑GR12, reflecting the common practice of exporting alloy‑specific tubes under this code. Hex and square rod items are recorded under HS 8108.20 and 8108.90 respectively, with material grades limited to Grade 2 and Grade 5 (Ti‑6Al‑4V). Sheet and plate products also fall under HS 8108.20, matching international customs classifications for flat‑rolled titanium. Fasteners such as bolts, nuts, and screws are grouped under HS 8108.90, the standard code for miscellaneous titanium articles. The dental rod entry specifies Grade 5 and Grade 23 ELI, which are the grades typically required for biomedical implants.

Product Range and Specialties of Hamil Metal Int.Co

The catalogue comprises titanium tube & pipe, hex rod, square rod, sheet & plate, rod, foil & strip, bolts & nuts, dental rod and screws. All items are classified under HS 8108.20 or 8108.90 and are described in terms of commercially pure titanium (Grade 2) and Ti‑6Al‑4V alloy (Grade 5), with additional alloy designations (GR1‑GR12) for the tube product. In the titanium market, Grade 2 CP titanium is valued for its corrosion resistance and is commonly supplied in thicknesses from 0.5 mm to 6 mm for sheet and foil. Grade 5 Ti‑6Al‑4V is the most widely used aerospace alloy, typically offered in rod diameters from 6 mm to 50 mm and tube wall thicknesses from 1 mm to 5 mm. Fasteners are usually produced to ASTM B265 specifications, with thread standards conforming to ISO 965 or ASME B18.6.5 for bolts and nuts.

Trade and Export Information - Hamil Metal Int.Co

China is a major exporter of titanium alloys, and shipments classified under HS 8108.20/8108.90 are routinely shipped to aerospace hubs in North America, Europe and the Asia‑Pacific, as well as to medical device manufacturers in the United States and Japan. Buyers often require compliance with ASTM B265 for sheet and plate, ASTM B348 for bars and rods, and AMS‑4919 for aerospace‑grade Ti‑6Al‑4V. Commonly requested certifications include ISO 9001 quality management, ISO 14001 environmental management and material test reports confirming chemical composition and mechanical properties such as tensile strength (≈ 900 MPa for Grade 5) and elongation (≈ 14 %). Export logistics from China typically involve 20‑ft or 40‑ft containers with internal bracing to prevent deformation, and Incoterms such as FOB Shanghai or CIF Hong Kong are frequently used. Import regulations in the EU and the US may require additional documentation like a Certificate of Origin and compliance with REACH or ITAR for aerospace applications.

Sourcing from Hamil Metal Int.Co - Buyer Guidance

When sourcing titanium from this supplier, request a full material test report that includes ASTM or ISO grade verification, chemical analysis (e.g., Al 6 % and V 4 % for Ti‑6Al‑4V) and mechanical test data such as yield strength and elongation. Ask for copies of any ISO 9001 or ISO 14001 certificates the supplier holds, and verify that the product dimensions, tolerances and surface finish meet the specifications required for your end‑use (e.g., ±0.1 mm for rods, surface roughness Ra ≤ 0.8 µm for sheets). Confirm packaging details - typically wooden crates with anti‑corrosion wraps or bulk bags for foil - and ensure the shipment plan aligns with your preferred Incoterm and lead‑time expectations.

What titanium product categories does Hamil Metal Int.Co list?

The supplier lists tube & pipe, hex rod, square rod, sheet & plate, rod, foil & strip, bolts & nuts, dental rod and screws, all under HS 8108.20 or 8108.90.

Which grades of titanium are mentioned in the catalogue?

Materials include commercially pure titanium Grade 2, Ti‑6Al‑4V Grade 5, and a range of alloy grades GR1, GR2, GR4, GR5, GR7, GR9, GR11, GR12 for the tube product.

What HS codes are associated with these products?

Tube & pipe, square rod, rod, foil/strip, bolts & nuts, dental rod and screws use HS 8108.90; hex rod and sheet & plate use HS 8108.20.

What certifications should a buyer request for titanium imports?

Buyers should request ISO 9001 and ISO 14001 certificates, material test reports conforming to ASTM B265 (sheet), ASTM B348 (bars/rods) and, for aerospace, AMS‑4919 compliance.

What typical mechanical properties are expected for Grade 5 Ti‑6Al‑4V?

Grade 5 Ti‑6Al‑4V commonly exhibits a tensile strength of about 900 MPa, yield strength around 830 MPa and elongation of roughly 14 % at room temperature.

What are common minimum order quantities and lead times for these titanium items?

Minimum order quantities vary by product shape, often starting at 5 kg for foil and 10 kg for rods; lead times are typically 15‑30 days after receipt of a confirmed purchase order and required test documentation.

How are the products packaged for export?

Exports are usually packed in wooden crates with internal bracing for rods and tubes, while sheets and plates are wrapped in anti‑corrosion film; foil and strip may be placed in bulk bags with moisture‑absorbing liners.

Which regions most frequently import Chinese titanium products?

Key import regions include North America (USA, Canada), Europe (Germany, UK, France), and the Asia‑Pacific (Japan, South Korea, Australia), especially for aerospace, medical and chemical processing applications.