About ENSHINE SCIENTIFIC CORPORATION - Emergency shower and eyewash Supplier in Taiwan

ENSHINE SCIENTIFIC CORPORATION is based in Taiwan and currently lists six active products across safety and laboratory equipment. The catalogue includes emergency shower and eyewash stations, extraction arm systems, laboratory and cleanroom equipment, and air‑pollution control devices. Two of the listed items are assigned HS codes: emergency shower and eyewash under heading 9403.00 and a standard emergency shower & eyewash unit under heading 9024.89. Materials noted in the catalogue comprise stainless‑steel pipe, stainless‑steel 304, galvanized steel and ABS plastic components. The supplier’s product set targets environments that require rapid decontamination such as industrial labs and manufacturing facilities.

The product descriptions reference compliance with international safety standards including ANSI Z358.1, Taiwan’s CNS 14251 and Germany’s DIN 12899. Configurations mentioned span standard floor‑mounted units, wall‑recessed or mounted models, pedestal or counter‑mounted stations, as well as portable and self‑contained eyewash devices. Extraction arm systems are offered in pipe diameters of 2, 3, 4 and 6 inches with wall, ceiling or table mounting options. Although the facts do not specify certifications held, buyers of such safety equipment typically verify conformity to the cited standards before import.

Product Range and Specialties of ENSHINE SCIENTIFIC CORPORATION

ENSHINE SCIENTIFIC CORPORATION’s catalogue lists six specific items. The emergency shower and eyewash unit is classified under HS 9403.00 and constructed from stainless‑steel pipe. The standard emergency shower & eyewash model carries HS 9024.89 and combines stainless‑steel 304 or galvanized steel bodies with ABS‑plastic eyewash bowls. Additional offerings include a non‑pressurized self‑contained eyewash station, a 3‑inch wall‑mounted extraction‑arm hood, a mobile filtration system, and a repeat entry for a standard emergency shower and eyewash. In the broader industry, emergency‑decontamination stations are commonly produced in stainless‑steel grades 304 or 316 to resist corrosion, with flow rates of 20 gpm (≈75 L/min) for showers and a minimum eye‑wash flow of 0.4 gpm (≈1.5 L/min). ANSI Z358.1 specifies a 19‑second discharge duration and a water temperature range of 10‑35 °C. Extraction‑arm systems typically use pipe diameters from 2 in to 6 in, with ANSI‑ or ISO‑rated pressure ratings of 10 - 30 psi, and are often fabricated from the same stainless‑steel grades to ensure durability in clean‑room environments.

Trade and Export Information - ENSHINE SCIENTIFIC CORPORATION

Taiwan is a recognized exporter of laboratory safety and clean‑room equipment, with major destinations in North America, the European Union, and Southeast Asian manufacturing hubs. HS 9403.00 covers sanitary fixtures such as showers, while HS 9024.89 pertains to medical, surgical or dental instruments, both of which are subject to customs inspections for safety compliance. Importers generally request CE marking, ANSI Z358.1 certification, and, where applicable, ISO 9001 quality‑management documentation. Standard shipping practices involve packing units in wooden crates or bulk‑palletized loads, fitting 20‑ft or 40‑ft containers, and using Incoterms FOB or CIF to the buyer’s port. Taiwanese manufacturers often provide pre‑shipment inspection reports by SGS or Bureau Veritas to satisfy buyer‑driven due‑diligence.

Sourcing from ENSHINE SCIENTIFIC CORPORATION - Buyer Guidance

Prospective buyers should request product data sheets that detail material grade, flow rate, discharge duration, and compliance with ANSI Z358.1, CNS 14251 and DIN 12899. Test reports confirming stainless‑steel 304/316 composition and ABS‑plastic integrity are typical documents to verify. Because the catalogue does not list minimum order quantities, buyers should confirm MOQ, which for safety stations commonly starts at a single unit but may increase for bulk extraction‑arm kits. Lead times for custom‑configured units from Taiwanese suppliers generally range from eight to twelve weeks, depending on finish and certification requirements. Verify packaging dimensions and weight to calculate freight, and consider requesting a pre‑shipment inspection report to ensure the shipped goods match the agreed specifications.

What safety standards do the emergency shower and eyewash units comply with?

The units are designed to meet ANSI Z358.1, Taiwan CNS 14251 and German DIN 12899 standards for flow rate, discharge duration and material construction.

Which HS codes apply to the listed products?

The emergency shower and eyewash station is classified under HS 9403.00, and the standard emergency shower & eyewash unit is under HS 9024.89. Other items in the catalogue do not have HS codes provided.

What materials are used for the shower and eyewash components?

Materials specified include stainless‑steel pipe, stainless‑steel 304 (or galvanized steel) for the main body, and ABS plastic for the eyewash bowl.

Are certifications such as CE or ISO 9001 available for these products?

The facts do not state specific certifications held by the supplier; buyers should request CE marking, ISO 9001 or other relevant certificates as part of their due‑diligence process.

What are typical minimum order quantities and lead times?

For safety equipment like emergency showers, suppliers often accept orders starting at one unit, with lead times of approximately eight to twelve weeks for standard configurations.

How are the products packaged for export?

Export shipments are normally packed in wooden crates or bulk‑palletized loads suitable for 20‑ft or 40‑ft containers, with protective padding to prevent damage during transit.

Which regions commonly import Taiwanese emergency safety equipment?

Primary import markets include North America, the European Union and Southeast Asian manufacturing regions, where laboratories, factories and medical facilities require compliant decontamination stations.