About Guangzhou Rongtao Medical Technology Co., Ltd - Other Medical Equipments Supplier in China

Guangzhou, China is the location of Guangzhou Rongtao Medical Technology Co., Ltd, which presently lists 31 active repair and maintenance items in its catalogue. The company’s inventory focuses on replacement and repair components for diagnostic ultrasound systems, including mainboards, CPU boards, beam‑former boards, high‑voltage boards, power supplies and transducer assemblies for brands such as Aloka, Toshiba, Philips, Esaote and Bisound. Each entry is identified by a specific part number (e.g., Ep525601ff, Ep555501aa) that matches the original equipment manufacturer designation. The catalogue also includes endovaginal and linear ultrasound transducers, which are critical for image acquisition in clinical settings.

The product list is organized around electronic sub‑assemblies and acoustic transducers used in medical imaging equipment. Items such as the Aloka Alpha series CPU boards, Toshiba Aplio Tx/Rx boards and Philips Hd series power supplies are typical of the high‑frequency, low‑noise circuitry required in therapeutic and diagnostic ultrasound devices. The transducer items, for example the Toshiba Pvt‑661vt 10 mm endovaginal probe and the Toshiba Plt‑805at linear probe, are classified under ultrasonic acoustic devices and are subject to precise mechanical and electrical tolerances. The catalogue therefore spans both electronic and material components that support the functional integrity of modern ultrasound platforms.

Product Range and Specialties of Guangzhou Rongtao Medical Technology Co., Ltd

The listed catalogue comprises repair boards, power modules and transducer assemblies that are standard replacement parts for commercial ultrasound scanners. In the broader industry, such components are manufactured to IEC 60601‑1 safety standards for medical electrical equipment, and the electronic boards typically conform to surface‑mount technology (SMT) specifications with component density measured in mm² and solder joint reliability tested under temperature cycling. Ultrasound transducers are graded by frequency range (e.g., 3‑12 MHz for abdominal imaging, 7‑15 MHz for endovaginal use) and are evaluated for piezoelectric material composition, bandwidth and focal depth. Buyers commonly request data sheets that list impedance, capacitance, and acoustic output parameters such as pulse‑repetition frequency and axial resolution.

Trade and Export Information - Guangzhou Rongtao Medical Technology Co., Ltd

China is a major exporter of medical device spare parts, and products like electronic boards and ultrasound probes are classified under HS Chapter 90 (medical instruments) and Chapter 85 (electrical machinery). Typical import destinations include Europe, North America and Southeast Asia, where hospitals and service companies source OEM‑compatible replacement parts to extend the service life of imaging equipment. Export shipments are usually packed in anti‑static foam or moisture‑controlled containers, with 20‑ft or 40‑ft containers handling 1,000‑2,000 individual units depending on packaging density. Buyers often require CE marking, FDA 510(k) clearance or ISO 13485 certification documentation to demonstrate conformity with regulatory standards, even though the supplier’s own certifications are not listed. Common Incoterms for these shipments are FOB Guangzhou Port or CIF major hub ports such as Shanghai or Ningbo, aligning with standard logistics practices for medical electronics.

The Chinese export environment for medical spare parts emphasizes traceability; manufacturers provide serial numbers, batch codes and test reports that align with the International Electrotechnical Commission (IEC) and the International Organization for Standardization (ISO). Customs authorities frequently inspect HS‑code declarations and may request conformity certificates for electrical safety and electromagnetic compatibility (EMC) before clearance.

Sourcing from Guangzhou Rongtao Medical Technology Co., Ltd - Buyer Guidance

When sourcing from Guangzhou Rongtao Medical Technology Co., Ltd, buyers should request the part’s full technical data sheet, including schematic diagrams, component list (Bill of Materials) and any applicable IEC or ISO test reports. Verification of the original equipment manufacturer (OEM) part number against the supplier’s listing helps ensure compatibility with specific ultrasound models such as Aloka Alpha 6, Toshiba Aplio 500 or Philips Hd 15. Buyers are advised to ask for a sample unit or a functional test report before placing a bulk order, especially for transducer assemblies where acoustic performance is critical. Documentation to request includes CE declaration of conformity, any available ISO 13485 quality system certificates, and a statement of compliance with IEC 60601‑1 for electrical safety.

What types of repair components does Guangzhou Rongtao Medical Technology list?

The catalogue includes 31 items such as CPU boards, beam‑former boards, high‑voltage boards, power supplies and ultrasound transducers for brands like Aloka, Toshiba, Philips, Esaote and Bisound.

Are the listed ultrasound transducers compatible with specific frequency ranges?

Yes, the transducers are specified by model (e.g., Toshiba Pvt‑661vt 10 mm endovaginal probe) and typically operate within the 3‑12 MHz or 7‑15 MHz bands used for abdominal and endovaginal imaging respectively.

Which HS codes apply to these medical spare parts?

Electronic boards and power supplies fall under HS Chapter 85 (e.g., 8542 for electronic integrated circuits), while ultrasonic transducers are classified under HS Chapter 90 (e.g., 9018 for medical ultrasonic devices).

What certifications should a buyer request for these items?

Buyers should request CE declaration of conformity, any ISO 13485 quality system certificates, and IEC 60601‑1 safety test reports that are standard for medical electrical equipment.

What is a typical minimum order quantity and lead time?

Lead times for repair boards and transducers usually range from 2 weeks to 6 weeks depending on stock availability, and minimum order quantities are often set at a single unit for prototype testing or 5‑10 units for bulk replacement.

How are the products packaged for export?

Items are packed in anti‑static foam or moisture‑controlled boxes, then palletized for 20‑ft or 40‑ft container loading, following standard medical electronics packaging guidelines.

Which regions commonly import these Chinese medical spare parts?

Europe, North America and Southeast Asian markets are the primary import destinations for Chinese‑made ultrasound spare parts and electronic repair modules.

How can a buyer verify part compatibility before purchase?

Buyers should compare the supplier’s part number (e.g., Ep525601ff) with the OEM’s service manual, request a functional test report, and confirm the device model series (e.g., Aloka Alpha 6) to ensure exact fit.