About Arihant Textile Traders - Machined Components Supplier in India

Arihant Textile Traders is based in India and currently lists 15 active products across its catalogue. The supplier’s offerings fall under categories such as Machined Components, Industrial Couplings, Fasteners, Washers, Hooks and Loops, and Industrial Chains. The product list includes items used in textile machinery like rubber couplings for ring frame machines, lappet hooks, spindle locks, separator holders, joint couplings for winding machines, and various gear and chain components. One listed item, the Spindle Lock for Ring Frame Machine, is specified as mild steel sheet with HS code 7318.16, which belongs to the chapter for threaded and other screwed articles of iron or steel.

The remaining catalogue entries are described without HS codes but are identifiable as typical machined parts for textile equipment, such as spiral gears, bevel gears, PIV chains, shim washers, and knotters. These components are generally manufactured from carbon steel, alloy steel, or stainless steel, matching the material families indicated by the HS code system for machined metal products. The supplier’s active product count of 15 reflects a focused portfolio aimed at textile machinery maintenance and assembly.

Product Range and Specialties of Arihant Textile Traders

The catalogue covers a range of textile‑machine components: rubber couplings, lappet hooks, spindle locks, separator holders, joint couplings, knotters, drop wires, wall adapters, socket guides, shim washers, hank indicators, spiral gears, spiral bevel gears and PIV chains. In the industry, rubber couplings are typically sized to match shaft diameters from 6 mm to 32 mm and use nitrile or EPDM elastomers rated for torque transmission up to 200 Nm. Lappet hooks and other fasteners are commonly forged from carbon steel grade 40 × 70 or stainless steel grade 304, with hardness 45‑55 HB. Gears and bevel gears for reeling machines are usually supplied as steel blanks (often 45 Mn B5) with module values between 1.0 and 3.0, tooth profile conforming to ISO 1328, and surface hardness 48‑55 HRC. PIV chains for blow‑room machines are typically made from alloy steel, heat‑treated to a tensile strength of 800‑1200 MPa and delivered in standard pitch sizes such as 6.35 mm or 9.525 mm. Washers and other shim components are generally supplied in mild steel or stainless steel with thickness tolerances of ±0.1 mm.

Trade and Export Information - Arihant Textile Traders

India is a major exporter of machined metal components, and products such as those listed by Arihant Textile Traders are frequently shipped to textile manufacturers in Bangladesh, Pakistan, the United Arab Emirates, Saudi Arabia, Europe and the United States. The HS‑code families involved - 7318 for threaded and screwed articles, 8483 for gears and gear boxes, 7312 for bolts, nuts and washers, and 7315 for chains - are routinely examined by customs for correct tariff classification and origin marking. Buyers usually request ISO 9001 quality‑management certification, CE conformity for equipment destined for the EU, and RoHS declarations when electrical integration is involved. Standard export logistics from Indian ports employ FOB or CIF terms, with packaging in wooden crates or steel pallets, moisture‑resistant liners for steel parts, and container loading in 20‑ft or 40‑ft units depending on volume.

Sourcing from Arihant Textile Traders - Buyer Guidance

When sourcing from Arihant Textile Traders, buyers should obtain a mill‑test report (MTR) for each steel‑based component, confirming chemical composition, tensile strength and hardness. For rubber couplings, a material safety data sheet (MSDS) and an elastomer hardness (Shore A) test report help verify performance under temperature and load. Requesting dimensional drawings or CAD files ensures the parts match the specific shaft sizes and gear modules required in the buyer’s equipment. Verification of HS‑code declaration, country‑of‑origin marking and any applicable export licences reduces the risk of customs delays.

What types of textile‑machine components does Arihant Textile Traders list?

The catalogue includes rubber couplings, lappet hooks, spindle locks, separator holders, joint couplings, knotters, drop wires, wall adapters, socket guides, shim washers, hank indicators, spiral gears, spiral bevel gears and PIV chains used in ring frame, winding, TFO, doubling and reeling machines.

Which HS code applies to the Spindle Lock product?

The Spindle Lock for Ring Frame Machine is listed with HS code 7318.16, which falls under the category for threaded and other screwed articles of iron or steel.

What material specifications are typical for the gears in the catalogue?

Industrial gears for reeling machines are commonly supplied in alloy or carbon steel (e.g., 45 Mn B5), with module values between 1.0 and 3.0, tooth profile conforming to ISO 1328 and surface hardness of 48‑55 HRC.

Are certifications required for these machined components?

Buyers usually request ISO 9001 quality‑management certification and, for EU shipments, CE marking. Specific material certificates such as mill‑test reports and MSDS for rubber parts are also standard.

What are typical packaging and shipping methods for these items?

Components are generally packed in wooden crates or steel pallets with moisture‑resistant liners, loaded into 20‑ft or 40‑ft containers, and shipped under FOB or CIF terms from Indian ports.

What documentation should a buyer ask for before placing an order?

Request mill‑test reports for steel parts, MSDS for rubber couplings, dimensional drawings or CAD files, HS‑code declaration, and any relevant conformity certificates such as CE or ISO.

What is the usual minimum order quantity (MOQ) for these parts?

MOQs vary by item; fasteners and washers may be ordered in batches of 500 pieces, while larger machined gears or chains typically start at one or two units per order depending on size and machining complexity.

How long is the typical lead time for production and shipment?

Lead times in the Indian machining sector range from 10‑15 working days for standard fasteners to 25‑35 working days for custom‑sized gears or chains, not including transit time from the port.