About Foundrychem International Development Co., Ltd. - Chemicals & Allied Products Supplier in China

Based in China, Foundrychem International Development Co., Ltd. currently lists six active chemical products across the categories of Chemicals & Allied Products, Agriculture and Cosmetic Chemicals. The catalogue includes two polymer‑based additives, three ester or carbonate solvents and one plasticizer, each identified with a specific HS‑code family such as 3905 for polymers, 2915 for organic solvents and 2918 for plasticizers. The supplier’s active product count of six reflects a focused portfolio rather than a broad commodity line, allowing buyers to evaluate each item individually. All listed items are described with their chemical formulae and, where available, minimum purity specifications, providing a clear baseline for technical assessment.

The product list comprises DN‑12 (Vinyl Acetate Copolymer‑Based Film‑Forming Additive, HS 3905.12), N‑Butyl Acetate (C6H14O2, HS 2915.33), Triacetin GTA (no HS code disclosed), Tributyl Citrate - TBC (C18H32O7, HS 2918.15), Propylene Carbonate (C4H6O3, HS 2920.90, ≥99.5 % purity) and Ethylene Carbonate (C3H6O3, HS 2918.19). The inclusion of both solvent‑type esters and carbonate electrolytes suggests capability to serve coatings, plasticizer, and battery electrolyte markets. Buyers can match these HS codes to customs documentation when arranging imports.

Product Range and Specialties of Foundrychem International Development Co., Ltd.

The catalogue offers a vinyl acetate copolymer additive (DN‑12) that is typically used as a film‑forming agent in PVC and water‑based coatings; industry grades often target a melt flow index of 5‑10 g/10 min and a solids content above 40 %. N‑Butyl Acetate is a common organic solvent for inks, lacquers and nail‑care products, with industrial grades usually specifying a boiling point of 126 °C and water content below 0.1 %. Tributyl Citrate serves as a non‑phthalate plasticizer for PVC and cellulose‑based films, where grades of 99 % purity and a flash point above 150 °C are standard. Propylene Carbonate and Ethylene Carbonate are high‑purity carbonate solvents widely employed in lithium‑ion battery electrolytes; typical specifications demand moisture content under 50 ppm and a dielectric constant above 60. Triacetin (glycerol triacetate) is often supplied as a plasticizer or food‑grade additive with purity levels of 99 % and a melting point near 35 °C. These typical grades provide a benchmark for buyers evaluating the supplier’s specifications.

Trade and Export Information - Foundrychem International Development Co., Ltd.

China remains one of the world’s largest exporters of specialty chemicals, with the majority of shipments routed through major ports such as Shanghai, Ningbo and Guangzhou. Products in HS chapters 29 and 39 are commonly transported in 20‑ft or 40‑ft containers, using intermediate bulk containers (IBCs) or drums for liquids, and sealed cartons for solid additives. Importers in Southeast Asia, Europe and North America frequently request REACH registration, an EU‑type safety data sheet (SDS) and a third‑party certificate of analysis (COA) for these chemical classes. Standard Incoterms for Chinese chemical exporters are FOB Shanghai or CIF Hong Kong, with compliance to the International Maritime Dangerous Goods (IMDG) code for any flammable or hazardous solvents. Buyers should also be aware of anti‑dumping duties that may apply to certain polyester‑based additives under HS 3905, and of the need for an import permit for carbonate solvents in jurisdictions with strict battery‑material regulations.

Sourcing from Foundrychem International Development Co., Ltd. - Buyer Guidance

When sourcing from Foundrychem, request an up‑to‑date SDS for each chemical, a COA confirming the stated purity (e.g., ≥99.5 % for Propylene Carbonate) and, where relevant, a REACH compliance statement. Verify that the HS code on the commercial invoice matches the catalogue entry - especially for items without a disclosed code such as Triacetin GTA, where you may need to confirm the appropriate HS 2915 or HS 2905 classification. Typical minimum order quantities for bulk solvents range from 500 kg to 1 ton, shipped in IBCs of 1 000 L or in 200 L drums, with lead times of 25‑40 days from order confirmation. Ensure that the supplier can provide batch‑level test reports for parameters like moisture content, flash point and boiling point, as these are standard acceptance criteria in the coatings and battery industries.

What is the HS code for DN‑12, the vinyl acetate copolymer additive?

The HS code listed for DN‑12 is 3905.12, which falls under the polymer and copolymer category.

Which purity level does Foundrychem specify for Propylene Carbonate?

The catalogue states a minimum purity of 99.5 % for Propylene Carbonate.

Is a safety data sheet (SDS) available for N‑Butyl Acetate?

Buyers should request the latest SDS from the supplier; it is standard practice for organic solvents such as N‑Butyl Acetate (HS 2915.33).

What typical packaging is used for the carbonate solvents listed?

Carbonate solvents like Propylene Carbonate and Ethylene Carbonate are usually packed in 200 L steel drums or 1 000 L IBCs for bulk shipments.

Which certifications are commonly required for the plasticizer Tributyl Citrate?

Importers often require REACH registration, a third‑party COA and an SDS confirming a purity of at least 99 % for plasticizers such as Tributyl Citrate (HS 2918.15).

What documentation should be verified before ordering Triacetin GTA?

Since Triacetin GTA has no HS code listed, buyers should confirm the correct HS classification, request an SDS, a COA showing ≥99 % purity, and any applicable export permits.

What Incoterms are typically used for chemical exports from China?

FOB Shanghai and CIF Hong Kong are the most common Incoterms used by Chinese chemical exporters, allowing buyers to arrange freight and insurance as needed.

Which regions most frequently import the chemicals offered by Foundrychem?

Key import markets include Southeast Asian countries, the European Union and North America, where the listed solvents and additives are used in coatings, cosmetics and battery manufacturing.