About Chang Zhou I-Deal Imp & Exp Co., Ltd - Industrial Filters Supplier in China

China‑based Chang Zhou I-Deal Imp & Exp Co., Ltd lists nine active product lines, all falling under industrial and air filtration equipment. The catalogue includes PAKE Large Flow FRP Filter, PALL Cartridge (PP), FRP Filter Housing (Bag Cartridge), Pake Filter (FRP) Housing, FRP Filter Sets, PAKE Filter Cartridge, Microporous Folding Filter Cartridge, PP Filter Cartridge and Pall Filter. Each item is identified by its material construction - fiberglass reinforced plastic (FRP) or polypropylene (PP) - and is positioned for high‑flow or cartridge‑type filtration applications. The HS‑code family most commonly associated with these products is Chapter 84, heading 8421, which covers filtration equipment for liquids and gases.

The supplier’s product set targets large‑capacity fluid handling and air purification systems. FRP filters are typically rated for temperatures up to 200 °C and chemical resistance to acids and alkalis, while PP cartridges are used where low pressure drop and fine micron ratings are required. The range covers both bag‑type housings and folded‑media cartridges, enabling integration into water treatment, chemical processing, and HVAC installations. No additional product categories such as home‑textiles or inks are listed in the active catalogue, keeping the focus exclusively on filtration solutions.

Product Range and Specialties of Chang Zhou I-Deal Imp & Exp Co., Ltd

The nine listed items comprise FRP‑based filter housings, large‑flow FRP filter modules, and polypropylene cartridge assemblies. In the industrial filter market, FRP housings are frequently specified for temperatures between 120 °C and 200 °C, pressure ratings of 1.0 - 1.5 MPa, and flow capacities ranging from 1 m³/h to 200 m³/h depending on media size. PP cartridges are commonly produced with micron ratings from 5 µm to 0.5 µm, filtration efficiencies of 99.5 % - 99.99 % (ASTM D737), and pressure drops below 250 Pa at design flow. Buyers also look for folded‑media filters that meet ISO 2946 for water filtration and IEC 60335 for air filters. Typical material specifications include 40 % glass fiber reinforcement in FRP, melt‑blown PP media, and rubber‑coated end caps to ensure sealing integrity.

Trade and Export Information - Chang Zhou I-Deal Imp & Exp Co., Ltd

China is a major exporter of industrial filtration equipment, and products such as FRP housings and PP cartridges are routinely shipped to Europe, North America and Southeast Asian manufacturing hubs. The relevant HS‑code headings are 8421.30 for air‑filter elements and 8421.90 for other filtration devices. Importers usually require certifications such as ISO 9001 quality‑management, CE marking for EU markets, UL listing for North America, and NSF/ANSI standards for water‑treatment filters. Packaging is typically bulk‑packed in wooden crates or bulk‑bags, with a standard 20‑ft container holding up to 12 tons of filter units. Common Incoterms include FOB Shanghai or CIF Hong Kong, and shipments are subject to Chinese export controls that verify material safety data sheets (MSDS) and compliance with REACH for chemical exposure.

Sourcing from Chang Zhou I-Deal Imp & Exp Co., Ltd - Buyer Guidance

When sourcing FRP or PP filter products from this supplier, request a detailed material data sheet that confirms glass‑fiber content, resin type and temperature rating for FRP units, and melt‑blown PP grade, micron rating and pressure‑drop data for cartridges. Ask for test reports aligned with ASTM D737 (air flow) or ISO 2946 (water) to validate filtration efficiency and durability. Verify that the supplier can provide CE or UL certificates if required for the target market, and confirm packaging dimensions and weight to plan container loading. Typical minimum order quantities range from a single housing for sample evaluation up to 5 000 cartridges for bulk production, with lead times of 30 - 45 days after order confirmation.

What types of filter media does Chang Zhou I-Deal offer?

The catalogue includes fiberglass reinforced plastic (FRP) media for large‑flow housings and polypropylene (PP) media for cartridge‑type filters, covering both air and liquid applications.

Which HS code should be used for customs clearance of these filters?

Filtration equipment from this supplier generally falls under HS Chapter 84, heading 8421 - specifically 8421.30 for air‑filter elements and 8421.90 for other filter devices.

Are any certifications available for the FRP and PP filters?

Only certifications explicitly listed by the supplier can be confirmed. Buyers should request ISO 9001, CE, UL or NSF certificates as applicable to their market.

What is the typical filtration efficiency for the PP cartridges?

PP cartridges in this category are commonly tested to achieve 99.5 % - 99.99 % efficiency at a 0.5 µm particle size, measured according to ASTM D737.

How are the filters packaged for export?

Export shipments are usually bulk‑packed in wooden crates or industrial‑strength bulk bags, optimized for 20‑ft container loading.

What lead time and minimum order quantity should a buyer expect?

Lead times are typically 30 - 45 days after order confirmation, and minimum order quantities range from a single unit for sample testing to several thousand units for bulk orders.

Which industries most frequently import these filter products?

Chemical processing, water‑treatment plants, HVAC manufacturers and food‑processing facilities are the primary importers of FRP housings and PP cartridge filters.

Can a buyer request a sample before placing a full order?

Yes, the supplier can provide a sample unit for performance testing; the buyer should specify the exact product model and required test parameters when requesting the sample.