About Cv. Priskilla - Agriculture Supplier in Indonesia

Indonesia, with a catalogue of five distinct products, lists doors, Cornwall folding chair, Cornwall folding arm chair, round folding table, and kapok fibre. The supplier is recorded as an imported tier with a harbor trust level. The product set spans furniture items typically classified under HS chapter 94 and a natural fibre classified under HS chapter 53, although specific HS codes are not disclosed. The primary listed category is Agriculture, reflecting the inclusion of kapok fibre, a renewable cellulose material used in stuffing and insulation. No certifications are mentioned in the supplied data.

The five items represent a mix of wooden or metal furniture and a vegetal fibre. Doors are commonly produced from hardwood, engineered panels or metal sheets; folding chairs and arm chairs are often steel‑frame with polymer or wood seats; the round folding table usually combines a metal frame with a laminate or wood top; kapok fibre is harvested from Ceiba pentandra trees and sold as a bulk natural fibre. Buyers encountering such products from Indonesia should expect export volumes ranging from single containers to bulk shipments, with typical packaging in cardboard, wooden crates, or bulk bags for the fibre. No further company‑specific data on production capacity or client base is provided.

Product Range and Specialties of Cv. Priskilla

The catalogue includes four furniture items and one natural fibre. Doors listed by the supplier are generally interior or exterior panels that meet EN 14351 standards for dimensions, surface finish and fire resistance when specified. Cornwall folding chairs and arm chairs are lightweight, stackable units that typically comply with EN 581 for load‑bearing (often rated at 120 kg per seat) and are manufactured from steel or aluminum frames with polymer or wood seats. The round folding table is usually a collapsible steel frame with a laminate or wood top, sized for 60 - 80 cm diameters and fitted with locking mechanisms. Kapok fibre is a cellulose‑based, low‑density fibre with typical bulk density around 120 kg / m³, moisture content below 12 % and purity above 95 % when processed for textile or insulation use.

Industry practice for these categories includes offering multiple material grades - solid wood, engineered wood, or metal for doors; powder‑coated steel versus anodised aluminium for chairs and tables; and graded kapok fibre (e.g., standard, premium) depending on fibre length and fineness. Buyers often request specifications such as door thickness (35 - 45 mm), fire‑rating (Euroclass B‑s2,d0), chair frame tensile strength (≥150 MPa), table load capacity (≤50 kg), and fibre bulk density. Standard packaging consists of individual cardboard boxes for chairs, wooden crates for doors and tables, and bulk polypropylene bags (25 kg) for kapok fibre.

Trade and Export Information - Cv. Priskilla

Indonesia is a leading exporter of wood‑based furniture and natural fibres in Southeast Asia. Furniture items from HS chapter 94 are commonly shipped to the United States, the European Union, Japan and the Middle East, where buyers frequently require CE marking for the EU market, ISO 9001 quality management certification, and FSC or PEFC chain‑of‑custody documentation for wood products. Kapok fibre, classified under HS chapter 53, is exported mainly to textile manufacturers in China, India and Bangladesh, and to insulation producers in Europe; phytosanitary certificates and a declaration of no hazardous substances are typical import requirements. Logistically, furniture pieces are packed in 20‑foot or 40‑foot containers on wooden pallets, often with corner protectors, while bulk kapok fibre is loaded into sealed polypropylene bags placed inside a container or bulk vessel. Common Incoterms used by Indonesian exporters are FOB Jakarta or CIF destination ports. The supplier’s listed tier (imported) and trust level (harbor) indicate that the company operates through established trade channels, but no specific certifications are disclosed in the provided data.

Sourcing from Cv. Priskilla - Buyer Guidance

When sourcing doors, chairs, tables or kapok fibre from this supplier, buyers should request material data sheets that detail the substrate (solid wood, MDF, steel, aluminium), finish specifications, fire‑rating certificates (e.g., EN 13501‑1) and any relevant wood‑origin certifications such as FSC. For the natural fibre, a laboratory analysis confirming fibre length distribution, bulk density, moisture content and a phytosanitary certificate should be obtained before confirming a purchase. Typical minimum order quantities for furniture range from 50 units per style to full container loads, while kapok fibre is often ordered in metric‑tonne batches (e.g., 1 t per shipment). Lead times for Indonesian furniture manufacturers usually span 30‑60 days after order confirmation, depending on design complexity and finishing requirements. Buyers are advised to verify the supplier’s export documentation, request a pre‑shipment sample, and confirm packaging dimensions (e.g., pallet size 120 cm × 100 cm × 150 cm) to ensure smooth customs clearance.

What product categories does Cv. Priskilla list in its catalogue?

The supplier lists five products: doors, Cornwall folding chair, Cornwall folding arm chair, round folding table and kapok fibre.

Are there any certifications mentioned for Cv. Priskilla’s products?

No specific certifications are stated in the supplied information; buyers should request standard certifications such as FSC for wood, CE marking for furniture destined for the EU, and phytosanitary certificates for the kapok fibre.

What are the typical material specifications for the folding chairs?

Folding chairs from Indonesia are usually made of powder‑coated steel frames with polymer or wood seats, designed to meet EN 581 load requirements of around 120 kg per seat and often have a tensile strength of 150 MPa or higher.

How is kapok fibre normally packaged for export?

Kapok fibre is commonly packed in sealed polypropylene bags of 20‑25 kg each, stacked inside a 20‑foot or 40‑foot container with moisture content below 12 % and bulk density near 120 kg / m³.

What documentation should a buyer request before importing the doors?

Buyers should ask for a product data sheet specifying material (hardwood, MDF, metal), thickness, fire‑rating (e.g., Euroclass B‑s2,d0), and any wood‑origin certification like FSC, as well as a compliance certificate for EN 14351.

Which markets typically import the type of furniture offered by Cv. Priskilla?

Major import markets for Indonesian wood and metal furniture include the United States, European Union members, Japan and several Middle‑Eastern countries, where buyers often require CE marking, ISO 9001 and FSC documentation.

What are common lead times for furniture shipments from Indonesia?

Lead times generally range from 30 to 60 days after order confirmation, depending on product complexity, finishing processes and container availability.

What packaging standards apply to the round folding table?

The round folding table is usually shipped in a wooden crate or reinforced cardboard box, with internal cushioning to protect the tabletop surface, and secured on a standard 120 cm × 100 cm pallet for container loading.