About Beiste Group Limited - Batteries & Chargers Supplier in China

Beiste Group Limited is based in China and lists nine active products across the Batteries & Chargers and Agriculture categories. The electronic portfolio is recorded under HS chapter 85, primarily HS 8504.40 for wall and USB chargers, HS 8544.42 for a Lightning‑to‑USB cable, and HS 8507.60 for a power bank, reflecting standard customs classifications for consumer electronic power accessories. Each item specifies its housing material - typically ABS, polycarbonate or fire‑proof ABS/PC - and internal conductors of copper or copper alloy, which aligns with common industry material selections for safety and conductivity. The catalogue also includes a Lithium‑Ion / Lithium‑Polymer battery cell assembly for the power bank, a material combination widely used in portable energy storage devices.

The product list contains a US‑style Qualcomm Quick Charger 2.0, a three‑port US plug super‑fast wall charger, a EU plug charger compatible with Apple and Android devices, a portable car charger, a Shenzhen mobile phone charger with a single USB output, a 4.8 A dual‑USB fast wall charger, a USB Type‑C 2.0 cable, a Lightning‑to‑USB 8‑pin cable, and a new power bank. All chargers are described with ABS or ABS/PC housings and copper or copper‑alloy contacts, while the cables use PVC jackets with 99.99 % copper conductors. The HS codes provided map directly to the electrical equipment and insulated wire categories used by customs authorities worldwide. No additional product categories are listed beyond these nine electronic items.

Product Range and Specialties of Beiste Group Limited

The catalogue focuses on consumer‑grade charging solutions: wall adapters with output currents ranging from 2.0 A to 4.8 A, USB Type‑C cables conforming to USB 2.0 data rates, and Lightning cables designed for iPad connectivity. In the broader industry, such chargers are often certified to meet Quick Charge 2.0 or Power Delivery specifications, and cables are tested for voltage drop and tensile strength. Power banks that fall under HS 8507.60 typically house lithium‑ion or lithium‑polymer cells with capacities from 5 Ah to 10 Ah, and they are packaged in ABS/PC housings to meet impact‑resistance standards. Buyers usually expect CE marking for European markets, FCC compliance for the United States, and RoHS conformity to limit hazardous substances across all listed products.

Trade and Export Information - Beiste Group Limited

China is a major exporter of electronic power accessories, with HS 8504.40 chargers and HS 8507.60 power banks regularly shipped to North America, the European Union, and Southeast Asian markets. Export shipments are commonly packed in export‑grade cardboard cartons, placed on 20‑ft or 40‑ft containers, and shipped under Incoterms such as FOB Shenzhen or CIF destination port. Importing countries frequently require test reports for safety standards (IEC 60950‑1, transitioning to IEC 62368‑1), electromagnetic compatibility (EMC) certificates, and documentation confirming compliance with RoHS and REACH regulations. For cables classified under HS 8544.42, customs authorities often request a declaration of material composition and a test report for fire resistance and dielectric strength.

Sourcing from Beiste Group Limited - Buyer Guidance

When sourcing chargers or cables from this supplier, request CE and FCC test reports, as well as RoHS compliance certificates, to verify that the products meet major market requirements. Ask for a sample that includes the full housing and connector assembly so you can assess build quality, connector fit, and cable strain resistance. Verify that the power bank’s battery cells are accompanied by a safety data sheet and a cycle‑life test report, which are standard documents for lithium‑ion energy storage devices. Confirm packaging details - such as carton dimensions, unit count per box, and whether the items are pre‑tested for short‑circuit protection - before finalising the order.

What HS codes are used for the chargers listed by Beiste Group Limited?

The wall, USB and car chargers are classified under HS 8504.40, which covers static converters, adapters and chargers for electrical devices.

Which certifications should a buyer request for the USB and wall chargers?

Buyers should request CE marking for European compliance, FCC certification for the United States, and RoHS declarations to confirm restriction of hazardous substances.

What material composition is specified for the Lightning‑to‑USB cable?

The cable uses a PVC jacket and copper conductors rated at 99.99 % purity, as indicated in the product description.

Is there a standard test report required for the power bank’s lithium battery?

Typical imports require a safety test report covering over‑charge, short‑circuit, and thermal runaway protection, along with a battery cycle‑life performance report.

What packaging format is common for the listed chargers?

Exporters usually pack chargers in export‑grade cardboard cartons, with unit counts that fit standard 20‑ft or 40‑ft containers, following INCOTERMS such as FOB or CIF.

How can a buyer verify the electrical safety of the 4.8 A dual USB charger?

Request an IEC 62368‑1 or IEC 60950‑1 test report and an EMC compliance certificate; these documents confirm adherence to international safety and electromagnetic compatibility standards.

What typical lead time should be expected for a sample of the USB Type‑C cable?

Suppliers generally provide a sample within 7‑14 business days after order confirmation, subject to production scheduling and shipping method.

Are there any import restrictions for the ABS/PC housing material?

ABS and polycarbonate are not subject to specific import bans, but customs may require a material safety data sheet (MSDS) to confirm compliance with local fire‑safety regulations.