Import Astm B863 Gr1 Gr2 Titanium Wire — Buy in wholesale FOB from Supplier in China

Metal Titanium Co., Ltd supplies ASTM B863 Gr1 and Gr2 commercially pure titanium wire from Baoji, Shaanxi Province, a city known as China's titanium valley. The wire covers diameters from 0.1 mm to 7 mm in straight lengths or coil form, with Grade 1 offering maximum ductility and formability and Grade 2 providing higher tensile strength while retaining excellent corrosion resistance. Both grades conform to ASTM B863, AWS A5.16, and ASTM F67 standards, and the material is supplied in annealed (M) condition after hot rolling and stretching processes. Surface finish options include pickled or polished, selected according to end-use requirements in welding, medical device fabrication, or chemical processing equipment.

Gr1 titanium wire contains oxygen at 0.18% maximum and iron at 0.20% maximum, yielding a minimum tensile strength of 240 MPa and typical elongation above 24%, which suits deep drawing and complex forming operations. Gr2 permits slightly higher interstitial content, oxygen to 0.25% and iron to 0.30%, raising minimum tensile strength to 345 MPa with elongation typically above 20%. Both grades exhibit exceptional resistance to seawater, chloride solutions, and oxidising acids, a property inherited from the stable titanium oxide film that reforms spontaneously when damaged. Industry practice typically requires ultrasonic testing for medical implant wire and dye penetrant inspection for aerospace welding filler material, though specific certification scope should be confirmed directly with the supplier.

Primary applications include gas tungsten arc welding (GTAW) filler wire for titanium fabrication, surgical implant components such as bone pins and fixation wires under ASTM F67, and anode hangers for electroplating baths where the wire's corrosion resistance eliminates contamination. Buyers span aerospace contractors, medical device OEMs, chemical engineering firms, and plating equipment manufacturers. The supplier's Baoji location places it within the densest cluster of titanium producers in China, with access to sponge feedstock from local reduction plants. Trade terms, MOQ, and lead time are not stated in the listing data and should be confirmed with Metal Titanium Co., Ltd directly.

Metal Titanium Co., Ltd operates from Room 1308, Block B, in Baoji heat-Tech Zone, Baoji, Shaanxi Province, with a registered address also listed at South Section, No.2 West Road, Economic And Technological Development Zone, Caijiopo, Baoji. The supplier's trust tier is classified as 'harbor', and its response rate is recorded at 0.00% with an average response time of zero hours, indicating no quotable engagement data is available from the platform. The listing presents the company as a processor and trader of commercially pure and alloyed titanium mill products, with particular emphasis on wire forms for welding and medical applications.

No information is provided about year of establishment, number of employees, annual revenue, production capacity, or named client references. The supplier does not claim ISO 9001, AS9100, or FDA registration status in the available data. Buyers should verify factory audit reports, material test certificates, and quality management scope before placing orders. Baoji's industrial concentration offers logistical advantages for titanium sourcing, but due diligence on Metal Titanium Co., Ltd's specific capabilities remains essential.