About Guangdong Jieyang Weisheng Hareware Tableware Factory - Agriculture Supplier in China

Based in Jieyang, Guangdong province, China, Guangdong Jieyang Weisheng Hareware Tableware Factory lists five active products. The catalogue falls under the platform’s Agriculture category, although the items are cutlery. The five items are a rice spoon, a stainless‑steel spoon, a tea spoon, a stainless‑steel fork and a combined fork‑and‑spoon set. Each product is recorded without a specific HS code in the supplied data, but they correspond to the cutlery families commonly classified under HS chapter 82. The supplier’s trust tier is “harbor”, indicating a moderate level of platform verification.

The five listed products are simple metal tableware commonly used in household and food‑service settings. Typical material for such items is stainless steel, often grade 304 (18‑8) or 430, which aligns with food‑contact regulations in many import markets. The product names suggest single‑piece designs, which are usually packed in cardboard boxes of 500 to 1,000 units per carton. In international trade, these goods are generally classified under HS code 8215.00 for stainless‑steel cutlery.

Product Range and Specialties of Guangdong Jieyang Weisheng Hareware Tableware Factory

The catalogue comprises five cutlery pieces: a rice spoon, a stainless‑steel spoon, a tea spoon, a stainless‑steel fork and a combined fork‑and‑spoon set. In the tableware industry, stainless‑steel cutlery is typically produced from grade 304 (18‑8) for its corrosion resistance, or grade 430 for a magnetic variant, and finishes range from polished mirror to brushed. Standard dimensions for spoons are 150‑180 mm in length, while forks are usually 180‑200 mm, with tine spacing of 15‑20 mm. Buyers often request specifications such as tensile strength ≥ 515 MPa, hardness 150‑200 HB, and a maximum of 0.02 % carbon content.

Industry norms for stainless‑steel cutlery also include compliance with food‑contact standards such as FDA 21 CFR 184.1101 or EU Regulation No 1935/2004. Typical packaging involves bulk cartons (e.g., 500 pcs) placed on wooden pallets, allowing a 20‑ft container to hold approximately 30 000‑35 000 pieces depending on packaging density.

Trade and Export Information - Guangdong Jieyang Weisheng Hareware Tableware Factory

China is a leading exporter of stainless‑steel tableware, and products classified under HS 8215 are regularly shipped to North America, the European Union, and Southeast Asian markets. Importers usually require ISO 9001 quality‑management certification and, for food‑service applications, BRC or HACCP compliance. Standard Incoterms for these goods are FOB Shenzhen or CIF destination port, with cargo typically consolidated in 20‑ft or 40‑ft containers. Export logistics often involve protective inner cartons, outer corrugated boxes, and moisture‑resistant liners to prevent rust during transit.

Regulatory checks at the destination often focus on material composition (e.g., verification of 18‑8 stainless steel), surface finish, and presence of any prohibited coatings. Chinese exporters of cutlery frequently obtain SGS or Intertek inspection reports to satisfy buyer due diligence. The country’s maritime ports in Guangdong and Shanghai provide efficient loading for high‑volume container shipments of cutlery items.

Sourcing from Guangdong Jieyang Weisheng Hareware Tableware Factory - Buyer Guidance

When sourcing cutlery from this supplier, request a material test report confirming the stainless‑steel grade (e.g., 304/18‑8) and chemical composition, as well as a tensile strength test. Ask for a surface‑finish sample or photographic proof of the final polish level, and verify that the product complies with the relevant food‑contact regulations of the target market. Confirm whether the supplier holds ISO 9001 or similar quality‑management certificates; if not, obtain an independent third‑party inspection report before shipment.

Typical minimum order quantities for stainless‑steel spoons and forks range from 5 000 to 10 000 pieces per style, with lead times of 30‑45 days after sample approval. Verify packaging details - such as carton count per pallet and total units per container - to ensure alignment with your logistics plan. Request a pre‑shipment inspection report covering dimensions, weight, and finish consistency to reduce the risk of non‑conformance at customs.

What material are the spoons and forks supplied by Guangdong Jieyang Weisheng Hareware Tableware Factory made from?

The catalogue items are stainless‑steel cutlery, typically produced from grade 304 (18‑8) or grade 430, which are common food‑contact grades used worldwide.

Which HS code is applicable to the listed cutlery products?

Cutlery of stainless steel is generally classified under HS code 8215.00, which covers forks, spoons and other similar articles.

What certifications should a buyer request before purchasing these tableware items?

Buyers should request an ISO 9001 quality‑management certificate, a material test report confirming the stainless‑steel grade, and compliance documentation such as FDA food‑contact or EU Regulation 1935/2004 certification.

What are the typical packaging and container capacities for these products?

Items are usually packed in cardboard cartons of 500‑1 000 pieces, stacked on pallets. A standard 20‑ft container can hold roughly 30 000‑35 000 pieces, while a 40‑ft container can accommodate up to 60 000 pieces depending on pallet configuration.

What is a common lead time for an order of stainless‑steel spoons or forks?

Lead times are typically 30‑45 days after sample approval, assuming standard production runs and no customization beyond basic finishes.

Are there any standard quality tests buyers should verify for these cutlery items?

Buyers commonly verify tensile strength (≥ 515 MPa), hardness (150‑200 HB), and corrosion resistance through salt‑spray testing, as well as dimensional checks for length and tine spacing.

What Incoterms are usually used for shipping these cutlery products from China?

Exporters often use FOB Shenzhen or CIF to the buyer’s destination port, allowing the buyer to arrange main carriage and insurance as needed.

How can a buyer ensure the surface finish meets their requirements?

Request a physical sample or high‑resolution photographs of the finished product, and specify the desired finish (polished mirror, brushed, etc.) in the purchase order before production begins.