About Eroma Petrochemicals Pvt. Ltd. - Chemicals & Allied Products Supplier in India

India serves as the manufacturing base for Eroma Petrochemicals Pvt. Ltd., which currently lists six distinct chemical products in its catalogue. The listed items include EROMAX-70, EROMAX-80, EROMAX-90, EROSOL-100, EROSOL-150, and the solvent‑grade EROMOL-A. EROMOL-A is classified under HS code 2710.12 and is described as a hydrocarbon solvent or petroleum distillate equivalent to MTO. EROMAX-90 carries HS code 3402.42 and is identified as a non‑ionic surfactant based on an ethoxylated alcohol compound. The remaining products are named without specific HS codes in the supplied data.

EROMAX-70, -80 and the EROSOL series are positioned within the broader chemicals and allied products segment, which typically serves agricultural formulation and industrial cleaning markets. The catalogue therefore spans both solvent‑type hydrocarbons and surfactant chemistries, reflecting common product families used as diluents, carrier liquids, or emulsifying agents. While the exact specifications are not disclosed, the inclusion of HS codes indicates compliance with international customs classification. The product set suggests capability to supply bulk chemicals in standard bulk packaging such as 200 L drums or ISO tanks. No additional product details beyond the names and HS classifications are provided.

Product Range and Specialties of Eroma Petrochemicals Pvt. Ltd.

The catalogue’s hydrocarbon solvent, EROMOL‑A (HS 2710.12), falls into the petroleum distillate class commonly used as a diluent or carrier in agro‑chemical formulations. In the industry, such solvents are typically specified by boiling range (e.g., C9‑C12), flash point above 60 °C, aromatic content below 30 % by weight, and a moisture content under 0.1 %. Buyers usually request an ASTM D86 distillation curve, a flash‑point test (ASTM D93), and a material safety data sheet (MSDS) to confirm compliance.

EROMAX‑90 (HS 3402.42) is a non‑ionic surfactant based on ethoxylated alcohols, a class that generally exhibits an HLB value between 12 and 15, a cloud point above 30 °C, and a purity of 95 % or higher. Standard specifications include a defined ethoxylation number (e.g., EO‑9 to EO‑12), low sulfate content, and a viscosity of 10‑30 cP at 25 °C. Such surfactants are routinely supplied in 200 L drums, 1 m³ IBCs, or bulk tanker loads, and are often required to meet REACH registration and ISO 9001 quality management standards, though the supplier’s certifications are not listed.

Trade and Export Information - Eroma Petrochemicals Pvt. Ltd.

India is a major exporter of bulk chemicals, and products classified under HS 2710 and HS 3402 are routinely shipped to detergent manufacturers in the Middle East, agro‑chemical formulators in Southeast Asia, and specialty chemical processors in Europe. The hydrocarbon solvent segment (HS 2710) often requires compliance with REACH (EU) or EPA TSCA (US) registries, while non‑ionic surfactants (HS 3402) are commonly subject to ISO 9001 quality audits and may need to provide a Certificate of Analysis (CoA) and a REACH registration number.

Typical export shipments are packed in 200 L steel drums, 1 m³ IBCs, or bulk ISO tanks, loaded in 20‑foot or 40‑foot containers depending on volume. Standard Incoterms used by Indian chemical exporters include FOB Mumbai or CIF Dubai, with customs documentation covering the HS codes, commercial invoice, packing list, and, where required, a Material Safety Data Sheet. Export controls may involve the Directorate General of Foreign Trade (DGFT) licensing for certain solvent grades.

Sourcing from Eroma Petrochemicals Pvt. Ltd. - Buyer Guidance

Prospective buyers should request a current Material Safety Data Sheet and a Certificate of Analysis for each product, confirming parameters such as flash point, boiling range, HLB value, and purity. For EROMOL‑A, a distillation curve (ASTM D86) and a flash‑point test (ASTM D93) are standard, while EROMAX‑90 buyers usually ask for an HLB measurement, cloud‑point test, and viscosity data at 25 °C.

Because the supplier’s certifications are not disclosed, buyers are advised to confirm that the producer holds relevant quality system certificates (e.g., ISO 9001) and any required regulatory registrations (REACH, TSCA) before placing a bulk order. Minimum order quantities in the Indian market for bulk solvents typically start at 1 metric ton, with lead times of 3‑5 weeks after order confirmation, subject to production scheduling and export documentation.

What product categories does Eroma Petrochemicals offer?

The supplier lists six chemical products, including a hydrocarbon solvent (EROMOL‑A, HS 2710.12) and a non‑ionic surfactant (EROMAX‑90, HS 3402.42) alongside four other formulations identified as EROMAX‑70, EROMAX‑80, EROSOL‑100 and EROSOL‑150.

How can I obtain technical specifications for EROMOL‑A?

Request the latest Material Safety Data Sheet and a Certificate of Analysis, which should contain the ASTM D86 distillation range, flash‑point (ASTM D93), aromatic content, and moisture level.

What certifications are typically required for the surfactant EROMAX‑90?

Buyers usually ask for ISO 9001 quality system certification, a REACH registration number for the EU market, and a CoA showing HLB value, cloud point, purity and viscosity.

What are the common packaging options for these chemicals?

Bulk chemicals from India are commonly packed in 200 L steel drums, 1 m³ intermediate bulk containers, or ISO tank containers; the choice depends on order volume and the buyer’s preferred logistics.

Which Incoterms are most frequently used for shipments from India?

Exporters often quote FOB Mumbai or CIF Dubai, providing the commercial invoice, packing list, HS code declaration and the required MSDS with the shipment.

What is the typical minimum order quantity and lead time?

Minimum order quantities usually start at 1 metric ton for solvents and 0.5 metric ton for surfactants, with a production and documentation lead time of approximately 3‑5 weeks.

Which regions import these types of chemicals most often?

Hydrocarbon solvents and non‑ionic surfactants from India are commonly shipped to the Middle East, Southeast Asia, Europe and Africa for use in detergent formulation, agro‑chemical blends and specialty cleaning applications.