About Bright Rubber & Plastics - Rubber Items Supplier in India

India hosts Bright Rubber & Plastics, which currently lists six active products in its catalogue. All items fall under the broad rubber items category and include Rubber O‑Rings, Rubber Springs, Nylon Washers, Rubber Gaskets, Rubber Grommets and assorted Rubber Parts. The catalogue does not provide HS codes for individual items, but each product is classified within the HS Chapter 40 family for rubber and articles thereof. The supplier’s listing focuses on standard industrial components used for sealing, vibration control and mechanical fastening.

The six products cover a range of cross‑sectional shapes and material options commonly required by manufacturers. Rubber O‑Rings and Gaskets are typically supplied in metric and imperial sizes, while Rubber Springs are offered in compression and extension styles. Nylon Washers provide a non‑rubber alternative for corrosion‑resistant applications, and Rubber Grommets are used for cable and tube protection. Rubber Parts is a generic label that can include custom‑cut or molded items according to buyer specifications.

Product Range and Specialties of Bright Rubber & Plastics

Bright Rubber & Plastics’ catalogue includes Rubber O‑Rings, Rubber Springs, Nylon Washers, Rubber Gaskets, Rubber Grommets and a generic Rubber Parts line. In the rubber sealing market, O‑Rings are usually produced to ISO 3601 specifications, with durometer hardness ranging from 20 to 90 Shore A and sizes from M 2 mm up to M 200 mm. Rubber Springs are commonly manufactured from NBR, EPDM or silicone, conforming to DIN 376 or ISO 815 standards, with wire diameters from 0.5 mm to 5 mm and free‑lengths up to 200 mm. Nylon washers follow DIN 6799 or ISO 7089, typically 0.5 mm to 5 mm thick, with diameters up to 200 mm, offering chemical resistance where rubber is unsuitable. Gaskets and grommets are generally supplied in standard thicknesses (1 mm‑5 mm) and materials such as NBR, FKM or silicone, meeting ASTM D2000 or ISO 472 standards. The “Rubber Parts” category may include custom‑molded components that follow the same material grades and are often fabricated to buyer‑provided drawings.

Trade and Export Information - Bright Rubber & Plastics

India is a major exporter of rubber articles, with the majority of shipments classified under HS Chapter 40 (rubber and articles thereof). Typical export destinations for Indian rubber components include the European Union, the United States, the Middle East and Southeast Asian manufacturing hubs. Buyers in the automotive, HVAC, industrial machinery and electrical sectors usually request compliance with ISO 9001 quality management and, where relevant, ISO 14001 environmental certification. Additional certifications frequently required are REACH registration for chemical safety and specific test reports such as ASTM D2000 (rubber material classification), ASTM D412 (tensile strength) and ASTM D2240 (hardness). Standard logistics involve loading the items in 20‑ft or 40‑ft containers, with common Incoterms of FOB or CIF, and packaging in sealed cardboard boxes or bulk pallets to protect against moisture and deformation.

Sourcing from Bright Rubber & Plastics - Buyer Guidance

When sourcing from Bright Rubber & Plastics, buyers should request a material data sheet that specifies the rubber compound (e.g., NBR, EPDM, silicone) and the relevant ASTM or ISO test results. Sample orders for O‑Rings, gaskets or grommets are typically offered in a limited size range to verify fit and material compatibility before full‑scale purchase. Verify that the supplier can provide certificates of conformity for ISO 9001 or REACH, and ask for third‑party test reports covering hardness, compression set and tensile strength to ensure the products meet the buyer’s specification sheet. Confirm packaging details - such as the number of units per box, pallet configuration and moisture‑proof wrapping - as these affect handling and storage in the destination market.

What rubber O‑Ring standards does Bright Rubber & Plastics follow?

The catalogue does not list a specific standard, but O‑Rings in this segment are normally produced to ISO 3601 with hardness between 20‑90 Shore A and sizes from M 2 mm to M 200 mm. Buyers should request the supplier’s test report to confirm compliance.

Can I obtain samples of the Rubber Gaskets before placing a large order?

Yes, most suppliers of rubber gaskets provide sample packs covering common thicknesses (1 mm‑5 mm) and material grades such as NBR or FKM. Request a sample quote and specify the required dimensions to receive a representative batch.

Which certifications does Bright Rubber & Plastics hold for its rubber products?

The supplied facts do not mention any certifications. Buyers should ask the supplier to provide copies of ISO 9001, ISO 14001 or REACH registration if these are required for the intended market.

What are the typical material grades for the Nylon Washers offered?

Nylon washers are usually supplied in PA‑6 or PA‑66, conforming to DIN 6799 or ISO 7089. They provide chemical resistance and dimensional stability; ask for the material data sheet to confirm the exact grade.

How are the Rubber Springs packaged for international shipment?

Rubber springs are generally packed in sealed cardboard boxes, stacked on pallets with stretch‑wrap to prevent deformation. Confirm the number of springs per box and the pallet dimensions to ensure compatibility with container loading plans.

What documentation should I request for compliance with European import regulations?

For European buyers, request the supplier’s REACH registration proof, a material safety data sheet (MSDS), and test reports that meet ISO 9001 quality standards. These documents help verify that the rubber compounds comply with EU chemical safety and product conformity requirements.