About Arcansas Srl - Bathroom Accessories Supplier in Italy

Italy hosts Arcansas Srl, which lists five active products across bathroom accessories and aluminum composite panels. The catalogue includes rigid PVC profiles, aluminum edge profiles, PVC sanitary cover, PVC cover and a PVC hygienic coved profile, each assigned to specific HS‑code families such as 7604.29 for the aluminum alloy extrusion and 3916.20 or 3917.39 for the PVC items. The supplier’s product set reflects typical building‑fitout components used in residential and commercial bathroom installations. By separating rigid, flexible and plasticised PVC grades, the list aligns with standard material classifications used in European construction supply chains.

The five items are grouped under two top categories: Bathroom Accessories and Aluminum Composite Panel. The aluminum edge profiles are made from Aluminum Alloy 6063‑T5, a common extrusion alloy cited under HS code 7604.29. PVC sanitary cover is listed under HS code 3917.39 and uses a rigid, plasticised PVC formulation, while both PVC cover and the hygienic coved profile fall under HS code 3916.20 and are described as flexible grade PVC and uPVC respectively. These classifications correspond to the broader HS chapter 39 for plastics and chapter 76 for aluminium products, which are routinely tracked in import/export documentation.

Product Range and Specialties of Arcansas Srl

Arcansas Srl’s catalogue presents rigid PVC profiles likely conforming to standard dimensions such as 20‑120 mm width and wall thicknesses from 1.5 mm to 4 mm, typical for wall and floor trim. In the aluminium segment, the edge profiles fabricated from alloy 6063‑T5 are usually extruded to tolerances of ±0.2 mm and surface‑finished to a smooth or brushed texture, matching the common EN 755‑2 specifications for aluminium extrusions. PVC sanitary covers and hygienic coved profiles are generally produced in uPVC grades meeting EN 1452 for bathroom fittings, with moisture content below 0.5 % and impact resistance measured at 30 kJ/m². Flexible PVC covers classified under HS 3916.20 often comply with EN 14768 for flexible sheets, offering tensile strength around 30 MPa and elongation at break above 300 %.

Trade and Export Information - Arcansas Srl

Italian manufacturers of aluminium extrusions and PVC building components typically ship to EU markets, the Middle East and North Africa, where demand for bathroom fittings and façade panels is strong. HS chapter 39 products such as PVC sanitary covers are subject to REACH registration and often require CE marking for construction use, while aluminium edge profiles under HS 7604.29 are frequently inspected for conformity with EN 755‑2 and may be accompanied by a material declaration sheet. Common Incoterms for these goods are FOB Italian ports (e.g., Genoa or Trieste) with subsequent containerisation in 20‑ft or 40‑ft units, palletised to protect extruded profiles. Export documentation generally includes a commercial invoice, packing list, certificate of origin and, where applicable, a test report confirming mechanical properties and fire resistance.

Sourcing from Arcansas Srl - Buyer Guidance

Buyers should request a detailed data sheet that specifies the PVC grade (e.g., uPVC, plasticised PVC), wall thickness, colour and surface finish, as well as the aluminium alloy temper and extrusion tolerance. For compliance, ask for REACH‑compliant material safety data sheets, CE conformity declarations and any ISO 9001 quality‑management certificates that the supplier can provide. Verify that the HS codes on the commercial invoice match the catalogue entries (3916.20, 3917.39, 7604.29) and that the packaging plan details pallet size, crating and moisture protection to avoid deformation during sea freight.

What types of PVC profiles does Arcansas Srl offer?

The catalogue lists rigid PVC profiles, a PVC sanitary cover (plasticised PVC), a flexible PVC cover and a uPVC hygienic coved profile, each identified under HS codes 3916.20 or 3917.39.

Which aluminium product is included in the range?

Arcansas Srl supplies aluminium edge profiles made from Aluminum Alloy 6063‑T5, classified under HS code 7604.29.

What HS codes should be expected on the shipping documents?

PVC sanitary cover uses HS 3917.39, the flexible PVC cover and hygienic coved profile use HS 3916.20, and the aluminium edge profile uses HS 7604.29.

Which certifications are typically required for these products?

Buyers usually request REACH registration, CE marking for construction use, and ISO 9001 quality‑management certification where available.

What are common quality parameters for the PVC bathroom accessories?

Typical parameters include moisture content below 0.5 %, impact resistance around 30 kJ/m², tensile strength 30 MPa and elongation at break exceeding 300 % for flexible grades.

What is the usual packaging method for aluminium edge profiles?

Aluminium extrusions are generally palletised in wooden crates, protected with edge guards, and shipped in 20‑ft or 40‑ft containers to prevent bending.

What minimum order quantities and lead times are typical?

Suppliers often set MOQ between 500 kg and 1 ton for aluminium profiles and 1,000 units for PVC accessories, with lead times ranging from 15 to 30 days after order confirmation.