About Dayal Solders - Lead Supplier in India

India is a major source of refined lead, and Dayal Solders lists five lead‑based items in its current catalogue. The active product count of five includes lead sheet, lead anode, lead coil, lead bricks and lead wire, each assigned to HS‑code families 7804.00 or 7801.91/7801.11 as shown in the supplier data. The catalogue specifies materials such as Lead Pb 99.9% Pure for sheets, Lead Alloy with 0.5 - 6 % antimony for anodes, Refined Lead Pb 99.99 % for coils, commercial‑grade lead for bricks and Primary Refined Lead Pb 99.97 % for wire. All entries fall under Chapter 78 of the HS system, which covers lead and lead alloys.

Dayal Solders’ product descriptions focus on purity levels and alloy composition rather than dimensions or packaging. The lead sheet is described as Pb 99.9 % pure, the anode as a Pb‑Sb alloy with a minimum of 99.9 % lead and 0.5 - 6 % antimony, and the coil as Pb 99.99 % refined. Bricks are offered at either 99.99 % or commercial‑grade 99.90 % lead, while the wire is listed as unalloyed primary refined lead at 99.97 % purity. These specifications align with typical industrial grades used for battery plates, radiation shielding and cable sheathing.

Product Range and Specialties of Dayal Solders

The catalogue covers five distinct lead formats: flat sheets, anode plates, continuous coils, rectangular bricks and round wire. In the broader market, lead sheets are commonly supplied in thicknesses from 0.5 mm to 6 mm and are graded by purity, with ICUMSA‑type standards not applicable but ISO 9001‑certified producers often offering 99.9 % or higher grades. Lead anodes for lead‑acid batteries typically contain antimony levels between 0.5 % and 6 % to improve hardness, matching the alloy range listed. Coils are usually wound on steel cores and sold in 20‑ft or 40‑ft containers, with purity of 99.99 % meeting the requirements for high‑efficiency battery manufacturing. Bricks are cut to standard dimensions (e.g., 200 mm × 100 mm × 50 mm) for radiation shielding, while wire is drawn to diameters from 1 mm to 10 mm and used for cable sheathing or welding electrodes.

Trade and Export Information - Dayal Solders

India ranks among the top global exporters of lead and lead alloys, shipping primarily to battery manufacturers in China, South Korea, the United States and Europe. HS‑code 7801 covers lead alloys and semi‑finished products, while HS‑code 7804 applies to lead sheets and wire, both subject to hazardous material regulations under the International Maritime Dangerous Goods (IMDG) Code. Importers generally request REACH registration for the material, an MSDS, and third‑party test reports (e.g., SGS or Bureau Veritas) confirming purity and alloy composition. Typical packaging includes steel drums of 200 kg, wooden crates for bricks, and bulk loading of sheets, coils and wire in 20‑ft or 40‑ft containers under FOB or CIF terms. Export documentation often includes a Certificate of Origin, a Commercial Invoice, a Packing List and, where required, a Phytosanitary or Hazardous Material declaration.

Buyers usually verify that the shipment complies with the destination country's environmental and safety standards, such as the EU RoHS directive for lead‑containing components or the U.S. EPA Lead‑Based Paint regulations. Freight forwarders handling lead must arrange for proper labeling, segregation from non‑hazardous cargo, and compliance with local customs valuation of hazardous goods.

Sourcing from Dayal Solders - Buyer Guidance

When sourcing lead from Dayal Solders, buyers should request a recent chemical analysis certificate that details the exact purity (e.g., 99.9 % Pb) and any alloying elements such as antimony. An up‑to‑date Material Safety Data Sheet (MSDS) is essential for handling, storage and transport compliance, especially under REACH and IMDG regulations. Buyers are advised to confirm the packaging format (steel drum, wooden crate, container load) and to obtain a pre‑shipment inspection report that includes dimensions, weight and any surface coating specifications. Typical minimum order quantities for bulk lead products range from 1 metric ton for sheets or wire up to 5 metric tons for coils, with lead times of 30 - 45 days after order confirmation, depending on production scheduling and export clearance.

What purity levels are offered for the lead sheet and lead wire?

The lead sheet is listed as Lead Pb 99.9 % pure, while the lead wire is described as Primary Refined Lead Pb 99.97 % unalloyed. Both grades meet the standard requirements for battery plate and cable sheathing applications.

Which HS codes apply to Dayal Solders’ lead products?

Lead sheet and lead wire use HS‑code 7804.00, lead anode and lead bricks use HS‑code 7801.91, and lead coil uses HS‑code 7801.11. These codes fall under Chapter 78 for lead and lead alloys.

What alloy composition is specified for the lead anode?

The anode material is a lead alloy with a minimum of 99.9 % lead and an antimony content ranging from 0.5 % to 6 %, a common formulation for battery‑type anodes.

What documentation should a buyer request before purchasing?

Buyers should ask for a chemical analysis certificate, an MSDS, a REACH registration statement (if required by the destination), and a third‑party inspection report confirming dimensions, weight and packaging.

What are the typical packaging methods for lead bricks and coils?

Lead bricks are usually packed in wooden crates or bulk bags, while coils are loaded on steel cores and shipped in 20‑ft or 40‑ft containers, often secured with steel straps to prevent movement.

Which markets commonly import Indian lead products?

Major importers include battery manufacturers in China and South Korea, automotive parts producers in Europe, and lead‑acid battery assemblers in the United States.

What certifications are commonly required for lead imports?

Importers typically require ISO 9001 quality management certification, REACH registration for the material, and an SGS or equivalent third‑party test report confirming purity and alloy composition.

What are the usual lead times and minimum order quantities?

Standard lead times are 30 - 45 days after order confirmation. Minimum order quantities are often 1 metric ton for sheet or wire and around 5 metric tons for coil shipments, though exact figures depend on the buyer’s specifications.