About Echo Machinery - Agriculture Supplier in China

Echo Machinery is based in China and currently lists 11 distinct wear‑part items for crushing and grinding equipment. The catalogue covers impact‑crusher hammers, high‑chrome and high‑manganese blow bars, cone‑crusher mantles and concaves, and jaw‑crusher plates used in mining, recycling and aggregate production. Each entry specifies the equipment brand, such as Terex Pegson, Metso or Sandvik, and the type of wear component, showing a focus on replacement parts for primary crushers. The product titles indicate material grades such as high‑chrome (Cr26) and high‑manganese, which are standard for high‑impact wear resistance. The list does not include any additional corporate data beyond the active product count of 11.

The listed items fall under the HS‑code families for crusher wear parts, typically classified in chapter 84 (machinery) under headings 8465 or 8479. These headings cover spare parts for crushing machinery and are the common customs classification for such components. No further company details such as founding year, employee numbers or revenue are provided in the source data. The catalogue’s narrow focus suggests a specialization in wear‑parts rather than complete machinery. Buyers can therefore expect a product set that aligns with standard replacement‑part specifications for secondary‑ and primary‑stage crushers.

Product Range and Specialties of Echo Machinery

The catalogue includes impact‑crusher hammers for models such as Eagle and McCloskey i44, high‑chrome (Cr26) blow bars for Terex Pegson and Metso, and high‑manganese cone‑crusher mantles and concaves for Terex Finlay and Metso. In the crusher‑wear market, hammers are typically forged from high‑chrome alloy with a hardness of 58‑62 HRC and dimensions ranging from 300 mm to 600 mm in length. Blow bars are commonly supplied in grades Cr26 (high chrome) or high‑manganese, with a typical tensile strength above 1500 MPa and impact hardness of 60‑62 HRC. Cone‑crusher mantles and concaves are usually made from high‑manganese steel (Mn 45‑48) and designed to fit standard mantle sizes of 800 mm to 1300 mm diameter. Jaw‑crusher plates are generally fabricated from high‑chrome alloy and sized to match the specific jaw model’s wear‑area.

Industry practice adds that buyers often request material test certificates, hardness reports, and dimensional drawings for each wear part. Standard specifications such as ISO 9001 for manufacturing processes and CE marking for conformity are frequently required by importers in regulated markets. Suppliers may also provide wear‑life data expressed in operating hours under defined feed size and ore hardness conditions, which helps buyers compare performance across grades.

Trade and Export Information - Echo Machinery

China is one of the world’s largest exporters of crusher wear parts, supplying markets in Africa, the Middle East, South America and Southeast Asia. Export shipments are usually classified under HS chapter 84, heading 8465 (parts of machines for crushing, grinding or similar) or heading 8479 (parts not elsewhere specified). Major importing regions demand compliance with standards such as ISO 9001 for quality management and often require a CE declaration of conformity for equipment used in the European Union. Typical packaging involves steel‑framed wooden crates or bulk bagging for smaller items, with dimensions optimized for 20‑ft and 40‑ft containers. Incoterms most commonly used are FOB Shanghai or CIF destination port, allowing buyers to arrange inland transport and customs clearance.

Regulatory inspections in China include export‑quality checks by the Ministry of Commerce, and many buyers ask for third‑party laboratory reports confirming chemical composition and hardness. Shipping logistics frequently involve containerization; a standard 20‑ft container can hold approximately 12 tonnes of crusher wear parts, while a 40‑ft container accommodates up to 22 tonnes, depending on packaging density. Seasonal demand peaks often align with construction cycles in the importing regions, influencing lead‑time planning.

Sourcing from Echo Machinery - Buyer Guidance

When sourcing wear parts from Echo Machinery, buyers should request a material test certificate that specifies the exact alloy composition (e.g., Cr 26 % for high‑chrome bars) and hardness values measured by Rockwell or Vickers methods. Dimensional drawings or CAD files help verify that the mantle, concave or hammer will fit the specific crusher model listed in the catalogue. It is advisable to obtain a sample of the finished part, especially for high‑manganese mantles, to assess surface finish and tolerance compliance before committing to a full order. Buyers should also confirm that the supplier’s manufacturing process is covered by an ISO 9001 certificate or an equivalent quality‑management system, as this is a common requirement for importers in regulated markets.

Typical minimum order quantities range from a single blow bar to a full set of mantles for a crusher, with lead times of 15‑30 days after order confirmation, depending on stock availability and material grade. Packaging is usually in reinforced wooden crates with internal bracing to prevent impact damage during transit. Importers should ensure that the commercial invoice includes the correct HS code (8465 or 8479) and a clear description of the material grade to avoid customs delays.

What types of crusher wear parts does Echo Machinery list in its catalogue?

The catalogue lists impact‑crusher hammers, high‑chrome and high‑manganese blow bars, cone‑crusher mantles and concaves, and jaw‑crusher plates for brands such as Terex Pegson, Metso, Sandvik and McCloskey.

Are material specifications such as alloy grade and hardness provided?

The product titles indicate high‑chrome (Cr26) and high‑manganese grades, which are standard for wear resistance. Buyers should request a material test certificate confirming the exact alloy composition and hardness (typically 58‑62 HRC for Cr26).

Which HS codes are applicable to these wear parts?

Crusher wear parts are normally classified under HS chapter 84, heading 8465 (parts of machines for crushing, grinding) or heading 8479 (parts not elsewhere specified). The appropriate code depends on the specific component.

What certifications are commonly required for importing these parts?

Importers often require ISO 9001 certification for the supplier’s quality‑management system and, for EU destinations, a CE declaration of conformity. Material test certificates are also standard.

What is the typical minimum order quantity and lead time?

MOQ can be as low as a single blow bar or a single mantle, with lead times generally ranging from 15 to 30 days after order confirmation, subject to stock levels and material grade.

How are the parts packaged for export?

Wear parts are usually packed in reinforced wooden crates with internal bracing, or in bulk bags for smaller items, to protect against impact and corrosion during sea freight.

Which regions most frequently import crusher wear parts from China?

Key import markets include Africa, the Middle East, South America and Southeast Asia, where mining, construction and aggregate industries rely on these components.

What documentation should a buyer request before placing an order?

Buyers should ask for a material test certificate, hardness report, dimensional drawing or CAD file, the supplier’s ISO 9001 certificate, and a commercial invoice that lists the correct HS code and material grade.