About Fera Iberica Peninsular - Steel Turning Scrap Supplier in Spain

Based in Spain, Fera Iberica Peninsular lists seven active products across metal and plastic scrap categories. The catalogue includes Steel Turning (HS 7204.50), Aluminum Briquettes (HS 7602.00), Electric Motor Scrap (HS 7404.00), Aluminum Foil Scrap (HS 7602.00), Mild Steel Scrap (HS 7204.29), PET Bottle waste, and Polystyrene (PS) material. These items fall under the top categories of Steel Turning Scrap, Aluminium Billets, Motor Scrap, Aluminium Scrap, Mild Steel Scrap, Plastic Scrap and Plastic Raw Materials as recorded. Each product is identified by its HS code family and material description as supplied.

The Steel Turning entry specifies carbon and alloy steel turnings of mixed grades, while the Aluminum Briquettes are produced from alloy 7045/7055. Electric Motor Scrap is described as copper windings of 99.9 % purity with steel or iron casings. Aluminum Foil Scrap is secondary aluminum foil, and Mild Steel Scrap is low‑alloy ferrous material with carbon content between 0.15 % and 0.25 %. The plastic segment lists PET bottle scrap and Polystyrene, for which no HS codes are provided in the catalogue.

Product Range and Specialties of Fera Iberica Peninsular

Steel Turning scrap (HS 7204.50) is commonly graded by carbon content and residual alloy elements, with buyers often requesting a maximum foreign material content of 2 % and particle size below 50 mm. Aluminium briquettes (HS 7602.00) are typically produced from 7000‑series alloys such as 7045 or 7055, with a standard density of 2.65 t/m³ and a minimum alloy purity of 95 %. Electric motor scrap (HS 7404.00) is valued for its high‑purity copper windings, usually certified to 99.9 % Cu and free of lead or other hazardous metals. Aluminium foil scrap also falls under HS 7602.00 and is graded by thickness (often 0.02 - 0.03 mm) and cleanliness, with buyers expecting less than 0.5 % non‑aluminium inclusions. Mild steel scrap (HS 7204.29) is assessed by carbon range (0.15 - 0.25 %) and tensile strength, with typical specifications of 250 - 350 MPa. PET bottle waste is processed into flakes or pellets, with standard melt flow index values of 15 - 25 g/10 min, while Polystyrene is measured by its density (≈1.05 g/cm³) and impact resistance.

Trade and Export Information - Fera Iberica Peninsular

Spain ranks among the EU’s top exporters of ferrous and non‑ferrous scrap, shipping most volumes to Turkey, Italy, the United Kingdom, the United Arab Emirates and China under HS chapters 72 and 76. Export shipments are usually packed in steel bales or bulk containers, with container sizes of 20 ft (≈18 t) or 40 ft (≈35 t) depending on material density. Buyers typically require ISO 9001 quality management certification, REACH registration for metal alloys, and compliance with the EU Waste Framework Directive, especially for mixed metal streams. Common Incoterms are FOB Spanish ports such as Algeciras or CIF to the buyer’s destination, and customs inspections often focus on HS code verification and material purity testing.

Sourcing from Fera Iberica Peninsular - Buyer Guidance

When sourcing from Fera Iberica Peninsular, buyers should request a recent mill test report or material analysis confirming carbon content for steel turnings and alloy composition for aluminium briquettes. For motor scrap, a copper purity certificate and a declaration of non‑hazardous coating are standard. Plastic scrap buyers normally ask for a REACH safety data sheet and a sample of PET flakes to verify melt flow index and colour consistency. It is advisable to confirm the exact HS code used for each shipment, request a pre‑shipment inspection report, and clarify packaging dimensions and weight to avoid freight discrepancies.

What metal scrap products does Fera Iberica Peninsular offer?

The supplier lists Steel Turning scrap, Aluminium Briquettes, Electric Motor Scrap, Aluminium Foil Scrap and Mild Steel Scrap, each identified with its respective HS code and material description.

Which HS codes are associated with the aluminium and steel scrap items?

Aluminium Briquettes and Aluminium Foil Scrap are recorded under HS 7602.00, while Steel Turning uses HS 7204.50 and Mild Steel Scrap uses HS 7204.29.

Are certifications such as ISO 9001 or REACH available for these products?

The facts do not specify any certifications held by the supplier. Buyers should request ISO 9001 or REACH compliance documents as part of their due‑diligence process.

What are typical minimum order quantities and container loading for the scrap metals?

Metal scrap is commonly shipped in steel bales or bulk containers; a 20‑foot container can hold roughly 18 tonnes and a 40‑foot container about 35 tonnes, depending on material density. Minimum order quantities are usually aligned with one full container load.

How is the quality of copper windings in the motor scrap verified?

Quality is verified through a copper purity certificate stating 99.9 % Cu content, often accompanied by an assay report that confirms the absence of lead or other prohibited elements.

What documentation is required for PET bottle and PS plastic shipments?

Standard documentation includes a REACH safety data sheet, a material test report showing melt flow index (for PET) or density (for PS), and a declaration of compliance with EU waste regulations.

Which shipping terms and ports are commonly used for exports from Spain?

Exports from Spain frequently use FOB terms from ports such as Algeciras, Valencia or Barcelona, with CIF as an alternative when the buyer prefers the supplier to arrange freight and insurance.