About Displaybly (SZ) Technology Co., Limited - Touch Screen/LCD Monitors Supplier in China

Displaybly (SZ) Technology Co., Limited is based in China and currently lists five active products in its catalogue. The catalogue covers resistive touch screens, capacitive touch panels, monochrome OLED displays, COG LCD modules and LED backlight units. These items fall under the broader HS‑chapter 85 family that includes electronic display devices and light‑emitting components. Each product is classified within the supplier’s top categories of Touch Screen/LCD Monitors, Agriculture and Light Emitting Diode, reflecting a focus on electronic visual interfaces. The company’s trust tier is recorded as harbor, indicating a moderate level of verification within the platform.

Resistive touch screens in the listing are typically constructed with a polyester film overlay and support multi‑point operation up to five contacts. Capacitive panels are generally built on glass substrates with a transparent ITO electrode and meet optical transmittance levels above 85 % . The monochrome OLED offering is a single‑color emissive display often specified with contrast ratios exceeding 1 000 : 1 and low power consumption. Cog LCD modules combine the controller and driver circuitry directly on the glass, reducing module thickness to under 2 mm. LED backlights are supplied as arrays or edge‑lit units designed to deliver luminous flux in the range of 1 000 - 3 000 lumens per panel.

Product Range and Specialties of Displaybly (SZ) Technology Co., Limited

The product range includes resistive touch screens that are commonly offered in 3‑point and 5‑point configurations, with typical sizes from 5 in to 21 in and surface hardness of 2 H to 3 H. Capacitive touch panels usually meet IEC 60950 safety standards, provide response times under 10 ms and optical transmittance above 85 % across the visible spectrum. Monochrome OLED panels are graded by pixel pitch (often 0.5 mm to 1 mm), contrast ratio (usually ≥1 000 : 1) and power draw below 0.5 W per inch². COG LCD modules are supplied with integrated driver ICs, standard resolutions such as 1280×720 or 1920×1080, and panel thicknesses below 2 mm to suit slim‑device designs. LED backlights are classified by color temperature (typically 6 500 K), CRI values above 80 and luminous efficacy ranging from 80 to 120 lm/W.

Industry practice for these display components includes compliance with RoHS restriction of hazardous substances, CE marking for EU market entry, and often UL certification for North American shipments. Buyers frequently request test reports covering luminance uniformity, touch repeatability (for resistive and capacitive panels), and aging tests for OLED longevity. Standard packaging involves anti‑static bags, reinforced cardboard boxes and wooden pallets wrapped in stretch film to protect against electrostatic discharge and mechanical shock during sea freight.

Trade and Export Information - Displaybly (SZ) Technology Co., Limited

China is a leading exporter of electronic display components, with major outbound shipments to the United States, European Union, Southeast Asia and the Middle East. HS‑code 8528 covers monitors and panels, while HS‑code 8541 applies to light‑emitting diodes and related backlight assemblies, both of which are relevant to the supplier’s catalogue. Importers typically require CE, RoHS and, where applicable, FCC or UL certification to satisfy regulatory clearance in destination markets. Freight is commonly arranged on 40‑ft containers, with LED backlight units packed in bulk crates and touch screen panels stacked in insulated cartons to maintain flatness. Chinese export logistics for these goods often use FOB Shenzhen or CIF destination ports, with buyers coordinating customs brokerage to verify HS‑code declarations and compliance documentation.

Sourcing from Displaybly (SZ) Technology Co., Limited - Buyer Guidance

When sourcing resistive or capacitive touch panels, request a functional test report that includes touch accuracy, repeatability and environmental durability (e.g., temperature range - 20 °C to 70 °C). For OLED and LCD modules, obtain a datasheet specifying contrast ratio, luminance, viewing angle and power consumption, together with a sample for visual inspection. Verify that the supplier can provide CE and RoHS certificates; if shipments target North America, ask for UL or FCC test reports as applicable. Confirm packaging details such as anti‑static protection and pallet configuration to ensure safe handling during transit. Prior to order confirmation, ask for a production lead time estimate, which for these electronic components typically ranges from 30 to 60 days depending on order volume.

What types of touch screen technologies does Displaybly offer?

The catalogue lists resistive touch screens with multi‑point capability and capacitive touch panels built on glass with ITO electrodes.

Are OLED displays included in the product range?

Yes, a monochrome OLED panel is listed, commonly specified with high contrast ratios and low power consumption.

Which certifications should a buyer request for these electronic displays?

Buyers should request CE marking, RoHS compliance and, for North American markets, UL or FCC test reports where relevant.

What is the typical minimum order quantity for LED backlight units?

LED backlights are often sold in batches that fill a standard 40‑ft container; buyers usually negotiate MOQ based on container load, but a practical starting point is 200 units per order.

How are the products packaged for export?

Standard packaging includes anti‑static bags for panels, reinforced cardboard boxes, and wooden pallets wrapped in stretch film to protect against shock and static discharge.

What documentation is needed to clear customs for these items?

Customs generally require a commercial invoice, packing list, HS‑code declaration (e.g., 8528 for panels, 8541 for LEDs) and the relevant CE/RoHS certificates.

What lead times can buyers expect from Displaybly?

Typical production lead times for touch screens, OLED and LCD modules range from 30 to 60 days, depending on order size and any required customization.

Can samples be provided before a full order?

Yes, the supplier can arrange sample units for testing of touch accuracy, luminance and durability, allowing buyers to verify performance prior to larger orders.