About Finore Minerals LLP - Other Ores & Minerals Supplier in India

India hosts Finore Minerals LLP, which currently lists seven mineral products in its catalogue. The company’s portfolio falls under the broader categories of Other Ores & Minerals, Clay, Quartz and Silica Sand. Its product line includes Potash Feldspar and Soda Feldspar (HS code 2529.10), Quartz (HS code 2506.10), Bentonite (HS code 2508.10), Silica Sand (HS code 2505.10), China Clay (HS code 2508.10) and Ball Clay (HS code 2508.40). Each entry specifies the chemical composition, such as potassium aluminosilicate for Potash Feldspar or smectite for Bentonite. The HS‑code families indicate that the items are classified under mineral ores, industrial minerals and ceramic raw materials.

The catalogue does not reference any certifications held by the supplier, so buyers should verify compliance with standard industry requirements. The listed minerals are commonly used in ceramics, glass manufacturing, foundry moulds, oil‑field drilling fluids and paper coating. The HS codes 2505‑2508 series are regularly inspected by customs and may require laboratory analysis certificates for purity, moisture and particle‑size distribution. Finore Minerals LLP’s product count of seven suggests a focused range rather than a broad diversified line.

Product Range and Specialties of Finore Minerals LLP

Finore Minerals LLP offers two feldspar grades: Potash Feldspar, a potassium aluminosilicate typically containing 10‑12 % K₂O and used in high‑temperature ceramics, and Soda Feldspar, a sodium aluminum silicate with around 12‑15 % Na₂O for glass and enamel formulations. Quartz is supplied as natural silicon dioxide, usually meeting a minimum 99.5 % SiO₂ purity for electronic and optical applications. Bentonite is presented as smectite clay, where the industry standard is a swelling index above 100 ml/100 g and a moisture content below 15 %. Silica sand is offered in grain sizes ranging from 0.2 mm to 1.0 mm, with common specifications of 99 % SiO₂ and low iron content for filtration and casting. China Clay (kaolin) and Ball Clay are both kaolinite‑based, with typical brightness (ISO 9276) above 90 % and plasticity suitable for porcelain and tile bodies. Buyers familiar with these mineral categories will recognize the listed HS codes (2529.10, 2506.10, 2508.10, 2505.10, 2508.40) as standard classifications for industrial mineral trade.

Trade and Export Information - Finore Minerals LLP

India is a major exporter of industrial minerals, and shipments of feldspar, quartz, bentonite and silica sand are routinely sent to Southeast Asia, the Middle East, Europe and North America. The HS‑code families 2505‑2508 are subject to customs verification that often requires a Certificate of Origin, a laboratory test report confirming chemical composition, and compliance with ISO 9001 quality management where applicable. Buyers typically request FOB or CIF terms, with bulk cargo loaded in 20‑ft or 40‑ft containers for powdered or granular forms, and in open‑top containers for bulk sand. Export documentation for these minerals may also include a Material Safety Data Sheet (MSDS) and, where required, a phytosanitary certificate for clay products to prevent contamination.

Sourcing from Finore Minerals LLP - Buyer Guidance

Prospective buyers should ask for a recent assay report that details chemical composition, purity percentages and moisture content for each mineral. For feldspar, a grain‑size distribution (e.g., 0‑45 µm) and loss on ignition test are standard verification steps. Bentonite and clay products usually require a swelling index test and plasticity chart, while silica sand buyers often request a sieve analysis and iron oxide content. Requesting an ISO‑9001 certificate, if held, and a copy of the MSDS will help confirm compliance with safety and quality standards. It is also advisable to verify the supplier’s export licence and confirm that the HS codes match the intended customs classification before placing an order.

What chemical specifications are available for Finore Minerals LLP’s Potash Feldspar?

The supplier lists Potash Feldspar as potassium aluminosilicate; buyers should request a test report showing K₂O content (typically 10‑12 %) and SiO₂ purity above 95 %.

How can I obtain a sample of the Quartz product?

Samples can be requested in small bulk (e.g., 5 kg) and should be accompanied by an analytical certificate confirming ≥99.5 % SiO₂ and the particle‑size distribution.

Which certifications are commonly required for Bentonite exports from India?

Exporters usually provide ISO‑9001 or ISO‑14001 certificates, an MSDS, and a laboratory analysis confirming swelling index and moisture content. Finore Minerals LLP does not list certifications, so buyers should request these documents directly.

What is the typical packaging for Silica Sand shipments?

Silica sand is generally packed in 20‑ft or 40‑ft containers using moisture‑proof liners, or in bulk bags of one ton for smaller volumes, with labeling that includes HS code 2505.10.

Are there minimum order quantities for China Clay?

Minimum order quantities for kaolin typically start at one metric ton, but the exact MOQ should be confirmed with the supplier based on shipping method and packaging.

What HS codes should I reference when importing Ball Clay from India?

Ball Clay from Finore Minerals LLP is classified under HS code 2508.40, which falls within the “Other clay products” chapter used for ceramic raw materials.

Which markets commonly import the mineral products listed by this supplier?

Buyers in the ceramics, glass, foundry, oil‑field and paper industries across Europe, the United States and Southeast Asia regularly import feldspar, quartz, bentonite, silica sand and kaolin from Indian exporters.

What documentation is needed for customs clearance of these minerals?

Standard documents include a commercial invoice, packing list, Certificate of Origin, laboratory test report for chemical composition, and, where applicable, an MSDS. The HS codes 2505‑2508 guide the required paperwork for customs authorities.