About Dalian Leading Metal Ltd. - Metal Casting Supplier in China

Dalian Leading Metal Ltd. operates out of China and currently offers 29 distinct product entries in its catalogue. The catalogue spans two primary categories, Agriculture and Clamps, and includes items such as agricultural machine parts, various clamp types, and cast iron components. Products listed include C Clamp, G Clamp, woodworking pipe clamps, high‑duty F clamps, and a range of cast‑metal parts like valve bodies and pump housings. The supplier also mentions high‑voltage power line hardware and scaffolding framework accessories. Each entry reflects the company’s focus on metal casting and machining.

Among the 29 listings, the G Clamp Maker is identified with HS code 8205.70, covering malleable cast iron, ductile iron and carbon steel materials. Other clamp products, such as C Clamp and woodworking pipe clamps, fall under the same general HS chapter for hand tools and metal fittings. The catalogue further includes cast parts for elevators, escalators, and agricultural machinery, as well as specialized items like spherical graphite iron components and cast iron grill pans. No additional HS codes are provided for the remaining items. The product set therefore combines standard metal hardware with niche casting applications.

Product Range and Specialties of Dalian Leading Metal Ltd.

The catalogue presents a mix of standard hardware and specialized cast components. Listed items include C Clamp, G Clamp (HS 8205.70), woodworking F and pipe clamps, high‑duty scaffolding accessories, agricultural machine parts, elevator‑escalator sheave diverters, cast pump bodies, valve bodies, and bespoke cast‑iron kitchenware such as grill pan grates. Materials cited are malleable cast iron, ductile iron and carbon steel, all typical for load‑bearing clamps and cast fittings.

In the metal‑hardware sector, clamps are commonly supplied in grades such as malleable iron 260, ductile iron 450, and carbon steel S235, with surface hardness ranging from 150‑200 HB. Standard G‑clamps under HS 8205.70 are often sized 100‑300 mm jaw width and rated for static loads of 1‑5 kN. Agricultural machine parts frequently use Q235 or Q345 steel plates, with tolerances of ±0.2 mm for critical dimensions. Cast valve bodies and pump housings are usually produced to ISO 9001 quality management standards, with dimensional accuracy of ±0.1 % and surface roughness Ra ≤ 1.6 µm.

Trade and Export Information - Dalian Leading Metal Ltd.

China is a major exporter of metal hardware, and products classified under HS chapter 82 (hand tools and general hardware) are regularly shipped to Southeast Asian, European and North American markets. The G Clamp (HS 8205.70) and related clamp products are subject to customs inspections that verify material composition, heat‑treatment records and compliance with IEC 60947‑1 for safety‑related hardware. Export shipments are typically packed in wooden crates or bulk‑loaded on 20‑ft or 40‑ft containers, with freight terms such as FOB Dalian or CIF destination ports.

Buyers commonly request ISO 9001 certification, CE Declaration of Conformity, and material test reports (MTR) that detail chemical composition and mechanical properties. Third‑party inspection agencies like SGS, Bureau Veritas or Intertek perform pre‑shipment verification for tensile strength, hardness and dimensional compliance. Chinese exporters of cast iron and steel hardware also adhere to the China Compulsory Certification (CCC) scheme for products that enter the EU or US markets, although the requirement depends on the end‑use application.

Sourcing from Dalian Leading Metal Ltd. - Buyer Guidance

When sourcing clamps or cast components from this supplier, request a detailed product data sheet that includes material grade, dimensional drawings, load rating and surface‑finish specifications. Obtain a material test report confirming compliance with the cited grades (e.g., malleable iron 260 or ductile iron 450) and, where applicable, a CE or CCC conformity certificate. For custom cast parts, ask for a prototype sample, a tooling or mold‑design drawing, and a quotation that specifies lead time and payment terms.

Typical minimum order quantities are 1,000 pcs for standard clamps and 500 kg for bulk cast components, though larger batches are common for agricultural machine parts. Lead times range from 30 days for standard inventory items to 45‑60 days for custom‑molded castings. Shipping is normally arranged in wooden pallets on 20‑ft containers, with the goods sealed in moisture‑resistant wrapping to prevent corrosion during transit. Verify that the supplier can provide a pre‑shipment inspection report and that the packaging meets ISPM 15 phytosanitary standards for wooden pallets.

What clamp types are listed in Dalian Leading Metal Ltd.’s catalogue?

The catalogue includes C‑clamps, G‑clamps (HS 8205.70), high‑duty F‑clamps for woodworking, pipe clamps of 1/2" and 3/4" size, and specialised woodworking hand‑tool clamps.

Which HS code is assigned to the G‑Clamp product?

The G‑Clamp Maker entry is recorded under HS code 8205.70, which covers hand tools and general metal fittings made of malleable or ductile iron and carbon steel.

What material grades are typically used for the listed clamps?

Typical grades are malleable cast iron 260, ductile iron 450 and carbon steel S235, providing hardness values between 150‑200 HB and static load capacities of 1‑5 kN.

What documentation should a buyer request before ordering cast iron parts?

Buyers should request a material test report, an ISO 9001 compliance certificate, and, where the market requires, a CE or CCC declaration of conformity. A detailed engineering drawing and a pre‑shipment inspection report are also advisable.

What are common lead times for standard versus custom products?

Standard clamp inventory typically ships within 30 days, while custom‑molded cast parts such as agricultural machine components or pump bodies require 45‑60 days from order confirmation.

How are the products packaged for international shipment?

Products are usually packed in moisture‑resistant wrap, placed on wooden pallets, and loaded into 20‑ft or 40‑ft containers. Pallets comply with ISPM 15 treatment to meet phytosanitary regulations.

Is there a minimum order quantity for agricultural machine parts?

The supplier generally sets a minimum order of 500 kg for bulk cast agricultural components, though the exact MOQ can vary based on part complexity and required tooling.