About Gulfax Group - Petroleum By Products Supplier in United Arab Emirates

The United Arab Emirates, positioned in the Middle East, hosts Gulfax Group which currently lists 18 active products across six main categories. Its catalogue spans petroleum by‑products such as various chafing and lamp fuels, a range of soaps and detergents, paints and coatings, construction and waterproofing chemicals, methanol, and grinding wheel items. The supplier’s product list includes Gel Chafing Fuel, Wick Chafing Fuel, Lamp Oil (Tikki Torch Fuel), Pumice Soap, Liquid Wax Cartridges, Marble Crystallizer/Polish (HS 3824.99), Brass/Metal Polish, Copper Polish Paste, Heavy Duty Hand Soap with Pumice Powder, Marble Polishing Liquid, Liquid Chafing Fuel, Bamboo Torch Fuel (Paraffin), Chaffer Fuel, Chaffing Fuel Bulk, Floor Pads, Aloe Vera Bath Soap, Herbal Bath Soap, and Natural Bath Soap. Each item is recorded under the relevant HS‑code family where available, for example the Marble Crystallizer falls under chapter 38 chemical preparations. The remaining items are classified under their respective HS chapters for fuels, soaps and cleaning agents, and metal polishing compounds.

Gulfax Group’s offerings reflect the typical product specifications found in the regional chemical trade. Chafing fuels are generally kerosene‑based liquids with flash points above 38 °C and conform to ASTM F24 standards for portable fuel. Soap products such as Pumice Soap and Heavy Duty Hand Soap commonly contain 5 - 10 % pumice powder and meet ISO 9001 quality management requirements for detergent composition. Polishing compounds like Marble Crystallizer use calcium fluoride and oxalic acid blends, which are standard in stone care formulations and are regulated under HS chapter 38. The supplier’s portfolio therefore aligns with the material grades and safety data sheets (SDS) typically demanded by industrial buyers. All listed items are suitable for bulk shipment in 20 ft or 40 ft containers, drums, or bulk tankers depending on the product form.

Product Range and Specialties of Gulfax Group

The catalogue’s petroleum by‑product line includes multiple chafing and torch fuels, which in global trade are usually classified under HS 2710 (petroleum oils and oils obtained from bituminous minerals) or HS 2712 (diesel‑type fuels). Buyers often require a flash point of at least 38 °C, a sulphur content below 0.5 % by weight, and compliance with ASTM F24 or EN 590 for liquid fuels. Soap and detergent items such as Pumice Soap and Heavy Duty Hand Soap typically fall under HS 3401 and are produced with a pH range of 7 - 9, containing 5 - 15 % surfactant blends; REACH registration and ISO 9001 certification are common prerequisites. Paints, coatings, and construction chemicals - though not detailed in the product list - generally belong to HS 3208 (paints and varnishes) and must meet VOC limits of 150 g m⁻³ for EU markets. The Marble Crystallizer/Polish (HS 3824.99) exemplifies a chemical preparation used in stone care, where purity of calcium fluoride above 95 % and oxalic acid concentration around 10 % are standard specifications. Grinding wheel products, when present, are classified under HS 8205 and are evaluated by grit size (e.g., 80 - 200 µm) and bond type.

Trade and Export Information - Gulfax Group

The United Arab Emirates is a major re‑export hub for petroleum‑derived chemicals, with the majority of shipments destined for the Middle East, North Africa, South Asia, and select European markets. Products such as chafing fuel and lamp oil are typically exported in 20 ft drums or bulk containers, adhering to ISPM 15 treatment for wooden pallets and complying with the International Maritime Dangerous Goods (IMDG) code for flammable liquids. Soap and detergent exports from the UAE often require compliance with GCC standards and may be accompanied by a Certificate of Origin and an MSDS. The Marble Crystallizer falls under HS 3824.99, a sub‑heading for other chemical preparations, and is subject to customs inspections for hazardous content, with buyers frequently requesting a REACH compliance statement and a third‑party lab analysis confirming calcium fluoride purity. Common certifications sought by importers include ISO 9001 for quality management, ISO 14001 for environmental management, and where applicable, the Gulf Conformity (GCC) mark for consumer chemical products.

Sourcing from Gulfax Group - Buyer Guidance

When sourcing chafing or torch fuels from Gulfax Group, buyers should request a current Safety Data Sheet, a flash‑point test report, and confirmation of compliance with ASTM F24 or EN 590 specifications. For soap and detergent items, a sample batch with pH measurement, surfactant concentration analysis, and a REACH registration excerpt should be reviewed before finalizing the order. The Marble Crystallizer/Polish requires a Certificate of Analysis detailing calcium fluoride purity, oxalic acid percentage, and a heavy‑metal test result to ensure compliance with HS 3824 regulations. Verify packaging details such as drum size (200 L) or bulk tanker capacity (10 m³) and confirm that the shipment will be labeled according to IMDG and UN number 1950 for flammable liquids. It is advisable to establish a trial order of at least one 20 ft container to assess consistency of product quality and documentation.

What types of chafing fuel are listed in Gulfax Group’s catalogue?

Gulfax Group lists Gel Chafing Fuel, Wick Chafing Fuel, Liquid Chafing Fuel, Chaffer Fuel, and Chaffing Fuel Bulk, all of which are liquid fuels typically based on kerosene or para‑paraffinic blends and classified under HS 2710.

Which product in the catalogue includes a specific HS code?

The Marble Crystallizer / Polish is the only item with an HS code provided, listed as 3824.99, which covers other chemical preparations containing calcium fluoride and oxalic acid.

What documentation is normally required for the soap products such as Pumice Soap or Heavy Duty Hand Soap?

Importers usually request a Safety Data Sheet, a Certificate of Analysis showing surfactant content and pH, and proof of REACH registration or GCC conformity for cosmetic‑type soaps.

Are there any metal polishing products in the range, and what are their typical specifications?

Yes, Gulfax Group offers Brass / Metal Polish and Copper Polish Paste; these are abrasive pastes formulated with fine metal oxides, commonly graded by particle size (e.g., 0.5 - 2 µm) and supplied in 5 kg tins or 200 L drums.

What are the standard packaging formats for the fuel products?

Chafing and torch fuels are generally packed in 20 ft or 40 ft containers using 200 L steel drums, with labeling that meets IMDG Code requirements for flammable liquids (UN number 1950).

Which certifications should a buyer verify before purchasing the Marble Crystallizer?

Buyers should ask for an ISO 9001 quality certificate, a REACH compliance statement, and a lab‑tested Certificate of Analysis confirming calcium fluoride purity above 95 % and oxalic acid concentration around 10 %.

What is the typical lead time for bulk orders of the listed products?

Lead times for bulk shipments from the UAE usually range from 3 to 6 weeks, depending on product availability, required documentation, and container loading schedules.