About Epes Lighting - Light Emitting Diode Supplier in China

China hosts Epes Lighting, which lists five active products under the Light Emitting Diode category. The catalogue contains a high power LED spotlight, a fin type LED bulb, a ceramic candle LED lamp, a globe LED lamp and an SMD T8 LED tube. Each item is classified within the LED lighting families that are normally recorded under HS Chapter 85, sub‑heading 85.60 for light‑emitting diodes. The supplier’s inventory therefore spans both point‑source luminaires and linear tube formats used in commercial and residential settings.

The five products cover a range of form factors: a spotlight for high‑intensity applications, a fin‑type bulb for retrofit fixtures, a ceramic candle lamp for decorative use, a globe lamp for ambient lighting and an SMD T8 tube for office or industrial lighting. All are electrically powered LED units that replace traditional incandescent or fluorescent sources, offering lower power consumption and longer service life. The listing reflects typical LED product categories exported from China, without additional claims about performance beyond the catalogue description.

Product Range and Specialties of Epes Lighting

Epes Lighting’s catalogue includes a high power LED spotlight, fin type LED bulb, ceramic candle LED lamp, globe LED lamp and SMD T8 LED tube. In the LED lighting market these products are commonly offered in wattage bands from 3 W to 50 W for bulbs and up to 150 W for spotlights, with luminous efficacies between 80‑130 lm/W. Typical specifications requested by buyers include colour temperature (2700‑6500 K), colour rendering index (CRI ≥ 80), and ingress protection ratings such as IP20 for indoor bulbs or IP65 for outdoor spotlights. Linear tubes such as the SMD T8 are usually supplied in lengths of 600 mm or 1200 mm, with a standard diameter of 26 mm and a power draw of 18‑36 W. Industry standards like IEC 60598 for luminaires and IEC 62471 for photobiological safety are frequently applied to these product types.

Trade and Export Information - Epes Lighting

China remains one of the largest exporters of LED lighting, with shipments primarily destined for Europe, North America and Southeast Asian markets. The products listed fall under HS 85.60, a code used for light‑emitting diodes and related components, which is subject to customs duties and import testing in many jurisdictions. Buyers typically require compliance with CE marking for EU entry, RoHS for hazardous substance restrictions, and UL or CSA listings for North American distribution. Export packaging often involves double‑wall cartons placed on standard 20‑ft or 40‑ft containers, and FOB terms from major Chinese ports are common practice. Chinese LED manufacturers also frequently hold ISO 9001 quality‑management certification, though confirmation should be obtained from the supplier.

Sourcing from Epes Lighting - Buyer Guidance

When sourcing from Epes Lighting, request detailed datasheets that include wattage, voltage, luminous flux, colour temperature, CRI, IP rating and thermal management information. Ask for third‑party test reports confirming CE, RoHS and any applicable UL or IEC certifications, as these are standard requirements for LED luminaires entering regulated markets. Verify the supplier’s production lead time, which for similar LED products is typically 30‑45 days after order confirmation, and confirm the minimum order quantity, often set at 500 units for individual lamp models. Review sample units for colour consistency, beam angle and thermal performance before committing to larger volumes.

What LED product types does Epes Lighting list?

The catalogue contains a high power LED spotlight, a fin type LED bulb, a ceramic candle LED lamp, a globe LED lamp and an SMD T8 LED tube, all classified under the Light Emitting Diode category.

Which HS code family applies to these LED items?

These products are normally recorded under HS Chapter 85, sub‑heading 85.60 for light‑emitting diodes and related lighting equipment.

What certifications should a buyer request for these LED lamps?

Buyers should request CE marking documentation for EU markets, RoHS compliance statements for hazardous substance limits, and UL or CSA test reports for North American distribution.

What typical specifications are important for the LED spotlight?

Key specifications include wattage (often 50‑150 W), luminous flux (up to 15 000 lm), colour temperature (2700‑5000 K), CRI ≥ 80 and an IP rating such as IP65 for outdoor use.

How are the LED tubes usually packaged for export?

SMD T8 LED tubes are commonly packed in sealed cartons with anti‑static liners, stacked on pallets for shipment in 20‑ft or 40‑ft containers under FOB terms.

What is a common minimum order quantity for these LED products?

Suppliers of similar LED lamps often set a minimum order quantity of around 500 units per model, though exact figures should be confirmed with the seller.

What lead time can a buyer expect for the LED bulb range?

Lead times for fin type LED bulbs and similar items are typically 30‑45 days after order confirmation, depending on production scheduling.

Are there standard test reports buyers should obtain for LED lighting?

Buyers usually ask for photometric test reports, thermal performance data, and compliance certificates such as IEC 60598 and IEC 62471 to verify safety and performance.